Professional Documents
Culture Documents
P02ee00 - P02ef00 - P02F000 - P02F100 - P060694 - P062D00
P02ee00 - P02ef00 - P02F000 - P02F100 - P060694 - P062D00
Print Exit
1GD-FTV ENGINE CONTROL ECD SYSTEM(w/ DPF [Production date from 2021/08]) P02EE00 Cylinder 1 Injector
Circuit Range/Performance P02EF00 Cylinder 2 Injector Circuit Range/Performance P02F000 Cylinder 3 Injector
Circuit Range/Performance P02F100 Cylinder 4 Injector Circuit Range/Performance P060694 Control Module
Processor Unexpected Operation P062D00 Fuel Injector Driver Circuit Performance Bank 1
DESCRIPTION
The ECM monitors the microcomputer for normal operation by calculating and comparing the injection volume command values
from 2 systems.
It also monitors the injector operation circuit for malfunctions by back-calculating the actual injection volume from the injection
duration returned by the injector operation circuit for each cylinder and comparing it with the injection volume command value.
DTC Detection
DTC No. Detection Item Trouble Area MIL Memory Note
Condition
When any condition
below is met:
· Power continues
to be supplied
to the No. 1
cylinder injector
· The actual
injection
operation status
does not match
Cylinder 1 Injector the target SAE
P02EE00 Circuit injection ECM Comes on DTC stored Code:
Range/Performance volume of the P02EE
No. 1 cylinder
· The injector
power duration
deviates from
the target
injection
volume of the
No. 1 cylinder
https://global.service3s.toyota.co.jp/home/en/N00147/repair/contents/RM100000001WWR4.html?PUB_TYPE=RM&MODE=1 1/5
15:31, 01/02/2023 Print-Toyota Service Information
DTC Detection
DTC No. Detection Item Trouble Area MIL Memory Note
Condition
to the No. 3
cylinder injector
· The actual
injection
operation status
does not match
the target
injection
volume of the
No. 3 cylinder
· The injector
power duration
deviates from
the target
injection
volume of the
No. 3 cylinder
https://global.service3s.toyota.co.jp/home/en/N00147/repair/contents/RM100000001WWR4.html?PUB_TYPE=RM&MODE=1 2/5
15:31, 01/02/2023 Print-Toyota Service Information
DTC Detection
DTC No. Detection Item Trouble Area MIL Memory Note
Condition
MONITOR DESCRIPTION
· The ECM calculates and compares the injection volume command value from 2 systems, and stores P060694 if the
accelerator pedal recognition value, minimum engine torque or target injection volume is higher than the original target.
· The ECU back calculates the actual injection volume from the injection duration returned by the injector operation circuit
for each cylinder. When power continues to be supplied to the injector even if there is no injection volume command, the
injection operation status does not match the target injection volume, or the injector power duration deviates from the
target injection volume, P02EE00, P02EF00, P02F000 or P02F100 is stored.
· P062D00 is stored if a malfunction is detected in the fail-safe function (that stops injection) during a fuel injection control
malfunction.
NOTICE:
After replacing the ECM, the new ECM needs registration (Click here Engine / Hybrid System>1GD-FTV (ENGINE
CONTROL)>ECD SYSTEM (w/ DPF [Production date from 2021/08])>REGISTRATION) and initialization (Click here Engine /
Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF [Production date from 2021/08])>INITIALIZATION).
HINT:
Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When
troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or
not, and other data from the time the malfunction occurred.
PROCEDURE
https://global.service3s.toyota.co.jp/home/en/N00147/repair/contents/RM100000001WWR4.html?PUB_TYPE=RM&MODE=1 3/5
15:31, 01/02/2023 Print-Toyota Service Information
1.CHECK FOR ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P02EE00, P02EF00, P02F000, P02F100, P060694
AND/OR P062D00)
b. Turn the engine switch on (IG) and turn the GTS on.
c. Enter the following menus: Powertrain / Engine and Transmission / Trouble Codes.
Powertrain > Engine and Transmission > Trouble Codes
Execute
HINT:
If any DTCs other than P02EE00, P02EF00, P02F000, P02F100, P060694 and/or P062D00 are output, troubleshoot those
DTCs first.
2.REPLACE ECM
GO TO DTC CHART
Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF [Production date
from 2021/08])>DIAGNOSTIC TROUBLE CODE CHART
2.REPLACE ECM
Result:
Proceed to
NEXT
NEXT
b. Turn the engine switch on (IG) and turn the GTS on.
https://global.service3s.toyota.co.jp/home/en/N00147/repair/contents/RM100000001WWR4.html?PUB_TYPE=RM&MODE=1 4/5
15:31, 01/02/2023 Print-Toyota Service Information
Execute
g. Turn the engine switch on (IG) and turn the GTS on.
h. Enter the following menus: Powertrain / Engine and Transmission / Trouble Codes.
Powertrain > Engine and Transmission > Trouble Codes
Execute
Result:
Proceed to
NEXT
NEXT
END
https://global.service3s.toyota.co.jp/home/en/N00147/repair/contents/RM100000001WWR4.html?PUB_TYPE=RM&MODE=1 5/5