Professional Documents
Culture Documents
Sales Information Changes On Series
Sales Information Changes On Series
Liebherr-Hydraulikbagger GmbH
With this sales information we wish to inform you regularly about new options and changes
to the existing configurations for Liebherr wheeled excavators as well as material handling
machines*. These new options and configurations are available in the Lias configuration
system and will al.so be partly included in the future versions of the equipment manual for
“wheeled excavators” and “material handling machines”.
You can navigate quickly by clicking on the topic concerned. You will then be taken
automatically to a page which shows details of the related option or configuration. New items
in the list are marked with the add on „NEW“.
NEW: Change of the Lumen units for the LED headlights page 1
* Coming along with the change presented in the sales information „R 914 Compact manufactured at Colmar“, news of this
machine will no longer be listed within this sales information.
The availability of the new options respectively changes in configurations are marked regarding the following logic which is
similar to the one used in brochures: ● Standard + Option +* On request ✘ Not available
The brighter illumination of the working area results in the following customer benefit for you:
High working comfort and protection for the eyes even when
working under dimmed or dark working conditions.
High safety in the working area around the machine since people
and items can be seen very quickly.
The effect of this change and the thus resulting illumination intensity based on the two different
Lumen units is displayed in the following two figures (see the scale for the different colors).
* Halogen headlights are not affected by this change. Please find further price information in the Lias quotation system.
A 910 A 912 A 914 A 918 A 922 / 924 A 924
A 914 A 916 A 918 A 920 A 924
Compact Compact Compact Compact Rail Heavy Lift
+ + + + + + + + + + +
LH 22 LH 24 LH 26 LH 30 LH 35 LH 40 LH 50 LH 60 LH 80 LH 110
+ + + + + + + + + +
EMT sales information 19.12.2017 Page 2
Sales information
Changed setting options of the working hydraulics
For the wheeled excavators and material handing machines, it is now possible to adapt the
dynamics of the machine even better to customer requirements due to an advancement in
the hydraulic system of the new machine generation.
The standard setting which is selected at the factory covers the majority of customer require-
ments. For special applications or requirements of individual operators, a service technician
can change this setting flexibly without altering the hardware, to meet the demands of all
customers in an optimum way.
+
Adjustable by a
service technician
dynamics of P+
P
(Power-Plus)
(Power)
the hydraulics E (Eco)
S (Sensitive)
Adjustable by a
service technician
-
Machine Stage IIA Stage IIIB Stage IV
generation Tier 3 Tier 4i Tier 4f
The following customer benefits are resulting of this new, flexible hydraulic setting:
This change will be available for various models starting at the below-mentioned delivery time*:
For the LH 35 M Timber, the new undercarriage version "stabiliser and dozer blade rear
3,000 or 3,300 mm wide, outrigger front" (see fig.) is available immediately. You can find
these versions in the Lias product configurator under "Undercarriage" > "Stabilising & driving" >
"Outrigger variants".
This undercarriage version has been specially designed for trailer operation. For long driving
distances, a combination of log loader and trailer is the optimum and most efficient choice. This
yields the following customer benefit for this use:
High safety due to the increased stability during loading and unloading of
the trailer over the entire swivelling range of 360°.
High productivity during loading cycles in timber handling. This is
achieved through an increased load carrying capacity of the machine. As a
result of this new stabilising variant, the load carrying capacity can be
increased by up to 33% – in comparison to the conventional version of
blade stabilisation.
In the version shown, the blade can continue to be used as a stabilizer as well as additionally
for clearing work as usual.
At the following link, you can see the LH 35 M Timber with the new undercarriage version in
action: https://www.youtube.com/watch?v=Uuy_0-ypqT8
EMT sales information 19.12.2017 Page 4
Sales information
Air pre-filter with dust extraction available again
The air pre-filter with dust extraction can be selected for all machines with the Liebherr D924
engine in the Lias configuration system effective immediately. This option is therefore
available for all wheeled excavators and material handling machines of stage IV (Tier 4f).
The air pre-filter with dust extraction (cyclone filter, see fig.)
serves as a supplement and is upstream of the standard
two-stage air filter. As a result, a very effective pre-cleaning
of the intake air flow can be achieved, which results in a
dust extraction rate of up to 98% of all particles up to 5 μm.
When the air pre-filter with dust extraction is used, the following customer benefit
can be achieved with respect to profitability:
+ + + + + + + + + + +
LH 22 LH 24 LH 26 LH 30 LH 35 LH 40 LH 50 LH 60 LH 80 LH 110
+ + + + + + + + + +
EMT sales information 19.12.2017 Page 5
Sales information
Conversion of the camera layout on the display
As part of the cabin facelift (see sales information 30.03.2016), the side area monitoring with
camera was also included as standard. Subsequent to this modification, the display was also
redesigned showing both camera images at the same time and therefore still complies with the
latest legal requirements. This modification (see figures below) comes into force immediately
for all delivered machines.
Customer benefit: Thanks to this new, optimized display, driver comfort as well as safety at
the building site can be increased.
Permanent display of the rear area and side area monitoring in large format
for a better overview of the danger zone.
Thus, if you are in another menu, the display returns automatically to the
standard display after 10 sec (the interval can be set individually between 3
and 15 sec) when the safety lever/side console is down.
At the top edge of the display, status and error messages are shown.
At the bottom edge of the display, the most important information, such as
operating modes, filling levels etc. are displayed (this may vary depending
on the machine type).
* Machines with Stage IV / Tier 4f from the beginning with the new version, regardless of the machine’s date of delivery.
The three main design changes and the resulting customer benefits are listed below:
The mudguards cover the front wheels to a higher degree and therefore
protect better against the contamination of the machine and damage to the
headlights.
The mudguards are now steering with the wheels on the steering axle, which
supports a better retention of dirt even when cornering.
The new design concept allows simple and comfortable retrofitting of the
mudguards, saving time and costs.
The mudguards continue to be available as an option for all machines that are marked in the
table below. This applies to all selectable undercarriage variants in the Lias offer system, as
well as the standard tire variants.
The exception is the "Michelin XF“ tire, which cannot be selected in combination
with the new mudguard system due to its larger dimensions.
✘ ✘ + + + + + ✘ ✘ ✘ ✘
This mirror is still necessary for these two machines based on the position of
their attachment with the swivel bearing in order to enable an optimal visibility.
● – – ● ● ● ● ● ● ● ● ●
LH 22 LH 24 LH 26 LH 30 LH 35 LH 40 LH 50 LH 60 LH 80 LH 120
● ● ● ● ● ● ● ● ● –
Starting from delivery date 01/06/2015, the horn will be located on the left joystick as
standard, as shown in the following illustrations:
Left joystick: without proportional control Left joystick: with proportional control
You will still be able to offer the option of having the horn placed in the footwell as it was
previously (foot-operated switch). You will find this option on the Lias product configurator
under "Cab" – "Operation & Work" – "Additional Equipment":
Horn activation through the joystick will remain available even if the option of the foot-operated
switch in the footwell has been chosen.
● ● ● ● ● ● ● ● ● ● ●
* Also available for R 914 Compact