Control Valve Handbook | Chapter 9: Standards and Approvals
9.1 Control Valve Standards 9.1.3 European Committee for
Standardization (CEN) Numerous standards are applicable to control valves. International and global 9.1.3.1 European Industrial Valve standards are becoming increasingly Standards important for companies that EN 19, Marking participate in global markets. Following is a list of codes and standards that have EN 558-1, Face-to-Face and Center- been or will be important in the design to-Face Dimensions of and application of control valves. Metal Valves for Use in Flanged Pipe Systems - Part 1: PN- 9.1.1 American Petroleum Institute Designated Valves (API) EN 558-2, Face-to-Face and Center-
Spec 6D, Specification for Pipeline
to-Face Dimensions of Metal Valves for Use in Flanged Valves (Gate, Plug, Ball, and Check Pipe Systems - Part 2: Class- Valves) Designated Valves 598, Valve Inspection and Testing EN 593, Butterfly valves 607, Fire Test for Soft-Seated EN 736-1, Terminology - Part 1: Quarter-Turn Valves Definition of Types of Valves 609, Lug- and Wafer-Type EN 736-2, Terminology - Part 2: Butterfly Valves Definition of Components of Valves EN 736-3 Terminology - Part 3: 9.1.2 American Society of Definition of Terms Mechanical Engineers (ASME) EN 1349, Industrial Process B16.1, Cast Iron Pipe Flanges and Control Valves Flanged Fittings EN 12266-1,Testing of Valves B16.4, Gray Iron Threaded - Part 1: Tests, Test Procedures Fittings and Acceptance Criteria B16.5, Pipe Flanges and Flanged EN 12516-1, Shell Design Fittings (for steel, nickel-based Strength - Part 1: Tabulation alloys, and other alloys) Method for Steel Valves B16.10, Face-to-Face and End-to-End EN 12516-2, Shell Design Dimensions of Valves (see ISA Strength - Part 2: Calculation standards for dimensions for Method for Steel Valves most control valves) EN 12516-3, Shell Design B16.24, Cast Copper Alloy Pipe Strength - Part 3: Experimental Flanges and Flanged Fittings Method B16.25, Butt Welded Ends EN 12627, Butt Weld-End Design B16.34, Valves - Flanged, EN 12760, Socket Weld-End Threaded, and Welding End Design B16.42, Ductile Iron Pipe Flanges EN 12982, End-to-End Dimensions and Flanged Fittings for Butt Weld-End Valves B16.47, Large Diameter Steel Flanges (NPS 26 through NPS 60)