Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

NFL / FFP

UHF RFID Antenna Series


User Guide
Scannel UHF RFID Antenna Series
User Guide
VERSION: 1.0 REVISION DATE: 06/03/2019

All rights reserved. No parts of this work may be reproduced in any form or by any means -
graphic, electronic, or mechanical, including photocopying, recording, taping, or information
storage and retrieval systems - without the written permission of the publisher.

Products that are referred to in this document may be either trademarks and/or registered
trademarks of the respective owners. The publisher and the author make no claim to these
trademarks.

While every precaution has been taken in the preparation of this document, the publisher
and the author assume no responsibility for errors or omissions, or for damages resulting
from the use of information contained in this document or from the use of programs and
source code that may accompany it. In no event shall the publisher and the author be liable
for any loss of profit or any other commercial damage caused or alleged to have been
caused directly or indirectly by this document.

Revision History

Version Date Name Description

1.0 06/03/2019 Christian Tan Initial Version

Page 2
! of !10
Table of Contents
Introduction to NFL/FFP .................................................................................4
NFL / FFP Specifications ..................................................................................5
NFL / FFP Dimensions .....................................................................................6
NFL150 and FFP150 *Measurements in mm ..................................................................6
NFL300 and FFP300 *Measurements in mm .................................................................7
NFL / FFP Installation ......................................................................................8

Page !3 of !10
Introduction to NFL/FFP
The Scannel UHF RFID Antenna Series includes the Near-Field (NFL) Antennas for close
range applications and the Far-Field (FFP) for long range applications. Our antenna series
provides high performance in the Ultra High Frequency bandwidth for RFID applications.
Scannel’s antenna designs are developed and fine-tuned by professional RF engineers to
achieve great accuracy in all facets of antenna performance.

The NFL and FFP antennas are designed with a slim profile for easy installation. Each series
has two available dimensions, 150mm and 300mm. The following are the main features of
each antenna series:

1. NFL Series - Multi-region frequency


Precise close range read area
Fine-tuned design to prevent misreads

2. EBD Series - Long range read area


Available in US and EU frequency

Page 4
! of 10
!
NFL / FFP SpecificationsUHF Antenna Series
RFID Solutions

UHF RFID
Antenna Series
NFL Series FFP Series
The NFL Series is suitabe for Near-Field applications The FFP Series is designed for Long Range
such as POS Systems in Retail, Libraries, table-top applications such as gates and portals for ware-
solutions, or other applications with demand for house management, asset management, access
close and accurate read range. control, logistics, etc.

NFL150 NFL300 FFP150 FFP300

Electrical Specs:
865Mhz - 868Mhz 865Mhz - 868Mhz
Frequency 865Mhz - 928Mhz 865Mhz - 928Mhz
902Mhz - 928Mhz 902Mhz - 928Mhz
Gain -7.5dBi ±0.5 -5dBi ±0.5 3dBi ±0.5 7dBi ±0.5

Impedance 50Ω 50Ω 50Ω 50Ω

VSWR 2:1 2:1 2:1 2:1

Antenna Type Directional Directional Directional Directional

Polarization LHCP LHCP LHCP LHCP

Half Beamwidth ±50 degrees ±30 degrees ±50 degrees ±30 degrees

Mechanical Specs:
Dimension(mm) 195 x 165 x 25 360 x 290 x 25 195 x 165 x 25 360 x 290 x 25

Weight(kg) 0.35 1.20 0.35 1.20

Casing ABS Plastic

Connector SMA-F

Mounting Screw Type

Page !5 of !10
NFL / FFP Dimensions
NFL150 and FFP150

*Measurements in mm

Page 6
! of !10
NFL300 and FFP300

*Measurements in mm

Page 7! of !10
NFL / FFP Installation
1. Prepare the screws.

2. Mount on the wall or desired location using the dimensions indicated above.

3. For VESA mounting, it is recommended to fabricate a metal plate with VESA screw holes
as an adapter for the NFL/FFP Antenna and the VESA mounts.

Page !8 of !10
Page 9
! of !10
For more information:

Scannel RFID
info@scannel.net
www.scannel.net
+886-2-26954214

Page !10 of !10

You might also like