Professional Documents
Culture Documents
RAF-P YELLOW Fire Ret FO 2515 - EN - Rev00
RAF-P YELLOW Fire Ret FO 2515 - EN - Rev00
0 of the 30/01/2012
RAF-P YELLOW
PU Yellow Cycle
Renner Italia S.p.A. via Ronchi Inferiore,34 – 40061 Minerbio, Bologna Italy Tel +39.051.6618211 Fax +39.051.6606312 info@renneritalia.com www.renneritalia.com
MANUFACTURER:
RENNER ITALIA S.p.A.
Via Ronchi Inferiore 34
40061 Minerbio (Bologna)
tel 051-6618211
fax 051-6606312
APPLICATION METHOD:
Wooden support preparation: Wipe the surface and sand paper with 120 – 150 abrasive grit removing
all possible residues of old films.
By weight:
Basecoat preparation for the
application: Basecoat FL0511 100 %
Hardener FC1110 50 %
By weight:
Topcoat preparation for the
application: Yellow topcoat FO2515 100 %
Hardener FC1110 50 %
Application method : By spray
2
Apply 2 white basecoats FL0511 with 150 g/m for each coating.
Drying time: 24 h. Sanding slightly with 320 grit paper.
2
Products application: Apply one yellow topcoat FO2515 with 150 g/m for each coating.
2
Total application quantity : 450 g/m .
MAINTANANCE:
Once the product dried out it has excellent chemical resistance properties and can therefore be treated with
normal cleaning products
Date: 30/01/2012
The product has unlimited shelf life. However, after prolonged storage, some settlement may occur.
It is therefore advisable to homogenize the product well before use.
Anti-heat : do not store at temperatures higher than 55 °C. In certain environmental conditions the pr oduct
can be specially subject to humidity. Avoid using it in highly humid environments.
Mix well before use.
TEST SUPPORT.
Date: 30/01/2012