Professional Documents
Culture Documents
Wood Door Specifications
Wood Door Specifications
Wood Door Specifications
Maximum Size: 4' O'~ X 8'' O'' (Minimum Door Height 4' 6''.)
Core: Particleboard LD-2; Meets or exceeds requirements of ANSI A208.1 and CS236-66.
Lumber and strand core also available. Lead lined available.
Rails: 11/4'' softwood bonded to core. Larger rails available; bonded to core. (Stile and rail
frame dimensions may vary due to hardware specifications.)
Faces: Only available with thin faced 2-ply Rotary Natural Birch and Plain Sliced Red Oak;
MDF substrate. ·
Lites and Louvers: Total areas of openings must not exceed 40% of door face area or 50%
of door height. Must be minimum of 5'' from door edges.
Prefitting: May be prefit to net sizes and machined for hardware as specified.
Finishing: Both species available raw or with water-borne stain base UV finish that meets
or exceeds WDMA or AWi system TR-6. EPA and California Air Resources Board (CARB)
approved.
Warranty: Two-year limited warranty for original installation. See our website for details.
\
\ .
APC-2 Heavy Duty Commercialfor Hospitals, Schools and Offices
Maximum Size: 4' O'' X 10' O'' (Minimum Door Height 4' 6''.)
Core: Particleboard LD-2; Meets or exceeds requirements of ANSI A208.1 and CS236-66.
Lead lined available. (lLD-1 core used for plastic laminate faces.)
Rails: 11/4'' minimum; softwood; bonded to core. (Stile and rail frame dimensions may
vary due to hardware specifications.)
Faces: All commercially available Premium Grade 2-Ply hardwood species; high density
fiberboard (HOF); and high pressure decorative laminates (HPDL.)
Lites and Louvers: Total areas of openings must not exceed 40% of door face area or 50%
of door height. Must be minimum of 5'' from door edges.
Prefitting: May be prefit to net sizes and machined for hardware as specified.
Finishing: All species available raw or with water-borne stain base UV finish that meets
or exceeds WDMA or AWi system TR-6. EPA and California Air Resources Board (CARB)
approved.
Warranty: Lifetime warranty for original installation. See our website for details.
Core: Particleboard LD-2; Meets or exceeds requirements of ANSI A208.1 and CS236-66.
Lumber and strand core also available. Lead lined available. (1LD-1 core used for plastic
laminate faces.).,
Rails: 11/4'' minimum softwood; hardwood optional; bonded to core. (Stile and rail frame
dimensions may vary due to hardware specifications.)
Faces: All commercially available Premium Grade 2-Ply hardwood species; high density
fiberboard (HOF); and high pressure decorative laminates (HPDL.)
Lites and Louvers:Total areas of openings must not exceed 40% of door face area or 50%
of door height. Must be minimum of 5'' from door edges.
Prefitting: May be prefit to net sizes and machined for hardware as specified.
Finishing:All species available raw or with water-borne stain base UV finish that meets
or exceeds WDMA or AWi system TR-6. EPA and California Air Resources Board (CARB)
approved.
Warranty: Lifetime warranty for original installation. See our website for details.
Core: ArchitecturalLumber Core; One specie of edge glued, low-density, kiln-dried wood
blocks of random lengths and staggered joints; bonded to stiles and rails. Lead lined avail-
able.
Rails: 11/4'' minimum; softwood; bonded to core. (Stile and rail frame dimensions may
vary due to hardware specifications.)
Faces: All commercially available Premium Grade 2-Ply hardwood species; high density
fiberboard (HOF.) Not recommended for plastic laminate faces.
Lites and Louvers:Full lite available with no less than 6'' stile width and top height, and
10'' bottom height. No hardware preps within 2 1/4'' from lite/louver opening.
Lites and Louvers:Total areas of openings must not exceed 40% of door face area or 50%
Prefitting: May be prefit to net sizes and machined for hardware as specified.
Finishing:All species available raw or with water-borne stain base UV finish that meets
or exceeds WDMA or AWi system TR-6. EPA and California Air Resources Board (CARB)
approved.
Warranty: Lifetime warranty for original installation. See our website for details.
Core: Particleboard LD-2; Meets or exceeds requirements of ANSI A208.1 and CS236-66.
Lead lined available.
Rails: 11/4'' softwood bonded to core. Larger rails available. (Stile and rail frame dimensions
may vary due to hardware specifications.)
Faces: All commercially available Premium Grade 2-Ply hardwood species; high density
fiberboard (HDF); and high pressure decorative laminates (HPDL.)
./''
.r Adhesives: Type 11 interior.
Lites and Louvers: Full lite available with no less than 6'' stile width and top height, and 10''
bottom height. No hardware preps within 2 1/4'' from lite/louver opening.
Prefitting: May be prefit to net sizes and machined for hardware as specified.
Finishing: All Species available raw or with water-borne stain base UV finish that meets or
exceeds WDMA or AWi system TR-6. EPA and California Air Resources Board (CARB) ap-
proved.
Warranty: Lifetime warranty for original installation. See our website for details.
Environmental Features: LEED credits available; No Added Urea Formaldehyde (NAUF) and
FSC (Forest Stewardship Council) components available.
Maximum Size: 4' O'' X 10' O'' (Minimum Door Height 4' 6''.)
Rails: 11/2'' top and 1'' bottom Georgia Pacific FireStop. (Stile and rail frame dimensions
may vary due to hardware specifications.)
/
- Faces: All commercially available Premium Grade 2-Ply hardwood species; high density
fiberboard (HOF); and high pressure decorative laminates (HPDL.)
•
Lites and Louvers: Please see our 45, 60, and 90 minute fire rated specification sheets on
our website for lites and louvers criteria.
Prefitting: May be prefit to net sizes and machined for hardware as specified.
Finishing: All Species available raw or with water-borne stain base UV finish that meets
or exceeds WDMA or AWi system TR-6. EPA and California Air Resources Board (CARB)
approved.
Warranty: Lifetime warranty for original installation. See our website for details.
' Core: Structural Composite LumberCore: One specie of laminated structural composite
strand lumber; kiln dried and glued together. Core bonded to stiles and rails. Lead lined
available.
J Faces: All commercially available Premium Grade 2-Ply hardwood species; high density
fiberboard (HDF); and high pressure decorative laminates (HPDL.)
Lites and Louvers: Full lite available with no less than 6'' stile width and top height, and
10'' bottom height. No hardware preps within 2 1/4'' from lite/louver opening.
Prefitting: May be prefit to net sizes and machined for hardware as specified.
Finishing: All Species available raw or with water-borne stain base UV finish that meets
or exceeds WDMA or AWi system TR-6. EPA and California Air Resources Board (CARB)
approved.
Warranty: Lifetime warranty for original installation. See our website for details.
Core: Particleboard lLD-1; Meets or exceeds requirements of ANSI A208.1 and CS236-66.
Lead lined available.
Rails: 11/4'' softwood up to 2 1/2'' laminated hardwood; bonded to core. (Stile and rail
frame dimensions may vary due to hardware specifications.)
Faces: Some faces may be backed with HOF substrate. Not recommended for lumber
(stave) core doors. Matching plastic edges are recommended.
Lites and Louvers: Total areas of openings must not exceed 40% of door face area or 50%
of door height. Must be minimum of 5'' from door edges.
Prefitting: May be prefit to net sizes and machined for hardware as specified.
Warranty: Lifetime warranty for original installation. See our website for details.