Professional Documents
Culture Documents
Analyzers
Analyzers
HGY2028 on-line conductivity meter (Conductivity table) is a high precision and high intelligent industrial analyzer, its structure
is simple, functional, easy to use, little maintenance, can be used for thermal power plants, petrochemical, pharmaceutical, food
and environmental protection industries in the process of continuous monitoring of water conductivity.
Specifications
Measuring range: 0.01 ~ 20.0 μ S / cm (with 0.01 conductivity); 1 ~ 200.0 μ S / cm (with
0.1 conductivity); 1 ~ 2000 μ S / cm (with conductivity 1.0)
Temperature: 0 ~ 60 ℃, 0.1 ℃ Resolution
Accuracy: less than 1% of measured value or ± <0.4μ S / cm × probe constant
Automatic temperature compensation range: 0 ~ 60 ℃ (25 ℃ basis)
Isolated Output: 4 ~ 20mA (Load resistance <750Ω)
The number of data storage: 1 month (1 point / 5 min)
Continuous power-down data retention time: > 6 years
Power: AC 220V ± 10%, 50 ± 1Hz
Communication Interface: RS485
Protection: IP 65 rating, anti-corrosion rack
Dimensions: second table 144 (L) × 144 (W) × 266 (depth) mm
Hole Size: 138 × 138 mm
Installation: panel-mounted
Weight: 1.2Kg
Working conditions: ambient temperature 0 ~ 50 ℃; relative humidity "85%
Specifications
Measuring range: 0.00 ~ 14.00 pH, Resolution 0.01 pH
Temperature: 0 ~ 60 ℃, 0.1 ℃ Resolution
Accuracy: ± 0.02 pH or ± 2 mA
Automatic temperature compensation range: 0 ~ 60 ℃ (25 ℃ basis)
Input impedance: > 1012 Ω
Isolated Output: 4 ~ 20 mA (load resistance <750 Ω)
Communication Interface: RS485
Protection: IP 65 rating, anti-corrosion rack
The number of data storage: 1 month (1 point / 5 min)
Continuous power-down data retention time: > 6 years
Power Supply: AC 220 V ± 10%, 50 ± 1 Hz
Dimensions: second table 144 (L) × 144 (W) × 266 (depth) mm
Hole Size: 138 × 138 mm
Installation: panel-mounted
Weight: 1.2 Kg
Working conditions: ambient temperature 0 ~ 50 ℃ Relative humidity "85%
FIA-33M- type silicate Analyzer
FIA-33M-type silicate analysis (silicon sheet) is a photonics technology, the use of advanced intelligent equipment line analyzer,
it applies to power plants, petrochemical, pharmaceutical, semiconductor and other industries except salt water, steam,
condensate , furnace determination of trace silicate. Advanced technology, unique design, minimal maintenance, allowing users
to enjoy a new work ethic.
Principle instrument
Under acidic conditions, the reaction of silicate and ammonium silicon molybdenum yellow, and then reduced to molybdenum
blue reducing agent, and then determined by spectrophotometry. Adding oxalic acid to mask the interference of phosphate ion.
Institutional instruments
Equipment from the circuit systems, chemical reagent flow path and box three unit structure.
Circuit system: including single-chip computer systems, LCD monitors, control circuits and so on.
Chemical Flow: including diaphragm pumps, control valves, filters, photometric detector and so on.
Reagent box: for placing reagent bottle.
Main Specifications
Measuring range: 0 to 100 micrograms / l; 0 to 2000 mg / l
Accuracy: 1% (full scale)
Measurement reproducibility: 1% (full scale)
Sample conditions: temperature of 5 ~ 40 ℃, the sample pressure of 0.1 Mpa, flow 50 ml / min
Measurement time: 12 min
Reagent consumption: 4 × 2.0 liters / month
Power Supply: AC220V 50Hz Power 150W
Signal output: 4 ~ 20 mA isolated RS232C or RS485 serial port (optional)
Dimensions (mm): 700 (high) × 500 (W) × 310 (D)
Hole Size (mm): 670 (high) × 470 (W)
Weight: 30Kg
FIA-33M-type phosphate analyzer
FIA-33M-based phosphate analysis (P form) is a photonics technology, the use of advanced intelligent equipment line analyzer, it
applies to power plants, petrochemical, pharmaceutical, semiconductor and other industries boiler determination of phosphate
in water . Advanced technology, unique design, minimal maintenance, allowing users to enjoy a new work ethic.
Principle instrument
Under acidic conditions, phosphate and vanadium molybdate to form a yellow complex with vanadium molybdenum yellow
phosphorus, and then determined by spectrophotometry.
Institutional instruments
Equipment from the circuit systems, chemical reagent flow path and box three unit structure.
Circuit system: including single-chip computer systems, LCD monitors, control circuits and so on.
Chemical Flow: including diaphragm pumps, control valves, filters, photometric detector and so on.
Reagent box: for placing reagent bottle.
Main Specifications
Measuring range: 0 to 3 mg / l; 0 to 5 mg / l; 0 to 10 mg / l; 0 to 20 mg / l
Accuracy: 1% (full scale)
Measurement reproducibility: 1% (full scale)
Sample conditions: temperature of 5 ~ 40 ℃, the sample pressure of 0.1 Mpa, flow 50 ml / min
Measuring time: 6 min
Reagent consumption: 3.0 liters / month
Power Supply: AC220V 50Hz Power 150 W
Signal output: 4 ~ 20 mA isolated RS 232C or RS485 serial port (optional)
Dimensions (mm): 700 (high) × 500 (W) × 310 (D)
Hole Size (mm): 670 (high) × 470 (W)
Weight: 30Kg
FIA-33M type hydrazine analyzer (ammonium form) is a photonics technology, the use of advanced intelligent equipment line
analyzer, it applies to power plants, petrochemical, pharmaceutical, semiconductor and other industries trace boiler feed water
and steam in the United Determination of ammonia. Advanced technology, unique design, minimal maintenance, allowing users
to enjoy a new work ethic.
Principle instrument
Under acidic conditions, hydrazine and dimethylamino benzaldehyde to form a yellow complex with, and then determined by
spectrophotometry.
Institutional instruments
Equipment from the circuit systems, chemical reagent flow path and box three unit structure.
Circuit system: including single-chip computer systems, LCD monitors, control circuits and so on.
Chemical Flow: including diaphragm pumps, control valves, filters, photometric detector and so on.
Reagent box: for placing reagent bottles.
Main Specifications
Measuring range: 0 to 100 μg / L
Accuracy: 1% (full scale)
Measurement reproducibility: 1% (full scale)
Sample conditions: temperature of 5 ~ 40 ℃, the sample pressure of 0.1 Mpa, flow 50 ml / min
Measurement time: 6min
Reagent consumption: 3.0 liters / month
Power Supply: AC220V 50Hz Power 150 W
Signal output: 4 ~ 20 mA isolated RS232C or RS485 serial port (optional)
Dimensions (mm): 700 (high) × 500 (W) × 310 (D)
Hole Size (mm): 670 (high) × 470 (W)
Weight: 30Kg
Specifications:
Size / material:
Range:
Size: 594 × 395 × 223 mm
Sodium Range:
Resolution:
Weight: 8Kg
0 ~ 99.9ppb
0.01ppb
Shell: Polyester ABS synthetic material
0 ~ 999ppb
1ppb
Environmental conditions: 0 ~ 99.9ppm
0.01ppm
Ambient temperature: 5 ~ 55 ℃
ppb to ppm range switching automatically
Water temperature: 5 ~ 45 ℃
Accuracy: ± 0.1ppb or 2.5%
Relative Humidity: 0 ~ 90% non-condensing
Repeatability: 2%
Display: LCD display with multi-parameter display (mv, temperature, time)
Adjust the PH value of water sample kit: ammonia diisopropyl
Automatic temperature compensation
Reagent consumption: 1 L / 40 ~ 50 days
Water pipes: φ6mm (diameter) × φ8mm (OD)
Calibration: standard solution directly into
Signal output:
Temperature measurement:
Current isolated output: 4 ~ 20mA
Solution temperature range: 5 ~ 55 ℃
Maximum load: 500 Ω
Temperature Sensor Resolution: 0.1 ℃
0 ~ 100 ℃ temperature display
Sample flow Way:
Digital Interface:
Pressure: 0.3 ~ 3bar
RS485
Traffic: more than 120mL/min
Removable moisture meter HMT180M compact design for easy system integration, the advantages of having a stable and reliable
measurement for some principles CEMS system
Removable moisture meter HMT180M features:
1. Compact design, easy system integration;
2. Stable and reliable measurement;
3. For some principles CEMS system;
Removable moisture meter HMT180M technical parameters:
1. Measuring range: 0-40Vol%
2. Response time (90%): 15s
3. How it works: RC method
4. The humidity output signal: 1 * 4-20mA
5. No temperature output signal
6. The power consumption (maximum): 25W
7. The measuring point temperature: ≤180 ℃
8. Operating humidity: 0-100% RH
9. Supply voltage: 24VDC
10. Size: 105W * 150H * 62Dmm
11. Installation: Mount Backplane