Professional Documents
Culture Documents
HTH 620
HTH 620
Harvester
Parts
Manual
F350811
ENG
Parts Manual
HTH620 Harvester
Contents.
How To Use
Introduction __________________________________________________________________ 1-3
Parts / Options ________________________________________________________________ 1-3
Ordering A Part _______________________________________________________________ 1-3
Part Identification _____________________________________________________________ 1-4
Mechanical
Hanging Bracket ______________________________________________________________ 2 - 2
Delimb Arms Top _____________________________________________________________ 2 - 4
Delimb Arms Bottom __________________________________________________________ 2 - 6
Main Body & Front Knife - No Topping Saw _______________________________________ 2 - 8
Main Body & Front Knife - Topping Saw _________________________________________ 2 - 10
Guards & Covers_____________________________________________________________ 2 - 12
Small Wheel Drive Arms ______________________________________________________ 2 - 14
Small Wheel Drive Motors _____________________________________________________ 2 - 16
Standard & Synchronized Fixed Drive Motors______________________________________ 2 - 18
Large Wheel Drive Arms & Motors ______________________________________________ 2 - 20
Cylinders
Delimb Cylinder ______________________________________________________________ 3 - 2
Harvester Cylinder ____________________________________________________________ 3 - 4
Drive Cylinder________________________________________________________________ 3 - 6
Rotator
Rotator______________________________________________________________________ 4 - 2
Link ________________________________________________________________________ 4 - 4
Swivel - JIC __________________________________________________________________ 4 - 6
Chain Saw
3/4" Saw Mounting A2FM-45____________________________________________________ 5 - 2
3/4" Chain Saw A2FM-45_______________________________________________________ 5 - 4
Main Saw Cylinder ____________________________________________________________ 5 - 6
Main Saw Oiler & Strainer ______________________________________________________ 5 - 8
Topping Saw ________________________________________________________________ 5 - 10
Topping Saw Cylinder ________________________________________________________ 5 - 12
Topping Saw Sprocket Kit _____________________________________________________ 5 - 14
Supercut Saw Mounting _______________________________________________________ 5 - 16
Supercut Saw Assembly _______________________________________________________ 5 - 18
Electrical
Electrical System ______________________________________________________________ 6 - 2
Cab Box _____________________________________________________________________ 6 - 4
Screen & Printer _______________________________________________________________ 6 - 6
Key Switch Box _______________________________________________________________ 6 - 8
Oil Box _____________________________________________________________________ 6 - 10
Head Module Box ____________________________________________________________ 6 - 12
Control Handle - Left Hand _____________________________________________________ 6 - 14
Control Handle - Right Hand ____________________________________________________ 6 - 16
Control Handle - Left Hand 6 Button______________________________________________ 6 - 18
Control Handle - Right Hand 6 Button ____________________________________________ 6 - 20
Control Handle - Left Hand 8 Button______________________________________________ 6 - 22
Control Handle - Right Hand 8 Button ____________________________________________ 6 - 24
Measuring
Measuring System _____________________________________________________________ 7 - 2
Measuring - Length ____________________________________________________________ 7 - 4
Measuring Cylinder ____________________________________________________________ 7 - 6
Accumulator __________________________________________________________________ 7 - 8
Measuring - Diameter__________________________________________________________ 7 - 10
Find End ____________________________________________________________________ 7 - 12
Hydraulics
Valve - Small Wheel Drive Motors, 3/4" or Supercut Saw ______________________________ 8 - 2
Valve - Small Wheel Drive Motors, 3/4" or Supercut Saw, Bottom Delimb_________________ 8 - 4
Valve - Large Wheel Drive Motors, 3/4" or Supercut Saw ______________________________ 8 - 6
Valve - Large Wheel Drive Motors, 3/4" or Supercut Saw, Bottom Delimb_________________ 8 - 8
Fittings - Valve_______________________________________________________________ 8 - 10
Fittings - Measuring/Saw Return Block____________________________________________ 8 - 12
Fittings - Cylinders ____________________________________________________________ 8 - 14
Fittings - Small Wheel Drive Motors Half Synchro___________________________________ 8 - 16
Fittings - Small Wheel Drive Motors Full Synchro ___________________________________ 8 - 18
Fittings - Large Wheel Drive Motors Full Synchro ___________________________________ 8 - 20
Fittings - 3/4" Saw A2FM-45 & Supercut Saw ______________________________________ 8 - 22
Fittings - Topping Saw _________________________________________________________ 8 - 24
Fittings - Accumulator/Drain Block_______________________________________________ 8 - 26
Swivel Hoses & Fittings________________________________________________________ 8 - 28
Hose Schematic - Small Wheel Drive Motors Half Synchro & 3/4" Saw __________________ 8 - 30
Hose Schematic - Small Wheel Drive Motors Half Synchro & Supercut Saw ______________ 8 - 32
Hose Schematic - Small Wheel Drive Motors Full Synchro & 3/4" Saw __________________ 8 - 34
Hose Schematic - Small Wheel Drive Motors Full Synchro & Supercut Saw ______________ 8 - 36
Hose Schematic - Large Wheel Drive Motors Full Synchro & 3/4" Saw __________________ 8 - 38
Hose Schematic - Large Wheel Drive Motors Full Synchro & Supercut Saw ______________ 8 - 40
Hose Example________________________________________________________________ 8 - 42
Tools
Tool Kit _____________________________________________________________________ 9 - 2
Consumable Items
Fastenings 19H1410 - WA100040 ________________________________________ Appendix 1 - 2
Fastenings WA100044 - WA100884 ______________________________________ Appendix 1 - 4
Fastenings WA100896 - WA101719 ______________________________________ Appendix 1 - 6
Fastenings WA101747 - WA102380 ______________________________________ Appendix 1 - 8
Fastenings WA102386 - WA103060 _____________________________________ Appendix 1 - 10
Fastenings WA103065 - WA103714 _____________________________________ Appendix 1 - 12
Fastenings WA103715 - WA103747 _____________________________________ Appendix 1 - 14
Manual Replacement
When re-ordering this manual, quote the part number F350811 and harvester serial number.
The contents of this manual are subject to change without notice. Due to updates, there may be
differences between information in this manual and the products described.
While every effort has been made to ensure the accuracy of the information in this manual, Waratah NZ
Limited accepts no responsibility for any errors or consequences.
SECTION 1
How to use
1-1
1-2
Introduction
This section details all the parts available for the replacement of worn or serviceable items on the
machine. The following information will assist you in understanding the layout and detail of this section.
Take time to read and understand the content, it will save you time later when you least have it.
Parts / Options
This parts manual contains all machine variations that can be installed on this model. Check a ‘machine
ordering form’ for variations as supplied ex factory.
Ordering A Part
Each order for replacement parts should give the following information:
• Part number
• Description
• Quantity
• Method of shipment
1-3
Part Identification
Each component part has an illustration ( left hand page ) and a parts list ( right hand page ). Each
illustration details all the individual parts that make up the main components, and each has a number that
corresponds with the item number in the parts list.
Part Number. This number is the designated number allocated by Waratah General Engineering Ltd
and must always be used when ordering parts.
Qty. This is the quantity of the parts used within the particular component.
Description. The description details the item. Items that form a kit have their description indented
below that of the kit description.
1-4
WARNING
Always use GENUINE WARATAH SPARE
DEATH.
1-5
Notes
1-6
SECTION 2
Mechanical
2-1
Hanging Bracket
2-2
Hanging Bracket
2-3
Delimb Arms Top
2-4
Delimb Arms Top
2-5
Delimb Arms Bottom
2-6
Delimb Arms Bottom
2-7
Main Body & Front Knife - No Topping Saw
2-8
Main Body & Front Knife - No Topping Saw
2-9
Main Body & Front Knife - Topping Saw
2 - 10
Main Body & Front Knife - Topping Saw
2 - 11
Guards & Covers
2 - 12
Guards & Covers
2 - 13
Small Wheel Drive Arms
2 - 14
Small Wheel Drive Arms
9 F350086 1 LINK
10 F351031 2 LUBRICATION FITTING
11 F350482 2 BUSHING
14 WA100438 1 BOLT
15 WA100931 2 BOLT
16 WA102499 8 BOLT
17 WA101957 2 BOLT
18 WA102712 1 BOLT
19 F351023 5 NUT
20 WA102555 8 WASHER
21 WA102580 2 WASHER
23 F350425 2 WASHER
24 F350429 4 WASHER
25 WA101968 1 PIN
26 F350446 1 PIN
27 WA105050 2 PIN
28 WA100992 2 PIN
30 WA102430 % WASHER, 4.0
30 WA102966 % WASHER, 4.5
30 WA103146 % WASHER, 5.0
30 WA103948 % WASHER, 5.5
30 WA104010 % WASHER, 6.0
31 WA101045 2 LOCK WASHER, SPLIT
32 WA103350 2 LOCKING COLLAR
33 19H3656 2 BOLT
2 - 15
Small Wheel Drive Motors
2 - 16
Small Wheel Drive Motors
5 F350063 2 COVER
6 F350067 4 % SHIM, 0.005"
6 F350068 2 % SHIM, 0.010"
6 F350069 2 % SHIM, 0.020"
7 F350099 2 $ FEED WHEEL, SPIKE
7 F350100 2 $ FEED WHEEL, THUMBNAIL
7 F350101 2 $ FEED WHEEL, COLEMAN BARS
7 WA100401 2 $ FEED WHEEL, NON-AGGRESSIVE
7 WA101748 2 $ FEED WHEEL, DEBARKER
7 F350102 2 $ FEED WHEEL, RUBBER
8 19H3011 16 BOLT
9 WA101716 12 BOLT
10 WA100733 8 BOLT
11 WA102768 16 NUT
12 WA102398 12 WASHER
13 WA100044 32 WASHER
14 F351031 2 LUBRICATION FITTING
15 WA100660 2 ROLLER BEARING
16 WA101848 2 SEALING WASHER
17 F350667 2 HYDRAULIC MOTOR
17 WA101961 2 HYDRAULIC MOTOR
18 F351078 2 PIPE PLUG
19 F350607 2 SEAL
2 - 17
Standard & Synchronized Fixed Drive Motors
2 - 18
Standard & Synchronized Fixed Drive Motors
2 - 19
Large Wheel Drive Arms & Motors
2 - 20
Large Wheel Drive Arms & Motors
2 - 21
Notes
2 - 22
SECTION 3
Cylinders
3-1
Delimb Cylinder
3-2
Delimb Cylinder
3-3
Harvester Cylinder
3-4
Harvester Cylinder
3-5
Drive Cylinder
3-6
Drive Cylinder
3-7
Notes
3-8
SECTION 4
Rotator
4-1
Rotator
4-2
Rotator
4-3
Link
4-4
Link
4-5
Swivel JIC
4-6
Swivel JIC
4-7
Notes
4-8
SECTION 5
Chain Saw
5-1
¾" Saw Mounting A2FM-45
5-2
¾" Saw Mounting A2FM-45
5-3
¾" Chain Saw A2FM-45
5-4
¾" Chain Saw A2FM-45
F350244 1 NUT
15 F350321 1 NUT
20 F351007 1 SET SCREW
24 WA101844 1 NUT
28 WA102580 1 WASHER
5-5
Main Saw Cylinder
5-6
Main Saw Cylinder
5-7
Main Saw Oiler & Strainer
5-8
Main Saw Oiler & Strainer
5-9
Topping Saw
5 - 10
Topping Saw
5 - 11
Topping Saw Cylinder
5 - 12
Topping Saw Cylinder
5 - 13
Topping Saw Sprocket Kit
5 - 14
Topping Saw Sprocket Kit
5 - 15
Supercut Saw Mounting
5 - 16
Supercut Saw Mounting
5 - 17
Supercut Assembly
5 - 18
Supercut Assembly
5 - 19
Supercut Assembly
5 - 20
Supercut Assembly
5 - 21
Notes
5 - 22
SECTION 6
Electrical
6-1
Electrical System
5
3
4
2
7 6
9
8 13
11 12
10
20 19 18 17 16
6-2
Electrical System
6-3
Cab Box
2
21
8 4
13
3
23
5
14
15
6-4
Cab Box
6-5
Screen & Printer
11
9
6-6
Screen & Printer
6-7
Key Switch Box
3 4
6-8
Key Switch Box
6-9
Oil Box
10
12
4 6
2 3
6 - 10
Oil Box
6 - 11
Head Module Box
14
15
18
8 16
6 - 12
Head Module Box
6 - 13
Control Handle - Left Hand
6 - 14
Control Handle - Left Hand
6 - 15
Control Handle - Right Hand
6 - 16
Control Handle - Right Hand
6 - 17
Control Handle - Left Hand 6 Button
6 - 18
Control Handle - Left Hand 6 Button
6 - 19
Control Handle - Right Hand 6 Button
17
6 - 20
Control Handle - Right Hand 6 Button
6 - 21
Control Handle - Left Hand 8 Button
6 - 22
Control Handle - Left Hand 8 Button
6 - 23
Control Handle - Right Hand 8 Button
17
6 - 24
Control Handle - Right Hand 8 Button
6 - 25
Notes
6 - 26
SECTION 6
Electrical
6-1
Electrical System
2
3
5
14
17
13
15
12
19
20
21
22
23
6-2
Electrical System
6-3
Cab Box
28
23
22
21
20 11
40
19 41 9
13 44
5 12
2
7
24
6
46 14 8
25
26
6-4
Cab Box
6-5
Screen & Printer
19
2 3 4
17
26
1
18
5 6 7
26 27
10
11
20
12
21
13
22
14
23
25 15
24
16
6-6
Screen & Printer
6-7
Key Switch Box
7 6
6-8
Key Switch Box
6-9
Oil Box
13
10 11 12
2 3
6 - 10
Oil Box
6 - 11
Head Module Box
13
15
44
6 - 12
Head Module Box
6 - 13
Control Handle - Left Hand
6 - 14
Control Handle - Left Hand
6 - 15
Control Handle - Right Hand
28
6 - 16
Control Handle - Right Hand
6 - 17
Control Handle - Left Hand 6 Button
6 - 18
Control Handle - Left Hand 6 Button
6 - 19
Control Handle - Right Hand 6 Button
6 - 20
Control Handle - Right Hand 6 Button
6 - 21
Control Handle - Left Hand 8 Button
6 - 22
Control Handle - Left Hand 8 Button
6 - 23
Control Handle - Right Hand 8 Button
6 - 24
Control Handle - Right Hand 8 Button
6 - 25
Notes
6 - 26
SECTION 7
Measuring
7-1
Measuring System
7-2
Measuring System
7-3
Measuring - Length
7-4
Measuring - Length
7-5
Measuring Cylinder
7-6
Measuring Cylinder
7-7
Accumulator
7-8
Accumulator
7-9
Measuring - Diameter
7 - 10
Measuring - Diameter
7 - 11
Find End
7 - 12
Find End
7 - 13
Notes
7 - 14
SECTION 8
Hydraulics
8-1
Valve - Small Wheel Drive Motors, 3/4" or Supercut Saw
8-2
Valve - Small Wheel Drive Motors, 3/4" or Supercut Saw
8-3
Valve - Small Wheel Drive Motors, 3/4" or Supercut Saw, Bottom Delimb
8-4
Valve - Small Wheel Drive Motors, 3/4" or Supercut Saw, Bottom Delimb
8-5
Valve - Large Wheel Drive Motors, 3/4" or Supercut Saw
8-6
Valve - Large Wheel Drive Motors, 3/4" or Supercut Saw
8-7
Valve - Large Wheel Drive Motors, 3/4" or Supercut Saw, Bottom Delimb
8-8
Valve - Large Wheel Drive Motors, 3/4" or Supercut Saw, Bottom Delimb
8-9
Fittings - Valve
8 - 10
Fittings - Valve
8 - 11
Fittings - Measuring/Saw Return Block
8 - 12
Fittings - Measuring/Saw Return Block
8 - 13
Fittings - Cylinders
8 - 14
Fittings - Cylinders
8 - 15
Fittings - Small Wheel Drive Motors Half Synchro
8 - 16
Fittings - Small Wheel Drive Motors Half Synchro
8 - 17
Fittings - Small Wheel Drive Motors Full Synchro
8 - 18
Fittings - Small Wheel Drive Motors Full Synchro
8 - 19
Fittings - Large Wheel Drive Motors Full Synchro
8 - 20
Fittings - Large Wheel Drive Motors Full Synchro
8 - 21
Fittings - 3/4" Saw A2FM-45 & Supercut Saw
8 - 22
Fittings - 3/4" Saw A2FM-45 & Supercut Saw
8 - 23
Fittings - Topping Saw
8 - 24
Fittings - Topping Saw
4 WA101051 1 SUPPORT
5 WA101204 1 % WASHER
6 WA103072 2 BOLT
7 WA100044 2 WASHER
8 WA102986 3 BOLT
9 WA101135 1 FITTING
10 WA103290 1 THREADED NIPPLE
11 WA100509 2 THREADED NIPPLE
12 WA102610 2 ELBOW FITTING
13 WA101361 2 THREADED NIPPLE
14 WA101835 1 THREADED NIPPLE
15 F351049 1 ELBOW FITTING
16 WA100477 2 ELBOW FITTING
17 F351068 1 HYDRAULIC RESTRICTOR
18 WA101140 3 SEALING WASHER
19 WA103517 1 SEALING WASHER
20 WA101547 2 SEALING WASHER
21 WA102850 2 SEALING WASHER
8 - 25
Fittings - Accumulator/Drain Block
8-26
Fittings - Accumulator/Drain Block
8-27
Swivel Hoses & Fittings
8 - 28
Swivel Hoses & Fittings
G WA102990 1 HOSE 3/4" - 1 1/16" JIC STR.F. / 4 WIRE x 0480 / 3/4" JIC STR.F.
8 - 29
Hose Schematic - Small Wheel Drive Motors Half Synchro & 3/4" Saw
8 - 30
Hose Schematic - Small Wheel Drive Motors Half Synchro & 3/4" Saw
8 - 31
Hose Schematic - Small Wheel Drive Motors Half Synchro & Supercut Saw
8 - 32
Hose Schematic - Small Wheel Drive Motors Half Synchro & Supercut Saw
8 - 33
Hose Schematic - Small Wheel Drive Motors Full Synchro & 3/4" Saw
8 - 34
Hose Schematic - Small Wheel Drive Motors Full Synchro & 3/4" Saw
8 - 35
Hose Schematic - Small Wheel Drive Motors Full Synchro & Supercut Saw
8 - 36
Hose Schematic - Small Wheel Drive Motors Full Synchro & Supercut Saw
8 - 37
Hose Schematic - Large Wheel Drive Motors Full Synchro & 3/4" Saw
8 - 38
Hose Schematic - Large Wheel Drive Motors Full Synchro & 3/4" Saw
8 - 39
Hose Schematic - Large Wheel Drive Motors Full Synchro & Supercut Saw
8 - 40
Hose Schematic - Large Wheel Drive Motors Full Synchro & Supercut Saw
8 - 41
Hose Example
8 - 42
SECTION 9
Tools
9-1
Tool Kit
9-2
Tool Kit
9-3
Notes
9-4
APPENDIX 1
Consumable Items
Appendix 1 - 1
Fastenings 19H1410 - WA100040
Appendix 1 - 2
Fastenings 19H1410 - WA100040
Appendix 1 - 3
Fastenings WA100044 - WA100884
Appendix 1 - 4
Fastenings WA100044 - WA100884
Appendix 1 - 5
Fastenings WA100896 - WA101719
Appendix 1 - 6
Fastenings WA100896 - WA101719
Appendix 1 - 7
Fastenings WA101747 - WA102380
Appendix 1 - 8
Fastenings WA101747 - WA102380
Appendix 1 - 9
Fastenings WA102386 - WA103060
Appendix 1 - 10
Fastenings WA102386 - WA103060
Appendix 1 - 11
Fastenings WA103065 - WA103714
Appendix 1 - 12
Fastenings WA103065 - WA103714
Appendix 1 - 13
Fastenings WA103715 - WA103747
Appendix 1 - 14