THINK ABOUT IT "The future belongs to those who belicve in the beauty of their dreams." -Eleanor Roosevelt
1. Full form of MATLAB:
(a) Matrix Laboratory (b) Maths Laboratory 8. Melting point of Nichrome wire: (c) Matrix Library (a) 540°C (b) 450°C (d) Maths Library (c) 360°C (d) 630°C 2. GUI based companion software for 9. Induced emf will be maximum in which case: MATLAB: (a) ETAP (b) Simulink (a) 2Ampere, de (c) PSPICE (b) 50 Ampere, dc (d) Multisim (c) 2Ampere, 50 Hz ac 3. MATLABwas launched by (d) 2Ampere, 100 Hz ac (a) Simulink (b) Intel 10. Speed of light in vacuum: (c) Mathworks Inc. (a) 3x 10' cm/s (b) 3x 10 cm/s (d) Wipro (c) 3x 10 cm/s (d) 3x 10°cm/s 4. Softwares used in Electrical Engineering: 11. Step up transformer steps up: (a) MATLAB (b) PSPICE (c) Multisim (a) Current (b) Voltage (d) Allof these (c) Power (d) Frequency 5. MATLAB was launched in: 12. Step down transformer steps up: (a) 1983 (b) 1993 (a) Current (b) Voltage (c) 2003 (d) 2013 (c) Power (d) Frequency 6. Energy stored in a 0.001 uF capacitor, 13. Frequency can be down converted using: connected to 20 V dc: (a) Step up transformer (a) 0.02 u Joule (b) 0.2 u Joule (c) 2u Joule (b) Step down transformer (d) 20 u Joule (c) Cyclo converter 7. In star connection: (d) Alternator (a) V,= VA 182 Multiple Choice Questions 183 noise intransformer is called: (a) 110 V,50 Hz ac 14. The (b) Hissing (b) 110 V, 25 Hz ac (a) Humming (C) Shirking (d) Flowing (c) 110 V, 100 Hz ac Transformer is rated in: (d) 110 V, dc 15. (b) Joule (a) kw 23. In the given circuit, the transformation ratio (c) kVA (d) kv of the transformer:
frequency is increased, which
V,= 200 V, V,= 150 V, I, =50 A Ifthe supply 16. losses will increase: (a) Copper (b) Hysteresis (c) Eddy current (d) All of these V 17. Number of coils in Autotransformer: (a) 1 (b) 2 RL3 V2 (c) 3 (d) 4 18. Yoke in DC machines is made of: Transformation ratio of transformer (a) Non-magnetic materials (a) 2/3 (b) 3/4 (b) Magnetic materials (c) 4/5 (d) 5/6 (c) Semiconductors (d) NOTA 24. In question 23, value of I, : 75 200 19. Commutator brushes are made of: (a) 2 -Amp (b) 3 -Amp (a) Copper (b) Aluminium (c) 100 Amp (d) 125 Amp (c) Steel (d) Carbon 25. In question 23,value of 4: 20. Generator suitable for parallel operation: (a)2s 50 (a) Shunt generator 2 Amp (b) 3 Amp (b) Series generator 175 75 (c) Compound generator (c) 2 -Amp ()Amp (d) All of these 26. In a four pole dc machine: Z1. Coil appropriate for high current generation: (a) All the four poles are north poles (a) Lap (b) Alternate poles are north and south (b) Progressive wave (c) Allthe four poles are south poles (c) Lap and wave (d) Two north poles follow two south poles (d) All of these 27. Brushes in a de machine are made of: 22. Voltage V, will be (a) Carbon (b) Soft copper 2:1 (c) Hard copper (d) All of above 220 V, 50 Hz 00000 28. The insulating material between commutator ac V2 segments is generally: (a) Graphite (b) Paper (c) Mica (d) Insulating varnish 184 Applications of Computer Software in Electrical Engineering 29. The magnetic reversal frequency for aP pole, 30. Winding used in welding generator: Nrpm dc generator: (a) Lap-winding (a) Np (b) Npo (b) Wave winding 2 60h o (c) Delta winding Np Np (d) Duplex wave winding (c) (d) 120 3000