Professional Documents
Culture Documents
20240308ThinkPower Configuration Tool
20240308ThinkPower Configuration Tool
20240308ThinkPower Configuration Tool
1.Primary Functions
1
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
Parameter configuration area for serial/rs232 port, which is used for connecting the device
and computer. This is the key step which define a successful use for the rest. Before using
this option, please confirm that the device and computer are successfully connected
through the USB interface. Then press Open com. The LED before the device type will
change from to .which indicates the connection is successful. Button used for
query all of the parameter. (parameters in default or newly set parameters)
Parameter configuration area for device unit, which is used for configuring needed value
Software version and protocol area, which showcase the current basic information of the
device.
User Manual
3.1 Serial port configuration: when you switch the COM port, please reconnect the device and read the parameters
3.2 Firmware upgrade: progress bar indicating. Please pay attention to the bar until it fully reaches 100%
3.3 Parameter Control: Hover your mouse cursor over the blue icon - it gives you instant hint help
2
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
3.4 Parameter Control: when you start to fill the value , the color of the character will change to red.
3.4 Parameter Control: Select the network route that you want to register first. This is a special option only when you need.
You can choose or shed any of below network at your request.
A. Quick start guide: After each device leaves the factory, all parameters have a default setting. When you get the
sample and want to use it quickly. Please confirm that at least the following three necessary conditions have been
modified or set up successfully in a way that suits your needs: IP address, port, APN of the SIM. You can find these
three parameters via “Server setting”&”APN setting”.
3
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
B. Device Information
Model & SN(IMEI) are read-only elements, and can not be modified.
4
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
Name Configure Property Comments
Active-ON reportoninterval rw
Report interval in active state
Active-OFF reportoffinterval rw
Report interval in inactive state
Stationary- stationaryackti rw
ACK me The device determines the time
from moving state to stationary
state
D. APN setting(LTE/GSM:APN)
5
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
APN Password apnpassword rw Password for APN
E. server setting
6
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
F. FTP server setting
H. Bluetooth peripheral
BTSN2 btsn2 rw
BTSN3 btsn3 rw
BTSN4 btsn4 rw
BTSN5 btsn5 rw
BTSN6 btsn6 rw
BTSN7 btsn7 rw
BTSN8 btsn8 rw
8
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
I. Selective function for device unit
TIPS: Please note vibra (g sensor) this option. If this option is selected, the upload interval will be based on
the time set by “Active-on and Active-Off” in the “report interval setting”. If this item is not selected, that is to say,
when G-SENSOR is turned off, the data upload interval will only be uploaded according to the interval set by “ACTIVE-
OFF” in the “report interval setting”.
9
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
J. Selective emergency events for SMS/Dial alert
Volt.d emerg.ctrl.bit[3] rw
Voltage alarm events sending control bit
via dialing
10
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
TIPS: STATE is an SMS command. State query means when you text the STATE command through text functions.
You will get the ticked parameter in the above picture in return.
11
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
L. Polish CAN function(For TE604E use only)
5.3 Select the file, click Start, and wait for the upgrade to succeed
12
深圳市思创捷物联科技有限公司
Shenzhen ThinkPower Technology Co.,Ltd
地址:深圳市宝安区新安街道稻兴环球科创中心 B 座 1215 号 电话:0755-86719689
6.2 The pop-up window prompts whether to restore the factory settings, click Yes to restore the factory default
parameters, and click No to exit the step
13