Professional Documents
Culture Documents
NGP Presentation - 2023
NGP Presentation - 2023
03.
ABOUT COMPANY
Workshop for preparation and Health & Safety and Environmental Test site Field work and defect verifications
production of equipment Protection Department Testing of new inspection tools, verification Certified personnel for performing work in the
Highly qualified specialists, quality control of All business and technological processes in the and inspection before the projects most difficult conditions, high-precision
components and assembly company are organised in strict compliance with inspection equipment
internal Quality, Health, Safety and Environment
policies
04.
SERVICES
05.
SERVICES
In-line gauging pig
Dimensions:
SК series
114 mm (4”) – 1420 mm (56”)
Medium:
gas, liquid, multiphase
Gauging is the primary and important aspect of the cleaning and
preparation of pipelines for inspection Operating temperature:
-10°C to +80°C
The gauging pig has the best reduced bore passing capability and
is equipped with a metal gauging disc for evaluating the internal
Operating pressure:
pipeline bore
without limits
06.
SERVICES
In-line multi-channel caliper
Dimensions:
PM series
114 mm (4”) – 1420 mm (56”)
Medium:
gas, liquid, multiphase
When the geometry of the pipe wall changes the deflection of
sensors translates into electrical signals. The multi-channel
Operating temperature:
independent measuring system spreads evenly over the entire
circumference and has direct contact with the inner wall of the -10°C to +80°C
pipeline
Operating pressure:
The tool is equipped with a mapping module for generation of 0,5 MPa to 12,0 MPa
pipeline profile, measurement of bend radius and angle
Movement speed:
The tool makes it possible to detect dents, buckles, ovality and 0.2 m/s to 4.0 m/s
bore reductions and evaluate their size and location on the
pipeline Minimum pipeline bend radius:
1,5D x 90°
07.
SERVICES
In-line cleaning pig
Dimensions:
SO series
114 mm (4”) – 1420 mm (56”)
Medium:
gas, liquid, multiphase
Safe and efficient transportation of gas and oil through pipeline
systems requires keeping the pipelines interior in clean Operating temperature:
condition
-10°C to +80°C
The presence of deposits, dust, construction debris on the inner Operating pressure:
surface can have a significant impact not only on its
performance, but also on the quality of the data obtained during without limits
in-line inspection
Minimum pipeline bend radius:
Cleaning pigs are available in different configurations: standard 1,5D x 90°
disc, with brushes (for more aggressive cleaning of the walls
from deposits, scale, including that from the corrosion pits) or Minimum bore in straight pipe:
with permanent magnets (for collecting metal objects and scale) 85% OD
Tracking device
08.
SERVICES
Axial magnetization in-line inspection tool (MFL)
Dimensions:
MDM series
114 mm (4”) – 1420 mm (56”)
Wall thickness:
09.
SERVICES
Transverse magnetization in-line inspection tool (TFI)
Dimensions:
MDT series
159 mm (6”) – 1420 mm (56”)
Wall thickness:
10.
SERVICES
Ultrasonic testing wall measurement in-line inspection tool (UTWM)
Dimensions:
WM series
219 mm (8”) – 820 mm (32”)
Wall thickness:
11.
SERVICES
Tracking equipment
Included in the in-line tool and is designed to indicate The recorder is installed at the control (marker) points Serves for monitoring the passage of an in-line tool,
its location in the pipeline by means of an emitted low- of the pipeline route to record the time of passage of searching for and locating it by low-frequency
frequency signal the in-line tool by low-frequency transmitter and/or transmitter and/or magnetic field of the magnetic
magnetic field of the magnetic system to receive the system
exact time and determine the coordinates of the
marker point
12.
SERVICES
XYZ mapping/GPS positioning
XYZ mapping survey can be carried out both at the stage of caliper
inspection and during MFL survey
13.
SERVICES
Data processing software
14.
SERVICES
Technical report and integrity assessment
15.
SERVICES
Defect verifications
16.
SPECIALIST EQUIPMENT
Caliper tools with eddy current sensors
17.
SPECIALIST EQUIPMENT
Dual diameter inspection tools
Our company performed in-line inspection with 16/20" and 8/10" dual
diameter tools (multichannel caliper and MFL-A tools) for a customer in
Russia
The inspection tools successfully ran the entire pipeline distance, data were
obtained for all segments and recorded in full.
18.
SPECIALIST EQUIPMENT
Experience in high temperatures
Our company carried out in-line inspection using 12" magnetic inspection
tools (MFL-A) for a customer in Italy.
The site and equipment to be used on the project was analysed prior to the
work.
The inspection tool withstood the high temperatures, data were obtained
for all segments and recorded in full
19.
SPECIALIST EQUIPMENT
Experience in passing Y - shaped tees
To assess the passage of the Y-piece, a section containing this structural element with in-line equipment
inside was simulated. The simulated passage proved that the inspection tools shall safely inspect these
sections without damaging the pipelines
A test rig with the Y-piece simulation was made at NGP LLC facility and pull-through tests were performed
with the equipment set
The customer was provided with an assessment of the passage of complex sections by inspection tools and
a decision on the passage of the tools was made jointly.
And our company did an excellent job!
The inspection tools successfully ran through complex structural elements of pipelines, data were obtained
for all segments and recorded in full.
20.
ILI PROCESS
Pipeline internal bore
cleaning
Benchmarking the route,
taking coordinates of High resolution MFL, TFI or
reference points UT inspection
21.
PERMITS
NGP is certified to ISO 9001, ISO 14001 and
OHSAS 18001
All of the company tools are ATEX certified in
compliance with EU safety requirements
NGP reports and specifications are in line with
POF 2016
22.
PERMITS
23.
WORK EXPERIENCE
24.
FURTHER DEVELOPMENT
25.
WHY US?
1. 2. 3.
Careful attention to all customer High organizational mobility and Wide range of technical
requirements efficiency in making decisions solutions
4. 5. 6.
Possibility of equipment Flexibility in terms of field work Flexibility in the terms of
adaptation for non-standard performance reporting
pipelines
26.
THANK YOU FOR YOUR ATTENTION!
Any questions?