Professional Documents
Culture Documents
M150 - Installation Confirmation
M150 - Installation Confirmation
rooms; laser.
⑧ There should be no
open flame at the
equipment placement
point, and the equipment
placement room shall be
affixed with a no open
flame label;
⑨ Must be equipped with
a regulated power supply
of 5KW
2 Water ①The coolant is not 15L deionized water or Tap water and
chiller allowed to contain any distilled water mineral water are
preservatives or other strictly prohibited
additives;
②Prepare deionized water
or distilled water in
advance
3 Compressed ①Air compressor: power ①Ensure the
air up to 7.5Kw, gas output up normal operation
to 1.1m³/min, starting air of the nitrogen
pressure ≥0.7MPa; generator;
②Gas storage tank: gas ②Operation of
storage capacity ≥600L, supply equipment
compressive capacity host;
≥0.8MPa; ③Use for
③Cold dryer: purification post-processing
and drying capacity up to (sandblasting
2m³/min, working pressure machine, etc.);
up to 0.8MPa, at least two ④ If the main air
stages of precision supply pipeline is a
filtration, and filtration PU pipe, the pipe
levels up to 1μm and diameter should
0.01μm. be larger than
φ12.
4 Inert gas ①The pressure of ① Nitrogen purity: Two reducing
nitrogen input equipment ≥99.95%, the valves
is recommended to reach recommended nitrogen
0.7MPa; purity is 99.999%;
②The pressure of the ② Argon gas needs to be
argon input equipment is equipped with a pressure
not less than 0.25MPa. reducing valve.
The minimum size of the site layout, the site space must be larger than
M2150
place Precautions
Prepare 15L deionized or distilled
Cooling
4 water according to the Precautions Yes No
water
for Metal 3D printer installation
Prepare air source according to
*Compresse
5 the Precautions for Metal 3D Yes No
d air
printer installation
Prepare inert gas according to the
6 *Inert gas Precautions for Metal 3D printer Yes No
installation
Prepare power supply according to
*Power
7 the Precautions for Metal 3D Yes No
supply
printer installation
*Computer Prepare the computer according
8 configuratio to the Precautions for Metal 3D Yes No
n printer installation
Please complete this form and send this page back to Chamlion (photo or PDF)
Signature:
Date: