Professional Documents
Culture Documents
Spesifikasi 730 Santika 2018
Spesifikasi 730 Santika 2018
Kegiatan pelaksanaan yang dimaksud dalam perjanjian pekerjaan ini adalah Jasa Penyewaan dan
Pengoperasian 1 (Satu) Unit Utama dan 1 (Satu) Unit Cadangan Pompa Injeksi lengkap dengan
Prime Mover serta Aksesoris Selama 730 Hari di wilayah kerja PERUSAHAAN.
2.1 Kontraktor Menyediakan Peralatan dengan spesifikasi dan persyaratan sebagai
berikut:SPESIFIKASI TEKNIS DAN PERSYARATAN OBJEK PERJANJIAN
1) Spesifikasi dan Persyaratan Pompa Injeksi Utama:
a. Rate : 6.000 – 8.000 BWPD (4 – 6 BPM)
b. Power Capacity : 150 – 165 HP / 112 – 123 kW
c. Speed : 100 – 500 rpm
d. Pressure : 800 – 1500 psi
e. Plunger Diameter : 1.25” – 4”
f. Stroke Length : 4.5” – 5”
g. Safety Relief Valve
h. Suction 6” and Discharge 4”
i. Transmission : Power Take Off (PTO) System.
j. Feeding Pump with Specifications : Rate : 140 m3/hours (14 BPM), Head : 32 m, Suction
and Discharge Diameter : 100 – 125 mm, c/w power source couple to pump engine.
k. Complete With Skid Mounted (integrated with prime mover).
l. Kondisi Brand New (Baru)
m. Prime Mover, type Low Pressure Gas Engine
v Power Capacity : 220 – 234 HP / 167 – 175 kW
v Speed : 100 – 1800 rpm
v Compression Ratio : 10.2 – 1
v Bore : 110 – 130 mm
v Stroke : 140 – 160 mm
v Pulley : type Huff
v Number of Cycle : 4 Cycle with Water Cooled, Overhead Valve, Turbocharger and
Intercooler
v Complete With Skid Mounted (integrated with Pump).
2) Spesifikasi dan Persyaratan Pompa Injeksi Cadangan :