Professional Documents
Culture Documents
Pp1ma1597fr e 00
Pp1ma1597fr e 00
COLOUR: WHITE
TYPE OF ADDITIVE: flame retardant without antimonium trioxide and with very low content of
halogens
CARRIER: Polypropylene
®
APPLICATION: MAXITHEN PP1MA1597FR is designed as a flame retardant for
polypropylene thick-walled articles. This product can be used eg. for the
manufacture of injection molded items. The preparation can be used at
conventional processing temperatures up to approximately 250 ° C
INFLUENCES: The flammability of polymers is greatly influenced not only by the type of
polymer itself, but also to a large extent by the thickness of the walls,
pigmentation, physical construction of the final article, location of the heat
source and exposure time, type and quantity of energy delivered, as well as
the homogeneous distribution of the flame retardant in the final article.
NOTES: In general, flame retardants are thermally unstable and must be protected as
much as possible from excessive heat and long residence times in the
machine. In our experience, with proper management, there will be no
problems.
All the information contained in this MAXITHEN® technical data sheet has been obtained from laboratory
tests under ideal and strictly controlled conditions. The information should serve as a guide only and should
not be construed as a guarantee of specific properties or suitability for a particular application. Therefore,
tests performed by the customer using his polymer and conditions are highly recommended.