Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 18

INVOICE

DARSHINI ELECTRICAL & INTERIORS DATE :- 16/10/2022


No. 10, Royal Apartment PI No. :- DEI/22-23/30
Nai Basti Road, Devli
New Delhi - 110062.
Email : - darshinielectrical95@gmail.com
GSTIN : - 07AAQFD6869C1Z2
Mob : - + 91 9560527339, 9810201460
CLIENT :- PROJECT :-
Mr. MANISH DAWAR RESIDENTIAL ELECTRICAL WORK
628B, DLF CAMELLIAS,
SEC - 42, GURUGRAM. ACTUAL AS PER SITE PREVIOUS QUOTE
`
S.No DESCRIPTION QTY UNIT RATE AMOUNT QTY UNIT
1 MS & PVC CONDUITING
Supply, fixing & Installation of the following sizes of MS
Conduit in the ceiling and MMS PVC Conduit in
wall/Concealed. The conduits are as per ISI marked
conduits (IS: 9537 Part-III) in the ceiling and walls also by
making proper routing as required to complete the work
with accessories such as bends, junction boxes, pull boxes
etc., in recess or on surface including cutting chases in the
walls/floors and making good the same complete as
required for Wiring of sub mains / circuit mains in
concealed / surface complete for lighting / power points
ETC.,Rate shall include cost towards fixing of MS junction
boxes / MS TEE / MS & PVC Bends /wire pull boxes to be
located near junctions for easy drawing of wires. The rate
shall include the chasing of walls/ floors and plastering the
chased portion as required completing.
 25mm & 20mm MS & PVC
Conduit.

2 GI GANG BOX FIXING


Supply, Fixing & Removing of already fixed gang box from
the walls also by making proper routing as required to
complete the work and it also includes fixing of New Gang
box on the walls / Ceiling of following sizes it shall also
include the chasing of wall and fixing the Gang box of the
appropriate sizes according to the requirement & also
includes Job work for Cement & Dust to plastering of the
chased portion as required to complete.
8x6 GI Gang Box.
8x3 GI Gang Box.
5x3 GI Gang Box.
4x3 GI Gang Box.
3x3 GI Gang Box.

3 WIRING FOR LIGHT POINTS


a Wiring For Automation Light & Fan Points -
Supply, fixing, Laying and
Installation of 1100 V grade with 2 runs of 1.5 sqmm as
light half, 3 runs of 1.5 sqmm for Fan & Chandeliers points
by using FRLS insulated multistranded copper wires, in 25
mm dia MS & PVC conduit surface/ concealed in wall /
ceiling confirming to IS 732 including all accessorie from
Automation DB to appropriate points as required to
complete.

b Primary & Secondary / Looping Wiring For Light Points -


Supply, fixing, Laying
and Installation of 1100 V grade 2.5 Sqmm & earthing run
of 1.5 sq.mm as Sub main circuit and 2 runs of 1.5 sqmm as
light half with 1.5 sqmm as earthing FRLS insulated
multistranded copper wires, in 25 mm dia, PVC conduit
surface/ concealed in wall / ceiling confirming to IS 732
including all accessorie.

4 WIRING FOR POWER RECEPTACLES


a Primary & Secondary Wiring For Light & Power Point -
Supply, fixing, Laying of wire for 6A plug point using 2 runs
of 1100 V grade 2.5sqmm & one run of 1.5 sq.mm FRLS
insulated multistranded copper wires, in 25 mm dia MS &
PVC conduit surface /concealed in wall / ceiling confirming
to IS 732 including all accessories.

b Primary & Secondary Wiring For Power Point - Supply,


fixing, Laying of wire for 16A plug point using 2 runs of
1100 V grade 4sqmm & one run of 2.5 sq.mm FRLS
insulated multistranded copper wires, in 25 mm dia MS &
PVC conduit surface /concealed in wall / ceiling confirming
to IS 732 including all accessories.

5 WIRING FOR MAINS


Supply, fixing, Laying of 4 x 25 Sqmm + 16 Sqmm Copper
FRLS Wire for Main Supply from DLF main LT Panel to
internal Flat Distribution board in Existing 40 mm dia, PVC
conduit surface /concealed in wall / ceiling confirming to IS
732 including all accessories.

6 SITC OF POWER RECEPTACLES


Supply, installation, testing & commissioning of following
type power receptacles in brick wall / floor.(Surface or
Recess mounted)
6 Amps Switch Controlled for Light Points & Controller for
Fan Regulators.
6 Amps, 5 pin socket controlled by 6A switch - Single phase
6A/16A, 5 pin socket controlled by 16A switch - Single
phase
6 Amps 5 Pin socket for light power plug.
16 Amps 5 Pin socket for power plug.
Two module fan Regulator step by step type used for
Controlling Ceiling Fan.
6 Amps Two Way Switch.
Single Module Bell Push Button.
Single Module TV Socket.
USB Socket.

7 CO-AXIAL CABLE
Supply, laying, installing, testing & commissioning of RJ6 in
25mm MS & PVC conduits as required and including all
accessories such as modular Jack with modular plate and
the box covered with front modular plat & all necessary
associated hardware including
ferrules etc. as per the specifications complete as required.

8 DATA & VOICE OUTLET


a Supply, laying, installing, testing and commissioning of Cat-
6A 4Pair UTP Data Cable 23 AWG in MS & PVC
conduits/furniture as required and including fixing of all
accessories such as modular Jack with modular plate and
the box covered with front modular Plat & hardware.
b Supply, Laying, installing, testing and commissioning of
0.50mm 2 Pair wire in MS & PVC conduits or in furniture as
required and including only fixing of all accessories such as
modular Jack with modular plate and the box covered with
front modular plat & all necessary associated hardware
including ferrules etc.

9 WIRING FOR SECURITY SURVILANCE


Supply, laying, installing, testing and commissioning of Cat-
6 4Pair 23 AWG Cable / 3+1 Cable in MS & PVC
conduits/furniture as required and including fixing of all
accessories.

10 WIRING FOR VIDEO DOOR PHONE


Supply, laying, installing, testing and commissioning of Cat-
6 4Pair 23 AWG Cable for Signal Transmission and 2 x
1.5Sqmm Copper FRLS Wire for Input Supply of the device
and it laid through MS & PVC conduits/furniture as required
and including fixing of all accessories.

11 WIRING FOR CURTAIN


Supply, installation, testing, and commissioning of wiring
with all the required material for the following points with 4
Core x 1.5 Sqmm FRLS flexible multi stranded copper cable
in concealed or surface mounted 25 mm dia MS & PVC
Conduit including connections as required.

12 WIRING FOR AUDIO VIDEO


Installing, testing and commissioning of 2 Core 1 Sqmm for
Speakers and it laid through MS & PVC conduits/furniture
as required.
13 RACEWAY
Supply and Erecting of enclosed type raceways of G.I.
Raceway of 16G of 300mm x 40mm Raceway. The raceways
shall be hung from ceiling / fixed to wall with necessary
ceiling suspensors, tee, nots, nuts etc, together with tees,
bends etc. as required to complete.

13 FIXING OF LIGHT FIXTURES, CEILING FAN & EXHUST


Fixing, installation, testing & commissioning of following
light fixtures complete of approved make as per
specification with all fitting, accessories with existing
internal wiring of the building along with suitable hangers,
Junction Box, Hardware, Starter, Connector, Lamps, Tube
etc. (All Materials Shall be in client scope)
Ceiling Chandelier Hanging LED lighting fixture complete
in all Respect with lamp.
Surface mounted lighting fixture LED Down/Spot complete
with Driver/LED Strip Light in all respect.
Wall/Floor mounted lighting fixture LED complete.
Fixing of Ceiling Fan & Exhaust Fans.

14 POWER CONTROL CABLE FOR INDOOR & OUTDOOR AC


UNIT 5200 SQFT. 275 1,430,000.00 5200 SQFT.
a Supply, fixing, Laying of wire for 6A plug point using 2 runs
of 1100 V grade 1.5sqmm & one run of 1.5 sq.mm FRLS
insulated multistranded copper wires, in 25 mm dia MS &
PVC conduit surface /concealed in wall / ceiling confirming
to IS 732 including all accessories.

b Supply, Laying & end termination of control wiring for


outdoor unit with 4 core 10 Sqmm Copper Flexible Cable + 2
x 6 Sqmm Copper Flexible wire for main supply of outdoor
unit from main LT Panel to Outdoors.
c Supply, Laying & end termination of control wiring for
outdoor unit with 4 core 6 Sqmm Copper Flexible Cable + 2
x 4 Sqmm Copper Flexible wire for main supply of outdoor
unit from main LT Panel to Outdoors.

17 SUB DISTRIBUTION LT PANEL


Supply, installation, testing & commissioning of WDB's.
these will be wall mounted, indoor duty, dust proof, vermin
proof, front operated, painted and manufactured exactly as
per description laid in this document and will be complete
with the main and auxiliary bus bars, interconnection, earth
terminals, earth bus and will be powder coated finished &
will be powdered coated min 70 micron finished sheet steel
16 BG CRCA doors/covers, 16 BG CRCA frame / base plates.
The MCCB suitable for 415 V AC, 3 phase, 50 Hz, 4 wire AS PER THE GIVEN SLD 120,000.00 AS PER THE GIVEN SLD
supply system and will have fault level of 18 KA. The panel
will be made as per detailed specifications as per the given
SLD.

18 STEAMER WIRING - Supply, Laying and Fixing of Wiring of


steaer by using 4 x 4 Sqmm FRLS Copper Wire with earthing
as required and the cost also includes MS Conduit and
necessary hardwares to complete the same. 40 Mtrs 255 10,200.00

19 Supply and fixing of 4 Pole ELCB for controling of Steamer


and the cost also includes MS Enclosure for the same.
1 No. 4250 4,250.00

20 Supply, wiring & fixing of Additional TV Points through MS


Conduit in Master bedroom, Son's Room & Guest Room
power wiring and Tata Sky as required to complete. 3 Nos. 5850 17,550.00

21 Supply & Wiring of additional power points & light plug


points in the flat as per the site requirement. 12 Nos. 2500 30,000.00
22 Supply & wiring of foot light points as per site requirement.
4 Nos. 1250 5,000.00
23 Supply, Fixing & Installation of Dimmer for Son's Room &
Guest Room, Day room as per site requirement. 3 Nos. 850 2,550.00
24 Supply, Wiring & fixing of buzzer points in the flat as per
site requirements. 5 Nos. 3900 19,500.00
25 Supply, wiring & chaning of looping of light half as
discuused on 16/12/22, for changing of light for Mannual
Points/Non Automation at Master Dresser, Master Toilet,
Day room, Son's Room, Powder Toilet & Guest Toilet as
per additional light points/ Changing of looping as 8 Nos. 750 6,000.00
required by using 2 runs of 1.5 Sqmm wire as required to
complete.

26 Supply, Wiring & changing / Additional Looping of light


half in Automation as discussed on 16/12/22 for Changing
of Automation Wiring at Home Office, Lounge, Entance
looby by laying of 2 runs of 1.5 Sqmm wire from light 8 Nos. 1850 14,800.00
points to automation DB as required to complete.

27 Supply, Wiring and Changing of Automation Light Points


to Mannual Switch board points at Entance Lobby, By
Chasing and fixing of 4 Module Gang box in the wall and
chasing the wall for fixing of conduit and it also includes L/s Nos. 5850 5,850.00
laying of 2 x 2.5 Sqmm as light Circuit and 2 runs of 1.5
Sqmm as light half as per discussed.

28 Supply, Laying, Wiring and Fixing of LED Pin SPot Light in


the TV Panel as required . L/s Nos. 3750 3,750.00

Amount in Words(Without GST) :- TAXABLE


VALUE 1669450.00

Make Payment through Cheque, DD or NEFT/RTGS in Favour of For Darshini Electrical & Interiors
DARSHINI ELECTRICAL AND INTERIORS
A/C No. 202911100005075. DIFFERENCE
Bank :- Union Bank of India
Branch :- Khanpur, Delhi
IFSC Code :- UBIN0820296 Authorized Signatory
PAYMENT TERMS :-
1. 50 % Advance Payment Against Work Order.
2. 15 % Running Payment After Completion of Conduit Work.
3. 10 % Running Payment After Completion of Wiring Work.
4. 05 % Runnig Payment After Completion of Lighting
5. 10 % Running Payment on Fixing of Power Receptacles.
6. 10 % After Handover.
NOTE -
1. GST WILL BE CHARGED 18% AS PER GOVT. RULE IN THE TAXABLE AMOUNT.
2. IF ANY CHANGES DONE AT SITE/NEW POINTS ADDED OR REDO WORK DONE IT WILL BE CHARGED ON
ACTUAL.
3. IF ACTUAL AREA MEASUREMENT IS DIFFERENT FROM GIVEN ESTIMATE THEN IT WILL BE CHARGED
AS PER ACTUAL MEASUREMENT.
4. ALL MATERIALS AND WORK EXECUTIONS ARE AS PER DLF NORMS ONLY.
5. FOR AUTOMATION ONLY WIRING WILL BE DONE... KEYPADS, GANG BOXES, MODULES,
AUTOMATION DB AND MCB & AC THERMOSTATE WORK NOT IN OUR SCOPE.

6. NOTE - COST DIFFERENCE FOR GLASS PLATE TO METAL PLATES NOT INCLUDED IN THE COST SO IT
WILL BE CHARGED EXTRA ON ACTUAL.

FINAL MATERIALS MAKE

S.No MATERIALS BRAND


1 MS & PVC PIPE BEC / AKG / POLYPACK / ASTRAL
2 MS ACCESSORIES & FITTINGS. JINDAL / BEC / AKG
3 GI GANG BOX LEGRAND / SCHNIEDER
4 COPPER FRLS WIRES BONTON
5 COPPER FLEXIBLE CABLES FRLS BONTON / POLYCAB
6 CO - AXIAL CABLE POLYCAB / FINOLEX
7 CCTV CABLE - CAT 6 & TELEPHONE WIRE D - LINK / AMP & FINOLEX / DELTON
8 POWER RECEPTACLES. NORISYS - CUBE SERIES
9 MCB L&T / SCHNIEDER
OUS QUOTE

RATE AMOUNT
275 1,430,000.00
N SLD 120,000.00
1550000

E 119450.00

You might also like