Professional Documents
Culture Documents
Ctse2010 Eeds
Ctse2010 Eeds
PIP:
External Coating Systems PIP CTSE2010
CTSE2000
Description:
Inorganic zinc (IZ) primer with a two-coat silicone acrylic finish.
Surfaces:
Carbon steel. Do not apply to stainless steel or nickel alloy surfaces.
Surface Preparation: Abrasive blast to SSPC SP-10 with a nominal profile of 2 mils.
SYSTEM
Coat Type Application Minimum Maximum Shop (S)/
No. Code Generic Type Method DFT, mils DFT, mils Field (F)
1. IZ Inorganic Zinc S 2.5 4
2. SA Silicone Acrylic S .5 1
3. SA Silicone Acrylic S 1 2
Total: 4 7
*Application Method: S=Spray; B=Brush; R=Roller
Notes:
Unless otherwise specified, refer to the coating manufacturer’s data sheets for information on the recommended
application temperature range, wet film thickness, approximate coverage in square feet/gallon, pot life, and drying times to
touch, handle, and cure for each coating product. The maximum use temperature of silicone acrylic coatings may vary
from each manufacturer.
Mixing and Thinning: Mix according to manufacturer’s instructions and SSPC PA-1.
Notes: