1.1 Section List of generic products included in this section.
Includes Don’t overly describe 1.2 Related Sections List of products with a direct relationship to the products in this section. 1.3 Allowances List of products that are covered by quantity or cash allowances (price can’t be determined) 1.4 Unit Prices List products and work covered by unit prices and the method for measuring quantities 1.5 Alternates List products to be considered as alternates 1.6 References List standards referenced in the section complete with designations and titles 1.7 Definitions Define highly technical terms used in this section 1.8 Performance Describe the performance criteria to be met by Requirements completed construction 1.9 Submittals Include data to be furnished by contractor before, during and after construction 1.10 Quality List qualifications of the contractor, Assurance manufacturers, installers, etc. Include standards by which work will be judged (field samples, mock-ups). Include requirements for meetings to coordinate products and techniques. 1.11 Delivery State packing, shipping, handling and unloading Storage and requirements. State measures needed to prevent Handling damage to products prior to application/ installation. 1.12 Project State environmental limitations required for Conditions proper installation or application (temperature, humidity, ventilation, illumination) 1.13 Sequencing State requirements for coordinating work that and Scheduling must be done in a particular sequence with another work. 1.14 Warranty Describe special or extended warranty or bonds covering performance of the work. 1.15 Maintenance List items to be supplied by contractor for future maintenance/repair; List only maintenance service paid in advance. 2.1 Manufacturers List names of manufacturers with the capacity to provide products specified in the section 2.2 Materials Specify basic materials used for field fabrication or factory manufacture. Use industry standard reference. 2.3 Manufactured Specify factory manufactured products. Identify Units manufacturer, product name and catalog number. 2.4 Accessories Describe requirements for secondary items that aid primary products. 2.5 Mixes Specify mixes to be used for field or factory use. 2.6 Fabrication Describe specific shop assembly procedures. 2.7 Source Quality Indicate requirements for quality control at off- Conrol site fabrication plants. 3.1 Examination State actions required to determine that conditions are acceptable to receive products. 3.2 Preparation State actions required to prepare the surface, area, or site 3.3 Erection/ State actions required to accomplish specified Application/ unit of work Installation 3.4 Field Quality Describe tests and inspections Control 3.5 Manufacturer’s Describe requirements if manufacturer’s are to Field Services provide field quality control 3.6 Adjustment and Describe final actions required to prepare Cleaning installed product to perform properly 3.7 Demonstration State requirements for installer to train owner’s personnel in the operation of equipment 3.8 Protection List provisions for protecting work after installation 3.9 Schedule Schedules which indicate product/ equipment locations and other coordinating data