Professional Documents
Culture Documents
etar504lrbk
etar504lrbk
Model: ET-AR504LR-BK
2.1 Soundstage Speakers with Subwoofer
BASS+
BASS- MUTE
MAST-
2. Safety Instructions
Caution: Electric Shock Hazard
When using this electronic appliance, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
1. Do not use this product near water i.e. 5. Do not attempt to repair the product on
bath tub or swimming pool. your own. It contains no user serviceable
2. Unplug from AC outlet when not in use parts.
and before cleaning. 6. Do not dispose of batteries in fire. They
3. Close supervision is necessary when may explode. Check local codes for
used near children. battery disposal instructions.
4. Clean only with dry cloth.
1 15 TRE+
TRE-
17
RESET
3 9
BASS- MUTE
18
14 MAST+
AUDIO OUTPUT
4 10 12
MAST-
POWER SOURCE
5 7
11
6
19
1. Status LED 7. Power cord 14. Bass-
Displays Volume, Treble, Bass, EQ Connects to 110V AC outlet Decreases bass level
2. Menu 8. Audio input 1 15. Tre+
Switches functions: Volume, Treble or Auxiliary 3.5mm plug Increases treble level
Bass 9. Audio input2 16. Tre-
3. Up arrow Standard RCA plug Decreases treble level
Increases volume or adjusts selected 10. Power switch 17. Reset
menu function Turns speakers on/off Resets Bass and Treble settings to
4. Down arrow 11. Mast+ factory default
Decrease volume or adjusts selected Increases master volume 18. Mute
menu function Turns on/off master volume
12. Mast-
5. Left arrow Decreases master volume 19. Battery compartment
Selects previous menu function Insert battery with letter facing up
13. Bass+
6. Right arrow Increases bass level
Selects next menu function
AUX Bass
2
2. CD Input Indicator 7. Bass Adjustment Indicator
(models with CD input) Indicates if the system is being set to
Indicates if the system is currently 3
Bass Adjustment Mode
using the CD input
4
8. Subwoofer Indicator
3. Auxiliary Input Indicator Indicates if subwoofer is in use
(models with Aux input) 5
Indicates if the system is currently
using the Aux input 6
4. Power On Indicator
Indicates if the system is turned 7
on or off
8 SUB WOOFER
5. Volume Indicator
Indicates if the system is being set to
Volume Adjustment Mode
Adjusting Volume/Mute using Remote Control Adjusting Treble/Bass using Remote Control Resetting EQ Levels using Remote Control
2. For best tonal fidelity, we recommend setting your audio source to line level output and
use the speaker to control overall volume level.
3. For best tonal fidelity, we recommend using the default EQ levels so you hear the music
at exactly the same way it was recorded. The easiest way to do this is by pressing the
Reset button located on the remote control.
4. This speaker system is most efficient when the volume level is set between 30% to 80%.
You get highest sound quality and minimum distortion within these volume levels.
5. Place the satellite speakers at least 16 inches from each other. This enhances stereo
sound effect and perceived sound field.
6. Provide ample space around the subwoofer unit. It needs enough room to move massive
amount of air! To further enhance lower frequencies, place the subwoofer unit near walls.
• Drivers:
-Satellites: Dual 3-inch midrange and
1-inch tweeter with solid wood enclosure
-Subwoofer: 5.25-inch drivers with solid wood enclosure
• Speaker Dimension
(H x W x D):
-Satellites: 4.33” x 9.65” x 4.77”
-Subwoofer: 6.7” x 11.03” x 10.25”
FAQ http://faq.eagletechusa.com/
RMA http://rma.eagletechusa.com/
© 2008 Eagle Tech Computers, Inc. All rights reserved. Eagle Tech, the Eagle Tech logo and other Eagle
Tech marks are owned by Eagle Tech and may be registered. All other trademarks are the property of their
respective owners.
www.eagletechusa.com
Phone: 626.956.4040
Fax: 626.810.4820