Professional Documents
Culture Documents
DY-AJMR020P00B 4-Element Anti-Jam Antenna
DY-AJMR020P00B 4-Element Anti-Jam Antenna
Product Usage
Covering BDS B1, GPS L1, GLONASS L1 frequency points, it is widely used in military
communication equipment such as command aircraft and ground mounted vehicles, especially
suitable for situations with special requirements for anti-jam. This antenna array is used in
conjunction with anti-jam satellite receivers and can provide navigation and positioning services for
the system in strong interference environments.
Product Description
1. The antenna array consists of four BDS B1, GPS L1, and GLONASS L1 anti-jam units.
2. The amplification circuit has high out of band suppression and high linearity, ensuring that it
can still function normally in the presence of strong interference signals around it.
3. Built-in voltage regulator circuit, it can operate normally within a wide input voltage range.
Main Function
Receive satellite signals from GPS-L1, BDS-B1, Glonass-L1, and Galileo-E1.
Can suppress various types of interference such as harmonic, sweep, pulse, white noise,
frequency modulation, amplitude modulation, and equalization in the GPS-L1, BDS-B1, and
Glonass-L1 frequency bands.
Electrical Specifications:
Interface Definition
The connector model of the digital communication control interface is J30J-9ZK, which provides
Interface Definition
Output Connector SMA-K (RF connector) J30J-9ZK(Data connector)
Dimensions 132×132×34 mm
Weight ≤600g
Operating Temperature -40℃~70 ℃
Storage Temperature -40℃~85 ℃
Installation
The antenna is equipped with 4 through holes with a diameter of φ2.2mm, allowing for fixation
with M2 screws through these holes.