Professional Documents
Culture Documents
RecoverPoint WARNING RPA fan failure detected. Contact EMC Customer Service. Dell 中国
RecoverPoint WARNING RPA fan failure detected. Contact EMC Customer Service. Dell 中国
文章编号: 000078797
� 打印
RecoverPoint: WARNING: RPA fan failure detected. Contact EMC Customer Service.
受众级别: 内部
文章内容
症状
Severity : Critical
ID : 1354
Date and Time : Wed May 8 13:23:36 2013
Category : Instrumentation Service
Description : Power supply detected a failure Sensor location: PS 2 Status
Chassis location: Main System Chassis Previous state was: Unknown Power Supply
type: AC Power Supply state: Presence detected, AC lost
Severity : Critical
ID : 1306
Date and Time : Thu Feb 21 16:24:04 2013
Category : Instrumentation Service
Description : Redundancy lost Redundancy unit: System Board PS Redundancy
Chassis location: Main System Chassis Previous redundancy state was: Unknown
Version: SE5C600.86B.01.06.0002.110120121539
原因
Fan failure warnings may be caused by power supply issues. However, since a power cycle clears them, RecoverPoint Engineering believe
that in these events are benign (although they cannot state that these warnings are false 100% of the time). See Resolution.
解决方案
W
Woorrkkaarroouunndd::
article number.
内部注意事项
SSuuppppoorrtt C
Ceenntteerr::
This will only clear these warnings from the GUI so they do not bother them.
In case both Resolution step one, and two did not help, there might be an ongoing H/W issue, OR electricity supply issue (usually all RPA's
on the site are experiencing the problem), you can do the following:
For example:
For more information, consult Bugzilla defect number 38273, 38452, 38974, and 39131.
文章属性
受影响的产品
RecoverPoint
产品
上次发布日期
20 11月 2020
版本
文章类型
Solution