Professional Documents
Culture Documents
Waratah Head Configurator Training 51.0
Waratah Head Configurator Training 51.0
1 W aratah Overview
This option allows the bushing material used for both delimb and feed arms to be selected.
The nyoil bushing material deforms (elastically) more than a bronze bushing. This results in
less load on delimb arms and feed arms, in turn reducing overall wear on these components
Front Knife
Retention Wear Plates
Valve
Feed Wheels
Main saw
Links
Top Saw
Body Installation Kits
Colour
Upper Delimbs Feed Motors Marking
Find End Automation
3 W aratah Overview
Note: Click one of the links above or scroll down to begin training
Select and open the last configurator file that you have from Waratah NZ
4 W aratah Overview
5 W aratah Overview Navigation Page
6 W aratah Overview Navigation Page
7 W aratah Overview Navigation Page
Click Here For More
8 W aratah Overview Navigation Page Information
Click Here For More
9 W aratah Overview Navigation Page Information
Click Here For More
10 W aratah Overview Navigation Page Information
Click Here For More
11 W aratah Overview Navigation Page Information
Click Here For More
12 W aratah Overview Navigation Page Information
Click Here For More
13 W aratah Overview Navigation Page Information
Click Here For More
14 W aratah Overview Navigation Page Information
Click Here For More
15 W aratah Overview Navigation Page Information
Click Here For More
16 W aratah Overview Navigation Page Information
Click Here For More
17 W aratah Overview Navigation Page Information
Note:
Not available in Latin
America, Europe and
Click Here For More Brazil
18 W aratah Overview Navigation Page Information
Head Controller Update – TimberRite H16 is now standard on all
production heads
Waratah has released its new H16 head controller package across all models. This software
uses the latest controller modules and utilizes a user friendly interface.
This system has both a preselection system and a value based optimization system which
can be unlocked via software key
Heavy Duty
Delimb Arms Close 265 Bar Relief Pressure set to 240 Bar
Feed Arms Close 210 Bar Relief Pressure set to 190 Bar
Standard
Delimb Arms Close 210 Bar Relief Pressure set to 180 Bar
Feed Arms Close 150 Bar Relief Pressure set to 120 Bar
Wear Plate
Note:
622B / 623C / 624C and 625C Single Stem is the default option
27 W aratah Overview Navigation Page
MTP - 622C 4X4 and 624C 4X4
Suitable for single and multi stem applications
MTP 22Tx140mm
WA123653
Gear Cut Fine 65Tx16mm Gear Cut Fine 48Tx16mm Note: Not available with
WA122056 WA101782 Cast – Swept arms
Gear Cut Fine 48Tx16mm Gear Cut Fine 65Tx16mm Non Jingle Dual 48Tx22mm
WA101782 WA122056 WA129609
Gear Cut Coarse 25Tx16mm Gear cut Coarse 30Tx50mm Gear cut Coarse 22Tx80mm
F350380 WA112973 WA106229
Note: Debarking Application
42 W aratah Overview Navigation Page
624C
Note:
• Slotted links use Nyoil bushings only in the unslotted end
• 624C and 626 do not have the option for bronze alloy bushes in the feed arm link
• Nyoil bushings are intended for a hardwood application
616C / 618C - Heavy Duty OMV 400HD TMVW 630 238 1050
616C / 618C - High Speed OMV 315HD TMVW 500 300 920
622B - Standard OMT 400HD MS08 702cc 214 1116
622C - Standard OMT 400HD MS08 702cc 214 1116
623C - Heavy Duty TMVW 630 MS11 1048cc 172 1666
623C - High Speed TMVW 500 MS11 837cc 195 1331
624C 4X4 - Heavy Duty TMVW 630 MS11 1048cc 172 1666
624C 4X4 - High Speed TMVW 500 MS11 837cc 195 1331
624C - Standard TMV 630 MS11 1048cc 172 1666
625C - Standard TMV 800 MS18 1395cc 155 2218
626 - Standard OMV 800 MS18 1395cc 155 2218
616C
624C 4X4
Note:
Dual find end required for multi stem
processing with 622C 4X4 and 624C 4X4
Defection guard
This system has both a preselection system and a value based optimization system which
can be unlocked via software key
XL4 - 12.1” Touchscreen - High production option required for running optimization, GPS,
WaratahMate and other features
PC sensor lead and pressure switch for tracking the idle time
of a machine
Select WaratahMate:
This system uses a USB wireless dongle and a phone app based program to
allow the production data to be transferred easily to a predetermined email
Note:
This has been superseded on production heads by
TimberRite H16
75 W aratah Overview Navigation Page
TimberRite 30 High uses a value based optimisation system (Silvia) for processing.
High production XL4 PC is standard with this system
Note:
This has been superseded on
production heads by TimberRite H16
76 W aratah Overview Navigation Page
Select Heel Rack:
This system uses an its own touch screen computer which requires no keyboard
Note:
This has been superseded on
production heads by TimberRite H16