Professional Documents
Culture Documents
Eskvs Ce
Eskvs Ce
MG CO., LTD.
www.mgco.jp
MODEL: KVS
Screw terminal: Chromated steel STANDARDS & APPROVALS
Housing material: Flame-resistant resin (black) EU conformity:
Isolation: Input to output to power EMC Directive
Overrange output: Approx. -10 to +120 % at 1 – 5 V EMI EN 61000-6-4
Zero adjustment: -5 to +5 % (front) EMS EN 61000-6-2
Span adjustment: 95 to 105 % (front) Low Voltage Directive
EN 61010-1
INPUT SPECIFICATIONS Installation Category II
■ DC Current: Pollution Degree 2
Shunt resistor attached to the input terminals (0.5 W) Input or output to power: Reinforced insulation (300 V)
Specify input resistance value for code Z. Input to output: Basic insulation (300 V)
■ DC Voltage: -30 – +30 V DC RoHS Directive
Span: Min. 3 mV, max. 30 V
Offset: Max. 1.5 times span
Input resistance
Span 3 – 10 mV : ≥ 10 kΩ
Span 10 – 100 mV : ≥ 10 kΩ
Span 0.1 – 1 V : ≥ 100 kΩ
Span ≥ 1 V : ≥ 1 MΩ
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 15 V max.
■ DC Voltage: -10 – +12 V DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
Load resistance: Output drive 1 mA max. at ≥ 3 V
INSTALLATION
Power input
• AC: Operational voltage range: rating ±10 %,
50/60 ±2 Hz, approx. 2 VA
•DC: Operational voltage range: rating ±10 %,
ripple 10 %p-p max., approx. 2 W (80 mA at 24 V)
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 400 g (0.88 lb)
MG CO., LTD.
www.mgco.jp
MODEL: KVS
EXTERNAL DIMENSIONS unit: mm [inch]
CLAMP
(top & bottom)
7.8 [.31]
[.79]
20
DIN RAIL
35mm wide 6 5 4 3
80 [3.15]
80 [3.15]
2–4.5 [.18] dia.
MTG HOLE
15 [.59] deep
7 8 1 2
8–M3.5
SCREW
50 [1.97] 103 [4.06] 40 [1.57]
123 [4.84] (3.3 [.13]) 50 [1.97]
6 5 4 3
12 [.47]
7 8 1 2
Isolation Z S
5 7 U(+)
POWER
6 8 V(–)
Base Socket
MG CO., LTD.
www.mgco.jp