Professional Documents
Culture Documents
2.LouverAllProducts Catalog
2.LouverAllProducts Catalog
January
1 2014
Page Header
Louver Selection Guide
2
Page Header
Louver Selection Guide
3
Page Header
Drainable Blade
• Drainable blades offer excellent resistance to water penetration.
• Drain gutters located on every blade to capture water.
• Integral downspouts located within the jambs to channel water downward to sloped sill for drainage away from
the louver.
• EDD Series incorporates dual drainable blades for additional water capture.
• EHM Series incorporates recessed mullion design for continuous blade appearance for multiwidth sections.
• Models ESD-435 and ESD-635 lend 56% and 59% free area respectfully.
Recessed Mullion
Flat Sill
Sloped Sill
Sill Pan
EDD-401
EHM-601
Drainable Drainable
Blades Drainable
Blades
Blades
4
Page Header
Drainable Head
• Drainable head member improves ability to prevent water penetration due to an additional drain gutter, designed
to capture water.
• Models EDJ-430 and EDK-430 have optional 30 degree blades designed to maximize free area.
• Model ESID-430 is an air intake/discharge louver, which helps prevent the short cycling of air.
J Blades J Blades
EDJ-430
EDJ-401
Exhaust Blades
K Blades
Separator Plate
Intake Blades
ESID-430 EDK-402
5
Adjustable
Non-Drainable
• Traditional stationary J or K blade styles.
• K blade has as additional offset or “rain hook” for extra protection against water penetration.
• Design incorporates hidden mullions for continuous blade appearance when multiwidth sections are needed.
J Blades K Blades
ESJ-401 ESK-402
J Blade K Blade
6
Recessed
Combination
Mullion
• Recessed mullion designs offer better blade alignment for a true continuous blade appearance.
• Provides more structural integrity between multiwide sections.
• Easier installation with minimal field adjustments.
• Models are easier to seal in the field and thermal expansion is accounted for within the design.
J Blades K Blades
ESJ-401RM ESK-402RM
7
Adjustable Blades
• Design incorporates operable blades that can be opened or closed to protect air intake and exhaust openings in
exterior building walls.
• Louver blades are center pivoted and can be operated manually or by electric or pneumatic actuators.
• EAD and EAH Series offer concealed blade linkage.
• EADC Series offer both concealed blade linkage and a concealed electric actuator.
• Model EAH-690 provides 70% free area when blades are in full 90 degree open position.
Adjustable Blades
Adjustable Blades
Concealed
Blade Linkage
Concealed
Blade Linkage
EAH-401 EAH-690
8
Acoustical
Combination Louver/Damper
• Maintains a stationary appearance when adjustable blades are closed.
Drainable Head
• ECD Series offer exposed on-blade linkage.
• EAC Series and Model EACN-601 offer concealed linkage and center Center Pivot
pivot operable blades. Adjustable Blade
Drainable Head
Drainable Head Drainable Head
Center Pivot
Center Pivot Adjustable Blade
Adjustable
Center Pivot Airfoil Blade
Adjustable Blade Concealed Blade
Concealed Blade Linkage
Stationary Blades
Linkage
Drainable
Drainable
Stationary Blades
Concealed Blade Stationary Blades
Linkage
Flat Sill
Sloped Sill
Concealed
Flat Sill Actuator Location
Drainable Head
Drainable Head Drainable Head
Exposed
On-Blade Linkage
Adjustable Intake Adjustable Exhaust
Gravity Blades Gravity Blades
9
Page Header
Sightproof
• Louvers are designed to prevent visual see-through, can be applied as air intake or discharge louvers, or can be
applied as louvered equipment screens.
• SES Series most economical of all sightproof models.
• SEH Series incorporates a drainable head member for increased protection against water penetration.
• SED Series offer both a drainable head member and drainable blades for maximum protection against water
penetration.
• Model SED-501 offers 57% free area.
• SEV Series offer a vertical sightproof blade design.
Drainable Drainable
Sightproof Head Sightproof Head
Drainable Drainable
Sightproof Blades Sightproof Blades
Flat Head
Sightproof Head Drainable
Sightproof Head
10
Page HeaderRain
Wind-Driven
• The most effective line of products for minimizing water penetration through openings that are sensitive to rain
penetration.
• All models incorporate a drainable head member and either vertical (EVH Series) or horizontal (EHH Series) rain-
resistant blades to provide maximum resistance to wind-driven rain, as tested by the stringent AMCA 500L test
procedure.
Drainable Head
Drainable Head
Vertical Rain-
Horizontal Rain- Resistant Blades
Resistant Blades
**
Shipped loose formed aluminum sill pan required for models EHH-201, EHH-401, EHH-501, EHH-601, EVH-201, EVH-401.
11
Page Header
Florida Product Approved
• All mechanically fastened Florida Product Approved models comply with TAS-202 and Uniform Static Pressure
Test (ASTM E330).
• Models also comply with TAS-201 Large Missile Impact Test (ASTM E1996) and TAS-203 Cyclic Wind Pressure
Load Test with optional welded construction.
• Approved for use in Florida’s High-Velocity Hurricane Zone if Miami-Dade Notice of Acceptance is not required.
Drainable Blades
Drainable Blades
Sloped Sill
Sloped Sill
ESD-435X ESD-635X
Florida Product Approved No.: Florida Product Approved No.:
FL6876.3 FL6876.4
Drainable Head
Rain-Resistant Blades
+
Formed aluminum sill pan
EHH-501X
Florida Product Approved No.:
Drainable Head
FL6876.2
Formed
Acoustical Head
Formed
Acoustical Sill
Formed Sill Pan
Flat Sill
EVH-602X AFJ-601X
Florida Product Approved No.: Florida Product Approved No.:
FL7494.1 FL6876.1
+
Shipped loose formed aluminum sill pan required for model EHH-501X.
Beginning Pressure Drop Exhaust
Blade Frame Max. Intake
Blade Free Area Free Area Point of Water at Max. Intake Volume Flow
Model Depth Thickness Thickness Volume Flow
Style (sq. ft.) (%) Penetration Velocity Rate @ 0.15
(in.) (in.) Rate (cfm)
(ft./min.) (in. wg) in. wg (cfm)
AFJ-601X 6 J 0.080 0.080 4.89 31 799 0.065 3907 6015
EHH-501X 5 RR 0.081 0.081 6.80 43 1250 0.224 8500 5998
ESD-435X 4 D 0.081 0.081 8.98 56 1151 0.213 10336 9281
ESD-635X 6 D 0.081 0.081 9.41 59 1077 0.173 10135 9932
EVH-602X 6 RR 0.081 0.081 5.88 37 1250 0.174 7350 7873
* Test size: 48 x 48 in. unit @ 15 min. duration RR = Rain-Resistant J = J Style D = Drainable
12
Page Header
Florida Product Approved
13
Page HeaderQualified
Miami-Dade
• Use within Florida’s High-Velocity Hurricane Zone when a Miami-Dade Notice of Acceptance is required.
• All models comply with Miami-Dade structural test protocols TAS-201, Large Missile Impact Test (ASTM E1996);
TAS-202, Uniform Static Pressure Test (ASTM E330) and TAS-203, Cyclic Wind Pressure Test.
• Models ESD-603D with HCD-240, EHH-601D with VCD-40 and EVH-602D with VCD-40 also comply with
Miami-Dade’s test protocol TAS 100A, Wind-Driven Rain Resistance Test.
Drainable Head
Drainable Head
Retaining Angle
Retaining Angle
Factory Installed
Control Damper
Drainable Blades
Drainable Blades
Manual Quadrant
Actuator (Electric also
Sloped Sill available)
Sloped Sill
ESD-635D
ESD-635D with VCD-40
Florida Product Approved No.: FL10088.3
Florida Product Approved No.: FL10088.4
NOA NO.: 07-1015.06
NOA NO.: 07-1015.06
Vertical Rain-Resistant
Sightproof Blades
Blades
ESS-502D
EVH-602D
Florida Product Approved No.: FL12941.1
Florida Product Approved No.: FL8042.1
NOA NO.: 09-0519.15
NOA NO.: 06-0711.1
14
Page HeaderQualified
Miami-Dade
Drainable Head
Concealed Linkage
Sloped Sill
EACA-601D
Florida Product Approved No.: PENDING
NOA NO.: PENDING
Optional factory provided roof curb available. Optional factory provided roof curb available.
ESD-635PD EHH-601PD
Florida Product Approved No.: FL11350.2 Florida Product Approved No.: FL11350.1
NOA NO.: 08-0505.05 NOA NO.: 08-0505.06
Blades
Blades
ESU-130S ESF-145
Frame
Frame
Blades
Blades
ESU-150
ESJ-150
16
Acoustical
• Acoustically insulated blades provide sound absorption from escaping noise.
• Available in formed aluminum or steel material.
• AFJ Series is the most economical of all acoustical models.
• Model AFA-801 offers the highest free area, has the lowest airflow resistance, and is designed with acoustical
blades.
• Model AFS-120 offers the best sound absorption performance and incorporates sightproof blades.
Formed Head
Formed
Perforated Aluminum Acoustical Head
Insulation Screen
Formed Acoustical Sightproof Blades
with Fiberglass Insulation
Formed Sill
Perforated Aluminum
AFA-801 Insulation Screen
Formed
Acoustical Sill
AFS-120
Formed
Acoustical Head
AFJ-801 11 11 13 19 28 20 12
AFJ-801 AFJ-120 13 12 17 25 36 25 16
AFS-120 11 11 16 25 36 31 16
17
Fabricated
• Fabricated from galvanized steel and are low cost compared to extruded aluminum models.
• All fabricated models are available in stainless steel material.
• FSJ and FDS Series have stationary blades only.
• FAD and FAJ Series are adjustable blade models.
Formed Adjustable
Formed Adjustable J Blades
Drainable Blades
FDS-402 FSJ-402
18
Special Application
Sand
d Louver
Greenheck’s sand louver is designed to protect air intake and exhaust openings
in building exterior walls from wind-driven sand. Design incorporates vertical
sightproof blades to separate sand from the airstream, which is then channeled
out at the sloped sill.
FSL-401
19
Accessories and Options
We have a full line of accessories, so whether your project necessitates security bars or filter
racks, we have what you need. An extensive line of standard finishes, including Kynar® paint,
baked enamel paint, industrial coatings or anodize finishes are also available. In addition to our
complete line of standard colors, our custom color matching capabilities are endless. These
accessories and options allow Greenheck to complete your project just as you envision it.
Glazing
Adapters
Flanged Frame
Bird Screen or
Insect Screen
Filters &
Structural Filter Racks
Reinforcing
Greenheck Fan Corporation Greenheck Fan Corporation certifies that Greenheck Fan Corporation Greenheck Fan
certifies that Models EVH- Models ESD-635D, 603D; ESS-502D; certifies that Models EAH- Corporation certifies
201, 401, 602, 801; EHH- ESD-435X, 635X; ESJ-202, 401, 602; 690 with blade angle at 90º that Models AFJ-120,
201, 401, 501, 601, 701; ESK-402, 602; ESJ-401RM, 602RM; and FSL-401 are licensed 601, 801; AFA-801;
EVH-602D; EHH-601D; EHH- ESK-402RM, 602RM; EDJ-202, 401, to bear the AMCA Seal. The AFS-120; and AFJ-
501X; and EVH-602X are 601, 430; EDK-402, 430, 602; ESD- ratings shown are based 601X are licensed to
licensed to bear the AMCA 202, 403, 435, 603, 635; EDD-401, on tests and procedures bear the AMCA Seal.
Seal. The ratings shown are 601; EHM-601; SES-202, 401; SEH- performed in accordance The ratings shown are
based on tests and proce- 202, 401; SED-202, 401, 501; ECD- with AMCA Publication 511 based on tests and
dures performed in accordance with AMCA Publication 401, 601; EAC-401, 601; EACA-601; EACN-601; EAD-401, and comply with the requirements of the AMCA procedures performed in accordance with
511 and comply with the requirements of the AMCA 601; EAH-401; FSJ-402, 602; FDS-402, 602; FAJ-402, 602; Certified Ratings Program. The AMCA Certified AMCA Publication 511 and comply with the
Certified Ratings Program. The AMCA Certified Ratings and FAD-402, 602, 635 are licensed to bear the AMCA Seal. Ratings Seal applies to air performance. requirements of the AMCA Certified Ratings
Seal applies to water penetration, air performance and The ratings shown are based on tests and procedures per- Program. The AMCA Certified Ratings Seal
wind-driven rain. formed in accordance with AMCA Publication 511 and comply applies to water penetration, air performance
with the requirements of the AMCA Certified Ratings Program. and sound ratings.
The AMCA Certified Ratings Seal applies to water penetration
and air performance.
The Greenheck Fan Corporation certifies that Louver Type ESD-435X, ESD-635X,
ESD-635D, AFJ-601X, EHH-501X, EVH-602X, ESS-502D, EHH-601D, EVH-602D and
EVH-660D shown herein are approved to bear the AMCA Listing Label. The ratings
shown are based on tests and procedures performed in accordance with AMCA
Publications and comply with the requirements of the AMCA Listing Label Program
Our Commitment
As a result of our commitment to continuous improvement, Greenheck reserves the right to change
specifications without notice.
Specific Greenheck product warranties are located on greenheck.com within the product
area tabs and in the Library under Warranties. Prepared to Support
Green Building Efforts
00.LVR.1000 R4 1-2014 IP
P.O. Box 410 • Schofield, WI 54476-0410 • Phone (715) 359-6171 • greenheck.com Copyright © 2014 Greenheck Fan Corporation