Progestin uy
cem-7500223006
(CRGO Power & Distribution Transformer Mitred laminations in all grades
Transformer Core Frame Assemblies upte 100 MVA.
Toroidal Cores for General & Special Applications
(CREO / CRNGO Rectangular Strips & Assemblies
[ERGO / CRNGO SIit Col
Cut Core & Unicore
Transformer Reactor CoreVikarsh Stampings India Private Limited is amongst the
leading manufacturers, suppliers and exporters of
performance guaranteed and high quality Cold Rolled,
Grain Oriented electrical steel products in conventional
Hi-B and Domain Refined grades. Established in the year
2003, the company achieved considerable growth in
‘output and customer base. Apart from conventional cut to
length lamination, Vikarsh stampings Diversified itself to
Toroidal Cores and Winding of Cores as value added
services for some ofits key customers.
Also built up core is an added advantage to its customers.
saving value andtime.
The Facility is about 12,000 squmt in area with 2 double-
bay sheds totalling to 6,000 sq.mt. Vikarsh Stampings
India Pvt Ltd, has made a firm consolidation inits business
though meticulous planning and continual improvement in
quality of its products te fulfil customer's requirements.
Vikarsh Stampings India Pvt. td. is an |SO 9001-20155
45001-2018, OSHAS 18001:2007 Certified Company,
To Create Everlasting Values
We strive to create everlasting value for all our
CUSTOMERS through extraordinary efforts. With
professionalism, quality focus, integrity, imagination and
respect forindividuals.
Everlasting to us means timeless - value that will endure,
regardless of changes in our businesses, people, markets
or geographies. By constantly setting and redefining the
gold standard in every business we operate in, we will
create enduring value for our employees, customers,
partners and society,
To become a core company dedicated to provide quality
oriented and competitive products toits customers in India
and worldwide. We insist on maintaining a friendly, fair
and creative work environment which respects diversity
newideas & hard work.
‘We at Vikarsh Stampings India Pvt. Ltd. are committed to follow the quality management system laid down, to ensure cost
effective quality of our products. By adopting a process approach and a continual improvement policy, we will achieve
consistent product quality, thereby leading to Total Customer Satisfaction:OUR PRODUCTS
1) Power & Distribution Transformer Mitred 3) CRGO & CRNGO Rectangular
laminations in CRGO in all grades Strip Lamination
. i
+ Inmitred and step lap (vertical and horizontal) VIKARSH manufactures transformer laminations for
requirements upto 100MVA, transformers from 11 KV to 765 KV class using Cold rolled
+ Blade size= 1050 mm width, Grain Oriented (CRGO} steel imported from Japan, U.S.A
+ Lamination processing capacity 4800MT / annum. UX, Korea, China and Russia, in various grades
(Conventional and Hi-B) and Laser Scribed process
2) Transformer Core Frame Assembly laminations with a high degree of precision for
transformers {rom 10 KVA / 11KV to 100 MVA / 400 KV
class as percustomer specification,
Specification:
+ Transformer core lamination / cut te size lamination for
the power and distribution transformers, Width up to
640 mm and length upto 5000 mm,
+ Strip lamination for instrument transformer industry on
CNC machines.
+ Lamination processing capacity -3000 MT / annum,
100 MVA frame structure and core building made inhouse and
testing carried out for new load loss (NLL) and ready for
insertion of LV&HV coils
Packing of Core
As per international standard, suitable for Sea Transport, Land
Transport &irTransport. Core are protected from humidity.OUR PRODUCTS
4) CRGO & CRNGO Toroidal Core
5) CRGO & CRNGO Slit Coit
Round and rectangular Toroidal cores having the accuracy,
Suitable for low, medium and high voltage CT's and
Transformers,
FEATURES:
1, Manufactures outside diameter upto 1500mm,
2. Winding of wound cores as per customer specification.
3, Annealing in controlled Nitrogen atmosphere at 800°
4, 100% of ourcores are tested before dispatch
5, Varnishing and colour coding is done as per our
customer specification
6. Capacity~1200MT/ annum,
6) Taping & Copper Winding
-
We manufacture Toroidal Cores with Copper Winding for
CT's upto and outer diameter of 1000 mm (V&C) double
fone. Our manufacturing range includes motor class CT,
Protection class CT & PS / PX class CT. The CT's are tested
fon Automatic CT test system (eltel Make). The following
tests are preformed on CT's: Accuracy test, knee point
voltage inter turn test, resistance measurement test,
composite error test, HVtest.
Vikarsh Stampings offers the complete range of CRGO Slit
Coils in sizes ranging from 10 mm upwards and thickness.
ranging from 0.23 mm to 0.35 mm in various Conventional
and HI-B & Domain Refined grades. These are slitted on an
‘automated CNC machine to attain minimum burr on the
slitting edges of the coils. We also manufacturing CRNGO
Slit Coils from 10 mm width and thickness is from 0.35 to
0.65 mmthicker per customer requirement.
We manufacture these products in line with the quality
slandards and norms, per IEC 60404-8-7.
Capacity ~3000 MT/ annum.
7) CRGO Unicores
Wound / Unicores are manufactured for single and three
phase transformers as per customer specification.
Salient Features:
1. Customised Design
2. Compact Construction.
3, NLLarelowerthan stacked core.
4, Lew winding time,
5, Quickassembly.OUR PRODUCTS
8) CRGO Cut-Core
Cut cores are ideally suited where weight or dimensional
requirements are critical and have to be reduced. The
cores are wound from Grain Oriented Silicon Steel Strip
and are annealed in furnace under inert atmosphere. The
impregnation is done in vacuum impregnating equipment
low-stress and high-viscosity resin is being used. Fine
polishing process of cutting surface ensures very good
performance of the cores, having low core loss and high
saturation, We also manufacture 'non standard’ cores as
percustomer specifications.
9) Transformer Reactor Core
We manufacture shunt reactors. Itis used in large reactor
transformers. We offer shunt reactor in built form / full
column as per customers specifications. Also we can
supply cakes as per customer specifications.
Applications:
rt.
i id
Power Transformer Current Transducer Instrument Transformer
Voltage stabilizer and regulator
Ballast Inductors, chokesEQUIPMENTS AT OUR WORKS
Cae uC en aa
+ Cuttolength CNC Machine for cutting of Laminations with maximum 640mm width with
conveyors and automatic stackers.
+ Slitting machines including 2 imported Weybridge Slitting machines with Carbide Cutters,
+ ST(2Nos.), 10T(2Nos.)and 15T(1 No) EOT Cranes,
+ Hydra 15T special purpose forklit, pallet trucks ete
+ Power presses upto 63 Tcapacity total 10 Nos.
+ Special purpose multiholing press with Unipunch holing system,
+ Power Shears, Treadle Shearing Machines from 2 feet width to 13 feet width.
+ PiD controlled Roller Hearth Annealing Furnaces for continuous stress relief annealing of CRGO laminations
and conveyorized continuous annealing furnaces for annealing of toroidal cores.
+ Batch annealing furnace with inert gas arrangements, PLD. controls, etc.
+ NubergNN2 Gas Generator.
+ Taping machine for wound Toroidal Cores.
+ Copper Winding Machine for winding of Toroidal Cores upto 1000 mm OD.
+ Grinding Machines for sharpening of blades, Vnotching, punching tools and cutters.
+ Automatic CNC cutto length machine.
+ Unicore machine.
+ Automatic Toroidal Core winding machine.
+ Manual Toroidal Core winding machine.
TEST EQUIPMENT
+ Calibrated Scales, Verniers, Micrometers, Digital Micrometer.
+ Dialgauges with 1 micron east count.
+ Single sheet core Loss Tester.
+ Epstein squareTesterasperIS 649.
+ Test Bench for testing of all types of toroidal cores.
+ Yokogawa power analyser for various applications including dummy turns testing of Transformer.
Core frames upto 1OMVA,
+ ELTEL make testing equipment for testing of Copper wound Toroidal Cores for various tests like ratioerrortest,
VK test ete. with 4000 amps currentinjection equipment
+ Totaltesting equipment fortesting of toroidal cores ofall grades,1) TOLERENCE CHART FOR CRGO LAMINATIONS
vas Evel sar [ola Ted
THICKNESS + /-0,02 mm, Total difference in thickness in a direction
Perpendicular to rolling direction should not exceed 0.02 mm
LENGTH Upto 700 mm + 0.0 /-0.5 mm
701 to 2000 mm + 0.0 /-1.0 mm
Over 2000 mm +9.0/-1.5 mm.
WIDTH Upto 150mm +0.0/-0.2 mm
151 to 500 mm +0.0 /-0.3 mm
501 mm and above + 0.0/-0.4 mm
CAMBER 0.9 mm max, ona length of 2000 mm per side on surface table
VNoTcH 90 deg + /~5 minutes
MITRED ANGLE 45 deg + /-5 minutes
HOLE DIAMETER + 0.10 /-00 mm
STACKING FACTOR 94.5 % min, for 0.23 mn & 0.20 mm thick material
96 % min. for 0.27 mm and 0.30 mm thick material
96 % min. for 0.35 mm thick material
INSULATION RESISTANCE Min, 10 ohms /em2 as per Franklin method
BURR 10 microns maximum
WEIGHT OF EACH STEP +0.5% TO 1.0% or as per customers requirements,
WATT LOSS / KG As per old AISI and BIS 601 the Watt Loss/Kg is as follows >
M-3 - 0.77 watts/kg atl ST and 50 Hz
M-4 ~ 0.89 watts/kg at 1.5T and 50 Hz
M-5 - 0.97 watts/kg at 1.5T and 50 Hz
M-6 ~ 1.10 watts/kg at 1.5T and 50 Hz
However for the last couple of years the emphasis has shifted {rom the
guaranteed watt loss at 1.5 1/50 Hz to the guaranteed watt loss at 1.7 T/50H2,
Now the watt loss comprises the following in order given as per the
following figures =~
peepee
A B iS
Material Symbol, mills symbol for conventional
high permeability or domain refined grades.
Guaranteed value of iron loss : A value 100 times
L__» the icon oss, ata frequency 50 Hz
and a maximum flux density of 1.7 Tesla
Based on the above we are giving below some International Standards
for magnetic properties.2) TOLERANCE CHART FOR TOROIDAL
CORES
acts Nita ote
OVER mm UPTO mm | TOLERANCE IN mm
“0mm 700 imm
OUTSIDE DIAMETER 100rnm 300 2mm
Above 300 - amm
1D & OD tolerances
can also be achieved as per customers requirements
INSIDE DIAMETER
0.0 mm / +1 MM
WIDTH / HEIGHT UPTO 200MM OD: -0.0/+ 1MM
SLIT BURR. 10 microns,
WEIGHT -0.0 +0.2%6 OF NOMINAL WEIGHT
Grade ATICM @ 1.5T, 50Hz
Ma 027
MAGNETIC CHARACTERISTICS Ma 0.29
MS 0.34
Me 0.40
3) DIMENSIONS AND TOLERANCE OF CRGO
Thickness:
0.18 mm (0.0071 in)
(0.20 mm (0.0079 in), 0.23 mmm (0.0091 in.)
0.27 mm (0.0106 in), 0.30 mmm (0.0118 in)
(0.35 mm (0.0138 in.)
Width (Standard width available
with range)
914 mm (36 in), and 1000 mmm (39 in.)
from 50 mm (2 in), to 1.050 mm (41 in.)
Inside Coil Diameter
508 mm (20 in)
Thickness 0.30 mm (0.0118 in), 0.35 mm (0.0138 in.)
Width 914 mm (36 in), and 1000 mm (39 in.)
Length Length will be available according to negotiation
4) IMPORTANT PHYSICAL PROPERTIES OF CRGO
Density gm/e3 7.65
Silicon content % 3.10
Resistivity micro Ohm-centimeter 48.00
Ultimate Tensile Strength 0° to Rolling Direction Kg/mm2 32.60
Utimate Tensile Strength 90° to Rolling Direction Ka/mm2 38,20
Stacking factor % Mé (27 mm) 96.00
Stacking factor % M5 (.30 mm) 96.50
Stacking factor % M6 (35 mm) 97.00
JIS ¢ 3553,
(ERGO materials come either in the form of coils or sheets. Given below the details of dimensions and tolerances as per5) COMPARATIVE CHART
Toroidal core & C.T manufacturers need to know the B-H values of CRGO Materials after annealing over a wide range of Flux
densities ranging from 100 Gauss to 19000 Gauss. We give below the actual values obtained on a core of size 150 mm OD x
100mmIDx25 mm HT witha stacking factor of 95% and a frequency of 50Hz.
Comparative B-h Curves Tabulated Values For Different Grades Of
CRGO Toroidal Core of Size 150mm Od X 100 mm Id X 25 mm Ht
WS ee
Rego Py ye SSE
aed Crd
AT/CM ATICM AT/CM ATICM
001 0018 0.0035 0.008 0.0038
002 0017 0.0058 0.0043 0.0061
003 0021 0.0081 0.0058 0.0076
0.04 0.023 01 0.0071 0.0094
005 0.026 0012 0.0086 001
006 0.03 0018 001 0012
007 0.032 0017 oon fo
008 0.035 oore 00117 001s
009 0.037 002i O01 002
04 0.061 0023 0.014 0022
02 0.057 044 0.026 0.039
03 0.07 0057 0.038 0053
ou 0.086 007 0.008 0.064
05 0.099 0.082 0.060 0076
06 oan 0.033 0.066 0.086
07 0.123 0.103 0.075 0.094
08 0432 ona 0.083 0104
09 0.146 0.22 0.091 0.133
1 0.16 oat on or
1 0.165 0137 0.104 0.13
12 0475 ons oat 037
13 0.201 0:85 0.4122 0.147
14 0.224 0175 013 0.16
15 0.252 0193 ong 0173
16 03 0216 062 019
17 0.351 0259 0.185 0.21
175 042 0295 021 023
18 0.483 0397 0.26 0262
185 06 0544 036 0338
19 0962 122 0.79 0.62
195 = E = 1356) BIS GRADES & MILL EQUIVALENT GRADES OF ALL MILLS
eee Ca) mn Ore
2308 120 szacr20| wiz0-238 zama [erewo vo] 2aerszo |e iz028
2p 90a | rH 108 |Bz7Ro%0 |wove-27e [27368090 | lorpun os w090-27
amie 964 sz7m09s| os.27 27108095 [2225 erp 00 wos527
ani i10 arene jracn vvoaren ore v20) _a7erv20 warte
2706 10 [erm r20/sz7er20| wiz0-275 27 16 120 27m averia0 er20-27 | w2r-20
27ce 130 [2nwe130|27e130| 130-275 2736 30 13027
goes 130 | 30M5 13 |p30c130| 130-308 | 30/6130} 30ms |20pG130] 30eT130 | 120-20 | Nv30-130
30C6 140 1830¢140 | M140-305 | 3046 140 3or6 140] 30eT 140 | c 140-30
3506 145, B30c145|M150-308 | 3516 145 | 35M |30PG145] 30eT 150 | c 150-35
35C6 155 270185 35J6 155, spo 155| 35er 165 | 165-35.
CERTIFICATE:
s
Certificate
180 14001.2015,INDIAN STANDARDS
IS - 3024: 2015
ANNEX TABLE 1
Magnetic Properties of Conventional Grain Oriented (CGO)
Electrical Steel Tested at 1.7 Tesla and 50 Hz
Nominal eens corn oy
oem Ce eee ey
ree rs enn per
SEC
@ ‘) 0) cy
2acet10 023 1.10 178 0945
2306120 023 120 178 0945
2306127 0.23 127 178 0.945
2706120 027 120 178 0960
2706130 027 1.30 178 0.960
2706140 027 140 175 0.950
30c6130 0.30 1.30 178 0985
3006140 030 140 178 0955
306150 0.30 1.50 175 0955
3500145 035 148 178 0960
3506155 0.35 1.55 178 0.960
356165 0.35 165 175 0960
NOTE : The above samples are sheared longitudinal to the rolling direction and then stress rellef annealed in a neutral or
reducing atmosphere to develop magnetic property at 780" C to 820°C.
ANNEX TABLE 2
Magnetic Properties of High Permeability Grain Oriented
(HPGO) Electrical Steel Tested at 1.7 Tesla and 50Hz
[nn Maximum specific Co Ponta
oes \07/ Core ee
sa er er pec pan
pV
(3) (4) 3)
2)
23HP90 0.23 0.90 185 0.945
23H 9S 023 095 185 0.948
2aHP100 023 1.00 185 0.945
27HP100 027 1.00 185 0.950
27HP110 027 1:10 185 0.950
30HP110 030 1.10 1.85 0.955
‘30HP120 0.30 1.20 185 0.955
a5HP125 035 125 185 0.960
a5HP135 0.35 125 1.85 0.960
NOTE : The above samples are sheared longitudinal to the rolling direction and then stress relief annealed in a neutral or
reducing atmosphere to develop magnetic property at 780°C to 820°C.IEC STANDARDS
IS - 60404 - 8-7 IEC 2008
ANNEX TABLE 1
Technological and magnetic properties of the conventional Grades of grain-oriented mateiral
Pern fin Pee Pet
Shores poorer Sonne
as ee
rrr] Pre)
50 HZ 60HZ 50 HZ 60 HZ
M110-2385 0.23 0.73 0.96 ul 1.45:
M120-2385 0.23 077 1.01 12 157
M120-2755 027 08 1.07 12 1.58
M130-2755 0.27 112 13 168
M130-3085 03 085 1.15 13 un
M140-3085 03 0.92 121 14 1.83
M145-3555 9.35 1.03 1.36 1.45; 191
M155-3555 0.35 1.07 141 1.55 2.06.
ANNEX TABLE 2
Technological and magnetic properties of the high permeability grades of grain-oriented material
Serr Nominal Maximum specific Maximum roy
Thickness Total Loss magnetic stacking
era
OTE
SOHZ sone T
Ma5-29P5 6 023 0.85 12 185 0.948
90-23P5 6 2 09 19 185 0.948
95-225 023 0.95 125 1.85 0.948
M100-23P5 023 1 1.32 1.85 0.945
90-27P5 b 027 09 19 185 0.950
95-2705 027 0.95 125 185 0.950
100-275 027 1 1.32 1.88 0.950
Mit0-27P5 027 1 145 185 0.950
Mi05-30P5 03 1.05 138 185 0.955
Mi10-30P5 03 im 1.46 185 0.955
M120-30P5 03 12 158 185 0.955
115-305 038 15: 151 185 0.960
M125-30P5 0.35 125 1.66 185 0.960
Mi35-30P5 035 1:35 1.7 185 0.960JAPANESE STANDARDS
JIS - C - 2553: 2000
ANNEX TABLE 1
Technological and magnetic properties of regular material.
Parry oon eres ere
See) poner’ poerery
as SEs
(2 C7) Te
50HZ 60 HZ 50HZ 60HZ
120-2385 0.23 077 101 12 187
M127-2385, 0.23 08 1.06 1.27 1.65
130-2785 0.27 0.85 112 13
M140-2785 027 089 117 14
140-3085 03 0.92 121 14
M150-3085, 03 097 1.28 18 1.98
150-3585 0.35 1.05 1.38 15 1.98
M165-3555, 0.35 wa 1.46 1.65 218
ANNEX TABLE 2
Technological and magnetic properties of the high permeability grades of grain-oriented material
Parry Con ees ey
Sree) pcrnierey Dre d
ers H= 800 A/m (3)
(@ Or)
90-235 0.23 09 121 1.85
95-235 023 0.95 125 185
100-235 0.23 1 1az 1.85
M103-27P5 0.27 1.03 135
M110-27°5 0.27 1 145: 185
Mi105-30P5 03 1.05 138 188
i11-30P5 03 1a 1.46 188
M117-30P5 03 147 156 1.85
M125-25P5 0.35 1.25 1.66 1.88
M135-35P5 0.35 1.35 17EUROPEAN STANDARDS
EN - 10107 : 2005 (E)
ANNEX TABLE 1
Technological and magnetic properties of the conventional products
perry Cen ees Maximum Cini
Sere Total Loss Perini Sry
Poe per
Pre) end
50 HZ 60 HZ T
Mito-238 | 1.0863 0.23 073 110 1.78 0.945
120-235 | 1.0864 0.23 077 1.20 1.78 0.945
127-238 | 1.0860 0.23 0.80 1.27 175 0.945
Mi20-27 | 1.0868 027 0.80 1.20 1.78 0.950
130-275 | 1.0866 027 085 1.30 178 0.950
140-275 | 1.0865 027 089 1.40 175 0.950
130-305 | 1.0859 0.30 08s 1.30 1.78 0.955
igo-30s | 1.0862 0.30 092 1.40 178 0.955
miso-30s | 1.0861 0.30 097 1.50 178 0.955
Migo-35s | 1.0858 0.35 1.00 1.40 0.960
is0-35s | 1.0857 0.35 1.05 1.50 0.960
165-258 | 1.0856 0.35 wu 165 178 0.960
ANNEX TABLE 2
Technological and magnetic properties of the high permeability grades of grain-oriented material
erry nes rer Minimum
Len nner Drm
Eyre eras ee factor
Wks
soHZ T
was.2apa | 1.0827 023 0.85 188 0.945
90-238 | 1.0835 0.23 09 188 0.945
w9s-2ap | 1.0836 0.23 0.95 188 0.948
wio0-23° | 1.0879 023 1 185 0.948
wy90-23P8 | 1.0838 027 09 188 0.980
95-278 | 1.0839 027 0.95 1.88 0.950
mioa-27P | 1.088 027 1.03 1.86 0.950
Mtoo-30P8| 1.0852 03 1 1.88 0.955
Mi0s-30P | 1.0886 03 1.05 188 0.955
maii-aop | 1.0881 oa mn 188 055
izs-asp | 1.07854 0.35 1.25 188 0.960AMERICAN STANDARDS AST A - 876 -09
ANNEX TABLE 1
Core - Loss Type Conventional Grain-Oriented Electrical Steel Tested at 15 KG (1.5T) in Accordance with
Test Method A 343/A 343M
ror AM Pete
Loss, C W/lb (W/kg)
one cere}
Type A in (mm) 60HZ 50HZ
186061 0.0070 (0.18) 0.41 (0.90) 0.31 (0.68)
236045 0.0090 (0.23) 0.45 (0.90) 0.34 (0.75)
276051 0.0106 (0.27) 0511.12) 0,39 (0.85)
306058 0.0118 (0.30) 0.58 (1.28) 0.44 (0.97)
356066 0.0138 (0.35) 0.66 (1.46) 0.50 (1.11)
Conventional Grain-Oriented Electrical Steel Tested at 17 KG (1.7 T) in Accordance with Test Method
A343/A 343M
ror AIM ee eo
Loss, C W/lb (W/kg)
eer Srearesy
Type A in (mm) 60HZ 50 HZ
23070 0.0090 (0.23) 0.70 (1.54) 0,53 (1.17)
23H074 0.0106 (0.27) 0.74 (1.63) 0.56 (1.24)
30H083 0.0118 (0.30) 0.83 (1.83) 0.63 (1.39)
35HO94 0.0138 (0.35) 0.96 (1.28) 0.71 (1.57)
High - Permeability Grain-Oriented Electrical Steel Tested at 17 KG (1.7T) in Accordance with
Test Method A 343/A 343M
ror AIM eas
eee ie)
oer Soares
Type A in (nm) 6OHZ 50 HZ
23P060 0.0090 (0.23) 0.60 (1.32) 0.46 (1.01)
270066 0.0106 (0.27) 0.66 (1.46) 0.50 (1.11)
Laser Scribed High - Permeability Grain-Oriented Electrical Steel Tested at 17 KG (1.7T) in
‘Accordance with Test Method A 804/A 804M
ror AIM ee
fete)
Coens Saree
Type A in (mm) 60HZ 50 HZ,
230054 0.0090 (0.23) 0.54 (1.19) 0.41 (0.90)
270087 0.0106 (0.27) 0.87 (1.26) 0.50 (0.96)MAGNETIC PROPERTIES OF CRNGO ELECTRICAL
STEEL TESTED AT 1.5 TESLA 50 HZ AS PER IS 648:2006
Table 1 Desicnatlon or Electrical Steel Grades
(C/auses 4,6.1.3, 7.1.1.2, 7.12.1,7.1.2.41 and 9.2)
Sei ree
COM uC eed (50 Hz) y
al) AE DR Od Car
pia es
(ee
ToT [157-2500 Alm] 5000 A/m| 10000 A/r
The ps pe fs |e [7 3 7 [0 [on
7 | sse250 100 | 280 faa | 10 | a7 | a7 | 2 | 70
| sse270 v0 | a7 [1a | to | 170 | 7 | 2 | 768
asca00 | oss [120 | 300 | 17 | 1s | 170 [17 | 3 | 768
w_ | ase330 130 | 3a0 | say | seo [70 | a7 [3 | 7s
v__| sse3e0 vs | 340 | tay [seo [azo | [3 | 7a
w_| s0ca70 iio | 270 | 149 | 140 | 170 | 17 | 2 | 760
vi | 500090 iis [290 [| 19 | 1a [170 [17 | 2 | 760
va] socato ia [aio | tae | 140 | 170] | 3 | nes
| 500330 135 [330 | 19 | 140 | 170] | 3 | ves
x | soeas0 1s0 [| aso | 180 | 140 | 170 | 12 | 8 | 768
x [S000] |, [ame [400 [rss [ves [as [ [8 770
xi | s0ea7o 200 | 470 | 1s | tea [17% | 10 | 10 | 770
wa] S00520 230 | 530] 1s6 | 10s [178 | 10 | 10 | 770
wav | socéo0 240 | 600 | 157 | 146 [176 | 10 | 10 | 775
ww | 500630 280 | 630 | rss [nes [176 | 10 | 10 | 7975
vei] soc700 300 | 700 | 160 | 109 | 177 | 10 | 10 | 700
wwii | 50800 aa0 | soo [160 | 170 | 178 [10 | 10 | 700
wa] 50330 138 | 330) aa [10] 170) as | 2] 70
nix | 650350 10 | 3s0 | 1a | to | 170 | | 2 | 70
| escu00 170 | 400 [182 | tee | 172 | | 2 | 768
va] 650470 200 | ayo [iss | tes | 17s | 2 | 8 | 708
voir | 650590] ous [230 | 30 | 180 | i | am [12 | 8 | 770
va] 650600 240 | 600 | 186 | tes | 176 | 10 | 10 | 775
raw | 650700 200 | 700 | 1s7 | ser [ave | 10 | 10 | 775
vow | 65800 aa0 | soo | 160 | 170 [178 | 10 | 10 | 700 i
xvi | 6501000 oe Le vo | 10 | 785 e
revit 10001000 aao | 1000 | 158 | tos | 176 | « | 10 | 720 i
vowit froocraoe] "°° [sao [ta00 [160 [170 [178 | « | 10 | 700 i
NG MANUFACTURERS OF TRANSFORMER LAMINATION AND TOROIDAL CORES
VIKARSH Eetal sales @uikashstampings com rivedi@vkarshetampings.com,
STAMPINGSINDIAPVT.LTD, _vharsisanringrayehoncon mut@viartsempingsecm
Pres tah ay Website: worsikarshstampings com