Professional Documents
Culture Documents
Asme N-304-4
Asme N-304-4
Asme N-304-4
N-304-4
CASES OF ASME BOILER AND PRESSURE VESSEL CODE
Case N-304-4 (b) Except for (c) below, plate, sheet, and strip shall
Use of 20Cr-25Ni-6Mo (Alloy UNS N08366) Plate, conform to the requirements of ASTM B 688-81.
Sheet, Strip, and Welded Pipe, Classes 2 and 3 (c) The manufacturer of plate, sheet, and strip mate-
Section III, Division 1 rial shall provide certification as specified in ASTM
B 688-81, 15.1.
Inquiry: Under what rules may 20Cr-25Ni-6Mo (d) This material shall be treated as P-No. 45.
(Alloy UNS N08366) plate, sheet, strip, and welded
(e) The maximum allowable stress values shall be
pipe be used for Section III, Division 1, Class 2 and
those shown in Table 1 of this Case.
3 construction?
(f) For external pressure design, use Fig. VII-1103-2
Reply: It is the opinion of the Committee that of Section III, Division 1.
20Cr-25Ni-6Mo (Alloy UNS N08366) may be used for (g) All other requirements of Section III, Division
Section III, Division 1, Class 2 and 3 construction, 1, for Class 2 or 3 construction, as applicable, shall
provided the requirements of (a) through (h) below be met.
are met. (h) This Case number and revision applied shall be
(a) Welded pipe material shall conform to the require- identified on the Material Manufacturer’s certification
ments of SB-675. for the plate, sheet, strip, or welded pipe material.
TABLE 1
Maximum Allowable Stress Values
Maximum Allowable Stress, ksi
For Metal Temperature Welded Pipe Plate, Strip,
Not Exceeding, °F [Note (1)] and Sheet
100 15.9 18.7
200 12.7 14.9
300 11.3 13.3
400 9.8 11.5
NOTE:
(1) Includes a factor of 0.85 for welded pipes.
489