Professional Documents
Culture Documents
TechnicalDataSheet (TDS) 0103000199393021447975 English 05012007
TechnicalDataSheet (TDS) 0103000199393021447975 English 05012007
TechnicalDataSheet (TDS) 0103000199393021447975 English 05012007
Product Line
Guide
™Trademark of The Dow Chemical Company (Dow) or an affiliated company of Dow.
®
The Industry’s Broadest Range of
Performance and Economic Options
†SYLTHERM Heat Transfer Fluids are manufactured by Dow Corning Corporation and distributed by The Dow Chemical Company.
DOW
™Trad
†SYLT
distr
™Trademark of The Dow Chemical Company (Dow) or an affiliated company of Dow. 1
You
2 †SYLTHERM Heat Transfer Fluids are manufactured by Dow Corning Corporation and distributed by The Dow Chemical Company. Cont
DOWTHERM™ • SYLTHERM† • DOWFROST™ • DOWCAL™
Synth
Ice Rink Cooling
DOW
Inhib
SYLTHERM XLT†
SYLTHERM XLT† Fluid will operate DOWFROST™
as low as -100°C (-150°F) and up to DOWFROST™ Fluid’s recommended
DOWT
SYLTHERM† Silicone 260°C (500°F). This wide operating DOWTHERM,™ use temperature range is -45°C
DOWF
Fluids temperature range makes this DOWFROST,™ and (-50°F) to 120°C (250°F). This
DOWT
silicone fluid especially well-suited
DOWCAL™ Inhibited propylene glycol-based fluid is used
DOWF
SYLTHERM† 800
for single fluid process heating and
Glycol-based Heat in solution with water in food
DOWC
SYLTHERM† 800 Fluid is a highly
cooling (batch processing) systems
Transfer Fluids processing applications. It is also DOWT
stable, long-lasting, silicone fluid DOWC
in the pharmaceutical and fine used in freeze protection of building DOWF
with a recommended operating DOWTHERM™ SR-1
chemical industries. In addition, sprinkler systems where incidental DOWC
This ethylene glycol-based fluid is DOWF
temperature range of -40°C (-40°F)
SYLTHERM XLT Fluid has essentially contact with potable water is
to 400°C (750°F), the broadest range suitable for use in closed-loop,
no odor, is very low in acute oral possible (e.g., when connected by a
of any heat transfer fluid. Operating water-based HVAC, process heating
toxicity, and is not listed as back-flow preventer to a city water
continuously at the upper end of this and cooling, and food industry
reportable in the U.S. under SARA supply), or where state regulations At appro
range, SYLTHERM 800 Fluid exhibits applications operating from -50°C
Title III, Section 313 .
1 require the use of a propylene
low potential for fouling and can (-60°F) to 120°C (250°F). A specially
glycol-based fluid. A specially
often remain in service for 10 years formulated inhibitor package
SYLTHERM† HF formulated industrial inhibitor DOW
or more. The fluid is essentially provides excellent corrosion
SYLTHERM HF Fluid is a specially
† package provides outstanding This p
odorless and is very low in acute protection for common metals. The
formulated silicone polymer corrosion protection. has a
oral toxicity. Silicone heat transfer inhibitor package is easily
designed for use as a low tempe
fluids such as SYLTHERM 800 Fluid maintained, long-lasting, and DOWTHERM™ 4000
temperature, liquid phase heat to 160
are not listed as reportable in the replenishable. That means fluid This ethylene glycol-based fluid
transfer medium. With a similar therm
U.S. under SARA Title III, Section 3131. replacement intervals are extended features the highest maximum use
recommended use temperature where
and long-term fluid costs are temperature of any glycol. Operating
range [-73°C (-100°F) to 260°C maint
reduced. DOWTHERM™ SR-1 Fluid in water-based systems between
(500°F)] as SYLTHERM XLT† Fluid, Speci
Radiant Heating has lasted more than 20 years in -50°C (-60°F) and 175°C (350°F), this
SYLTHERM HF Fluid also offers a provid
properly maintained heat transfer fluid is specially formulated with
closed-cup flash point above 63°C impro
systems. inhibitors to offer greater thermal
(145°F). In addition, SYLTHERM HF prote
stability and corrosion protection.
Fluid has essentially no odor, is very used
The fluid is suitable for thermally
low in acute oral toxicity, and is not HVAC
demanding operations, as well as
listed as reportable in the U.S. under prefe
for applications where long fluid life
SARA Title III, Section 313 .
1
where
and extended maintenance intervals
propy
are desired. The fluid’s wide
coppe
temperature range also makes it
DOW
suitable for single fluid process
propy
heating and cooling.
applic
used
and c
Temperature Range °C
-50 0 50 100 150 200
ded
DOWTHERM SR-1 ™
Ethylene Glycol DOWCAL™ N DOWFROST™ 20 G
DOWFROST™ Propylene Glycol DOWFROST ™ N These fluids are capable of
DOWTHERM™ 4000 Ethylene Glycol Like DOWFROST™ Fluid, DOWCAL™ N operating at higher temperatures
used and DOWFROST™ N Fluids are
DOWFROST™ HD Propylene Glycol than other propylene glycol-based
DOWCAL 10 ™ Ethylene Glycol propylene glycol-based fluids that fluids. They are low in acute oral
so DOWTHERM™ 10
are low in acute oral toxicity and toxicity and may be used in
DOWCAL™ N Propylene Glycol
ding DOWFROST™ N widely used to depress freeze points applications ranging from -45°C
ntal DOWCAL™ 20 G Propylene Glycol
in food and beverage processing and
DOWFROST™ 20 G (-50°F) to 160°C (325°F). A specially
-100 0 100 200 300 400 in other applications between -45°C formulated inhibitor package
by a Temperature Range °F
(-50°F) and 120°C (250°F). They prevents corrosion of common
Optimum Heat Transfer Range
ater Low Temperature Pumpability feature a specially formulated materials of construction (including
ons At appropriate concentrations these fluids will provide burst protection to -73°C (-100°F). corrosion inhibitor package. protection of aluminum components)
in HVAC, food and beverage
processing, and other applications.
DOWFROST™ HD DOWCAL™ 10
This propylene glycol-based fluid DOWTHERM™ 10
has a recommended use DOWCAL™ 10 and DOWTHERM™ 10
temperature range of -45°C (-50°F) Fluids are ethylene glycol-based
to 160°C (325°F). It is suited for fluids with specially formulated
d
thermally demanding applications or inhibitor packages to prevent
use
where long fluid life and extended corrosion of materials commonly
rating
maintenance intervals are desired. used in the construction of water-
en
Specially formulated inhibitors based systems, including aluminum
), this
provide higher reserve alkalinity for components. These fluids are
h
improved long-term corrosion used in HVAC systems to provide
mal Geographic Availablilty of Glycol-based Fluids
protection. Solutions of this fluid are freeze and corrosion protection.
on.
used in closed-loop, water-based They can also be used for freeze
ly
North America
Latin America
Western Europe
Middle East, Africa
Europe, India,
Eastern and Central
Asia-Pacific
untries. ™Trademark of The Dow Chemical Company (Dow) or an affiliated company of Dow.
†SYLTHERM Heat Transfer Fluids are manufactured by Dow Corning Corporation and distributed by The Dow Chemical Company. 7
DOW
1
Properties shown are typical and should not be considered specifications.
2
Properties for Aged fluid except flash point, viscosity.
3
Boiling Point at atmospheric pressure.
a
Properties of fluid as supplied. Properties may differ after extended use.
b
ASTM D2155
™Trademark of The Dow Chemical Company (Dow) or an affiliated company of Dow. ™Trade
8 †SYLTHERM Heat Transfer Fluids are manufactured by Dow Corning Corporation and distributed by The Dow Chemical Company. †SYLT
DOWTHERM™ • SYLTHERM† • DOWFROST™ • DOWCAL™
d Cooling
™Trademark of The Dow Chemical Company (Dow) or an affiliated company of Dow. ™Trade
10 †SYLTHERM Heat Transfer Fluids are manufactured by Dow Corning Corporation and distributed by The Dow Chemical Company. †SYLT
DOWTHERM™ • SYLTHERM† • DOWFROST™ • DOWCAL™
for
es
ously
m
Con
DOW
In most heat transfer applications, and
ethylene glycol-based fluids are your
best choice because of their Sidewalk Snow Melt Systems
™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow. ™Tra
1
You may need to comply with similar or additional legislation in other countries. †SY
12
12 Contact your Dow representative for information. 1
Yo
DOWTHERM™ • SYLTHERM† • DOWFROST™ • DOWCAL™
Sy
Or
Flu
*
P
**
L
F
***
W
™Tr
14 †S
™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow.
DOWTHERM™ • SYLTHERM† • DOWFROST™ • DOWCAL™
Dow fluid specialists can help you • System Design Consultation FLUIDFILE™ Helps You Evaluate
design, operate, and maintain your • Piping Specs and Equipment and Select the Right Fluid
Heat Transfer heat transfer system for optimum Information To streamline and improve the
performance and economy. For • Operational Troubleshooting accuracy of your fluid selection
Assistance From Dow assistance and answers to your • Industrial Hygiene Service process, FLUIDFILE™ provides
™
N complete facts about the entire
ST™ N questions, just contact the Dow • System Leak Detection
representative in your area. • Fluid Consumption Reports family of DOWTHERM,™ DOWFROST,™
Here are just a few of the services • Fluid Analysis and SYLTHERM† Heat Transfer
30)
02) The Full Family of Heat Transfer Fluids
37)
Thermal Stability
High Temperature
Pumpability
Low Temperature
Low Vapor Pressure
Operation Possible
Vapor Phase
Low Viscosity
based Systems
Protection in Water-
Freeze/Corrosion
Long-term Economy
Processing
Operation for Batch
Hot/Cold Cycle
Acute Oral Toxicity***
Performance & Recommended Applications*
7) Fluid Temp.
5) Type Fluid Range,°C** (°F**)
)
DOWTHERM™ A 15 to 400 (60 to 750) ▲ ▲ ▲ ▲ ■
DOWTHERM™ G -7 to 370 (20 to 680) ▲ ■ ▲ ▲ ▲ ■
Synthetic DOWTHERM Q
™
-35 to 330 (-30 to 625) ▲ ● ▲ ▲ ▲ ● ■
Organic DOWTHERM™ RP -4 to 350 (-20 to 660) ▲ ■ ▲ ▲ ▲
Fluids
DOWTHERM™ MX -23 to 330 (-10 to 625) ▲ ● ▲ ▲ ▲ ● ■
DOWTHERM™ T -10 to 288 (14 to 550) ■ ● ▲ ● ●
DOWTHERM™ J -80 to 315 (-110 to 600) ▲ ▲ ▲ ▲ ▲ ▲ ■
SYLTHERM† 800 -40 to 400 (-40 to 750) ▲ ● ▲ ▲ ● ▲
Silicone
Fluids SYLTHERM XLT† -100 to 260 (-150 to 500) ▲ ▲ ■ ▲ ▲ ▲ ▲
™
N SYLTHERM HF -73 to 260 (-100 to 500) ▲ ▲ ■ ▲ ▲ ▲
ST™ N
DOWTHERM™ 4000 -50 to 175 (-60 to 350) ▲ ▲ ▲ ▲ ▲ ● ■
DOWFROST™ HD -45 to 160 (-50 to 325) ▲ ● ● ▲ ▲ ■
Glycol- DOWTHERM™ SR-1 -50 to 121 (-60 to 250) ▲ ▲ ▲ ▲ ▲ ● ■
based
DOWFROST™ -45 to 121 (-50 to 250) ▲ ● ● ▲ ▲ ■ ▲
Fluids
DOWCAL™ 10 -50 to 175 (-60 to 350) ▲ ▲ ▲ ▲ ▲ ● ■
w* DOWTHERM™ 10 -50 to 175 (-60 to 350) ▲ ▲ ▲ ▲ ▲ ● ■
60 DOWCAL™ N -45 to 120 (-50 to 250) ▲ ● ● ▲ ▲ ■ ▲
DOWFROST™ N -45 to 120 (-50 to 250) ▲ ● ● ▲ ▲ ■ ▲
DOWCAL™ 20 G -45 to 160 (-50 to 325) ▲ ● ● ▲ ▲ ■ ▲
DOWFROST™ 20 G -45 to 160 (-50 to 325) ▲ ● ● ▲ ▲ ■ ▲
▲ Outstanding ● Excellent ■ Good
*
Performance within fluid operating range.
**
Liquid phase temperature range. Vapor phase operating range for DOWTHERM™ A Fluid is 257°C (495°F) to 400°C (750°F).
For DOWTHERM™ J Fluid, 181°C (358°F) to 315°C (600°F).
***
When used in industrial applications.
Product Line
Guide
To Learn More, Contact Us:
NOTICE: No freedom from any patent owned by Seller or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change
with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and
disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES
ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
†
SYLTHERM Heat Transfer Fluids are manufactured by Dow Corning Corporation and distributed by The Dow Chemical Company.
Printed in U.S.A.
®
™Trademark of The Dow Chemical Company (Dow) or an affiliated company of Dow. Form No. 176-01419-0507 AMS