Professional Documents
Culture Documents
SN8 - Small Diaphragm-Seal Type Pressure Gauges: Cat - No
SN8 - Small Diaphragm-Seal Type Pressure Gauges: Cat - No
SN8 - Small Diaphragm-Seal Type Pressure Gauges: Cat - No
A04-05-E
SN8_
Small Diaphragm-Seal type
Pressure Gauges
Overview
This pressure gauge is designed for high viscous
pressure measurement with flat pressure receiving
part for various apparatuses.
Features
・Flat pressure sensing part eliminating liquid pool
making cleaning easy.
・Thread or ferrule type can be made depending on
applications.
・Accuracy: ±1.6%F.S.
Main application
Apparatuses relating measurement of Cement milk
pressure feeding, Earth pressure balanced shield,
Sludge and sewage pump monitoring, Waste water
and Slurry process.
Specifications
Item: Performance:
Stem Accuracy:
Dimensions Unit: mm
φ53
φ53
8.5 8.5
(37)
(37)
30×34.6 Hex.
28
2.85
36
24
R3/4
O
20
φ23
φ43.5
3
Diaphragm
φ23 Diaphragm φ50.5
35×40.4 Hex.
28
2.85
39
24
O
R1
20
φ28
φ43.5
3
Diaphragm
φ50.5
φ28 Diaphragm
Model number configuration Please specify the model number, each specs and the range for ordering.
Model
S N 8 S 3 4 G K 2 0
Small Diaphragm-Seal type ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮
Pressure Gauges
Model number Product specifications Additional specifications (Optional)
0 Thread type
Model Y Ferrule type
② S Standard
Connection type
③ 3 Fitting: SUS316
Wetted parts
⑧ 0 Not required
Treatment 1 Use no oil
2 Use no water
3 Use no oil & water
※Specify electrical polish if required.
⑨⑩⑪⑫ GK20 φ50Small pressure gauge (Stem)
Indicator Corresponding model number GK20-W01
※Mounting clamp, nut and gasket are needed to be prepared by (Specify vibration resistant type if required.)
customer. 0 Not required
⑮
※Connecting parts (Mounting clamp, nut and gasket) must be
Documents 1 Required
used within their pressure resistance specification. Ensure the (Documents available upon request)
use within 1MPa which is the most typical maximum pressure Datasheet (Drawing / Specifications)
resistance for mounting clamp available in market unless it is Instruction manual Inspection procedure
customized part. Mill test report
Calibration test report (One-part one sheet)
Inspection / Traceability certificate
*Specify code "X" to refer N/A Attending inspection