Professional Documents
Culture Documents
Filter Press
Filter Press
Filter Press
1 Type of element Polypropylene (PP) Recessed Plate Polypropylene (PP) Recessed Plate Virgin Polypropylene
rate of screw
pump (Excl. GST) 30,500.0 30,500.0
Supervision of commissioning would be charged extra at Rs. 10,000/-. Delivery Period : 4-5 weeks
delivery period not mentioned
DELHI FILTER PRESS & DIFFUSERS
(Manufacturers of water & waste water Equipment’s)
Office & Works: Kh. No. 519, Piau Maniyari Narela Road, Kundli-131028
Contact No: +91-9999902973, 9999198534, 9315376797
Email: delhifilterpress@gmail.com, Website: www.delhifilterpress.com
❖QUOTATION
ef.: DFPD/SE/TN/Q-4210/2024
R 01/06/2024
M/s. Sainath Enviro-Tech
Add:305-C, Sevanthankulam Road, Tuticorin - 628003,TN
Email:kgandhi@sainathenvirotech.com, sainathwater.sales@gmail.com
Dear Sir/Ma’am,
T his is with reference to your valued email dtd. 01/06/2024 regarding your requirement of
Filter Press,andScrewPump.Inthisconnection,asdesiredbyyou,wearepleasedtoencloseherewithour
lowest quotation for the same for your kind consideration and perusal.
Thanking you and looking forward to receiving your valued order at the earliest.
Y ours faithfully,
For Delhi Filter Press & Diffusers
( Anurag)
Mob: +91- 9999902973, +91-9315376797
NOTE:
I. Our scope does not include supply of sludge /air/water piping. Pipe fittings and valves.
II. ur scope does not include any erection /installation /commissioning of equipment’s supplied by us but in case you require our
O
support then we shall charge extra for the same.
III. Our scope does not include any civil work.
IV. Sludge sample is required for selection of cloth otherwise cloth will not have any filtration performance guaranty.
( Anurag)
Mob: +91- 9999902973, +91-9315376797
QUOTATION
To Ref No : HPI/19760/24-25
M/s Sainath Envirotech Date : 12/Jun/2024
Your Ref No : BY MAIL DATED 12/06/2024
Phone : 9497314840
Email : sainathenvirotech98@gmail.com Application : STP
Dear Sir/Madam,
With reference to your enquiry, we are pleased to submit our techno-commercial offer for Filter press for your
kind consideration.
We thank you for your enquiry and assure you our continued service and support. Please do not hesitate to contact
us if you have any further queries.
Yours Sincerely,
AUTHORISED SIGNATORY
Page 1 of 7
QUOTATION
COMMERCIAL ANNEXURE
Sno Description HSN Code Qty Rate (Rs.) Dis (%) Amount (Rs.)
1 Filter press-470-PSC-7 Plates-With Cloth 84211999 1.00 NOS 153,000.00 0.00 153,000.00
Amount in words : One Lakh and Fifty Three Thousand Rupees only TOTAL AMOUNT : 153,000.00
Authorised Signatory
Page 2 of 7
QUOTATION
TECHNICAL ANNEXURE
MODEL
Model : FP-470-PSC
Size : 470 mm x 470 mm
No of plates :7
No of chambers :6
Filtration Area(m2) : 1.81
Cake holding capacity(Liters) : 24.87
Operating Pressure : 7 Bar Max
Plate closing : Electro Hydraulic Closing System
Plate Shifting : Manual
:
PLATE
Type : Recessed
Size : 470 mm x 470 mm
Material : Virgin Polypropylene
Plate thickness : 55± 3mm
Cake thickness : 40± 2 mm
Surface : Pipped buttons with smooth finish
Operating pressure : 7 Bar max
Colour : White/Grey
Number of Stay bosses :4
Feed : Central
Handles : Bolted
Discharge : Single side open
Operating temperature : 70 Deg Max
STRUCTURE
Fixed head : Mild Steel (IS 2062), Fabricated & machined
Hydraulic head : Mild Steel (IS 2062), Fabricated & machined
Tie bars : Mild Steel (IS 2062) Fabricated
Slider head : Mild Steel (IS 2062), machined and hung on slider bracket
Nozzle : MS
Finish : 2 coats of Zinc Primer & 2 coats of epoxy paint blue
Page 3 of 7
QUOTATION
Cloth Sealing : Butterfly type
Filtrate collection : MS Farbicated Launder
FILTER CLOTH
Filter cloth : HP 7022
CAPSTAN CLOSING MECAHNISM
Capstan MOC : Through MS Screw rod mechanism
Additional Items
Additonal :-
Page 4 of 7
QUOTATION
Exclusions (Not Under our scope of supply)
Hope the above information is sufficient for you to proceed further. We expect your valuable orders at the
earliest.
Page 5 of 7
QUOTATION
GENERAL
These Conditions govern all supplies of materials and components from Hydro Press Industries
PRICES
Price shall always be Ex-works, Coimbatore unless and otherwise agreed in written consent in our offer.
DELIVERY
The delivery period will begin only after receipt of technically and commercial clear official purchase
order , receipt of advance and issue of our order acceptance. Delivery period will be mentioned in our
quotation and order acceptance .
PAYMENT TERMS
Shall be as mentioned in our quotation as duly agreed upon.
PACKING
The equipment’s shall be of our standard packing. Any non-standard or special packing requirements like
wooden box , pallets etc.. requested by Buyer will be provided by Hydro Press Industries at additional cost to
Buyer.
CONFIDENTIALITY
The attached techno-commercial document contains proprietary and confidential information and is
submitted under a request and confidential relationship for Design, Manufacture, Supply of Filter press and
its accessories . By accepting this document, the buyer agrees , not to disclose to third parties or use any
drawings, specifications, designs, process or information supplied by Hydro Press Industries, (referred to as
HPI) in any manner detrimental to the interest of HPI.
Page 6 of 7
QUOTATION
WARRANTY
The equipment shall be warranted against any manufacturing defects for a period of 18 months from the
date of our Invoice and 12 months from the date of commissioning whichever is earlier. However, this is not
applicable for consumable spares and damages due to wrong handling, improper maintenance or due to
normal wear & tear. Warrantee is not applicable for electrical, electronic, bought out item, wear and tear
components/parts and rubber parts of all nature.
MATERIAL GUARANTEE
Hydro Press Industries shall not be liable for any consequential losses/damages such as loss of
production, cake moisture etc, since these factors are largely depends on the characteristics of the mother
liquid to be filtered.
INSPECTION
Hydro Press Industries equipment’s are subjected to stringent internal quality control tests and we
guarantee fault free performance. Inspection before dispatch by you are not envisaged to be necessary. If you
still feel inspection is a must and to be carried out at our premises, you can depute your engineers to carry out
inspection at our works before dispatch. If any third party inspection to be carried out, the charges towards
the same shall be borne by the buyer.
Page 7 of 7