Professional Documents
Culture Documents
TA3551ci Charge Roller Replacement
TA3551ci Charge Roller Replacement
TA3551ci Charge Roller Replacement
Procedure
1. Open the front cover.
2. Remove all toner container each.
3. Remove the waste toner box tray by lift-
ing upwards and from the right side.
Figure 1-5-91
Figure 1-5-92
1-5-55
2L6/2N6/2N5/2N4
Figure 1-5-93
1-5-56
2L6/2N6/2N5/2N4
(2) Detaching and refitting the developer unit and drum unit
Procedure
1. Remove the fuser unit (see page 1-5-
68).
2. Pull the transfer belt unit out a little (see
page 1-5-62).
3. Remove the inner unit (see page 1-5-
55).
4. Close the toner supply shutter.
5. Remove two connectors.
Figure 1-5-94
Figure 1-5-95
1-5-57
2L6/2N6/2N5/2N4-4
Figure 1-5-96
Figure 1-5-97
1-5-58
2L6/2N6/2N5/2N4
Procedure
1. Remove the inner unit (see page 1-5-
55).
2. Pull out the charger roller unit by pick-
ing and releasing the MC lock lever.
3. Check or replace the charger roller unit
and refit all the removed parts.
Figure 1-5-98
1-5-59