Solusoft SE1 Liq - e TI

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

_______________________________________________________________________

Technical Information
Solusoft SE1 liq

Solusoft SE 1 liq
Can be applied on all types of fibres like cotton, viscose, modal, tencel, polyamide, polyester and their blends. Imparts a new, characteristically very soft and natural hand to woven and knitted fabrics. The handle can be classified as cool & dry. On blends like polyester/viscose or modal wool-like handle effects can be imitated. On synthetic fabrics a so-called silky-touch (very soft and dry, however) can be achieved. Very good hydrophility, which is wash-permanent. No yellowing of white goods, which are treated with fluorescent brighteners. Flexibility in its application mainly for pad application but can be used also for exhaust processes on machines with low shear forces. Stable together with cross-linkers and catalyst in resin finishing baths. In combination with Cassapret SRHA liq one can achieve finishes on PES and its blends with soil-release properties that are wash-permanent, extremely hydrophilic and allow moisture transport. Silky-touch. Application in the weakly acid area, but stable over a wide pH range. Extra-ordinary process stability. Tested to pH 9. Stable to hard water. Very high suitability for over-printing. Can be over-dyed after prewashing, but pre-trials are recommended for each case. The finishing effects are mostly wash-permanent. Preparation completely free of solvents. Odour free. Is also very well suited for formulations together with other softeners.

Properties
180198.08.02.e

Clariant International Ltd

Appearance Chemical character Ionogenicity Density at 20 C pH-value (25 % emulsion) Further dilutability Compatibility

colourless to weakly yellowish liquid amino-functional nano-silicone cationic ca.1 4,0 4,5 preparations can be further diluted with cold water combinable with virtually all products applied in textile finishing well suited

Suitability for white goods Influence on dyeings : - Shade - Fastness properties - Thermo-migration Storage stability

virtually no influence virtually no influence virtually no influence ca. 6 months. Prolonged storage above 50 has to be C avoided. The product is not sensitive to frost see safety data sheet

Toxicological and ecological data

Application of Solusoft SE1 liq


180198.08.02.e

Clariant International Ltd

Example of a hydrophilic finish on 100% cotton knitwear 10 - 30 10 - 20 pH 5 pad cold with a pick up of approx 75% dry at 120 - 140 C g/l g/l Solusoft SE1 liq Sandolube SVN liq

Example of a hydrophilic finish on PES/Co 10 - 20 10 - 30 pH 5 pad cold with a pick up of approx 65% dry at 120 - 140 C g/l g/l Solusoft SE1 liq Cassapret SRH A liq

Example of a moisture management finish on 100% PES 5 - 15 10 - 30 pH 5 pad cold with a pick up of approx 65% dry at 120 - 140 C g/l g/l Solusoft SE1 liq Cassapret SRH A liq

Many of their dyestuffs, pigments and chemicals are patented by Clariant Ltd or its affiliates in numerous industrial countries. Trademark registered by Clariant Ltd or Clariant GmbH in numerous countries. * Trademark licensed to Clariant Ltd in numerous countries. + Manufacturer's registered trade mark The signs , * and + appear only at the first mention of the product. The information and recommendations presented here were compiled with the utmost care, but cannot be extended to cover every possible case. They are intended to serve as non-binding guidelines and must be adapted to the prevailing conditions.

Clariant International Ltd

180198.08.02.e

You might also like