Professional Documents
Culture Documents
Informe 5
Informe 5
Informe 5
2º ESO B
INTRODUCCIÓN
Hemos hecho un sistema de poleas para hacer subir y bajar un ascensor. Funciona al
mover una manilla y enrollar el hilo que va subiendo el ascensor. Nosotras lo hemos
hecho con cartón y engranajes de decoración.
ABSTRACT
We have made a system of pulleys to raise and lower an elevator. It works by moving a
handle and rolling up the thread that goes up the elevator. We have done it with
cardboard and decoration gears.
METHODOLOGY
We have used cardboard, paint, thread and glue to make this elevator. We have started
making the box where the elevator goes, cutting and gluing the sides. Then we covered it
with paper because it was a little ugly. We have made the pulleys with a compass and we
have crossed them through a wooden stick to make it rotate. Then we did the elevator,
where we put BOB.
DISCUSSION OF RESULTS
1. We have had a problem with the gears. At first we were going to use them by
making them turn between them and collide, but there came a time when it didn't
turn, so we had to use them as decoration.
2. We also had to cover the paint by covering the paper box because it didn't look
good.
3. We had to add weight to the elevator because it didn't come down.
BIBLIOGRAPHY
1
safe=active&client=safari&sca_esv=722f3a8361f4f734&hl=es-es&q=ascensor+con+poleas+
de+cart%C3%B3n+chinito&uds=ADvngMgRhqLryTAGKU-tEzlNhJZtDvFGVJnDCk0WfrkjRE
DtN4ol3cKIAR6ZIY1nItbZdAomyzEogWfZWBLWuSyQ7Q9qjQ7RHlxnRmCwEw8LC4PUGA
U9_9_oaLZNgEpMhHPGFmguAxJT_nuLH-OotvTYFZmCWcxBphVzdrwfDroMZtJ1JL2W_FP
f4kzHjjp5WM8_8
We have taken all the information from our experience doing this project.