Professional Documents
Culture Documents
Prequalification Union Pipes Industry KSA For HDPE Pipes and Fittings As Supplier.
Prequalification Union Pipes Industry KSA For HDPE Pipes and Fittings As Supplier.
Prequalification Union Pipes Industry KSA For HDPE Pipes and Fittings As Supplier.
CLIENT:
ROYAL COMMISSION FOR RIYADH CITY
ENVIRONMENT & INFRASTRUCTURE PLANNING DEPARTMENT
Roundabout No. 3, Al-Kindy Square, Diplomatic Quarter, Riyadh, Saudi Arabia
PROJECT:
ENGINEERING CONTRACTOR
DOCUMENT TITLE: Pre-Qualification Union Pipes Industry KSA for HDPE Pipes and Fittings as
Supplier.
PROJECT NO:
SCALE: DOCUMENT NUMBER: REV: SHEET
12021-G5A 00
TSE Network for Green Riyadh Program
12021
PRE-QUALIFICATION CHECKLIST
The Contractor whenever submitting Pre-Qualification documents for approval that intended to be applied in the project.
Contractor/vendor shall satisfy the following checklist in order to facilitate the reviewing process by ILF/ RCRC.
Vendors/Suppliers /Manufacturer
17 Support Services
Availability of support maintenance services
inside Saudi Arabia / Middle East. ✓
Note:Soft copies shall be segregated in the folders as per the above list.
CONTENTS
1. Profile.....................................................................................................................04-15
2. Valid Commercial Registration Certificate......................................................16-18
3. Valid Chamber of Commerce Registration Certificate...................................19-20
4. Product List and Product Catalogue.................................................................21-46
5. Legal Documents.................................................................................................47-52
a. GOSI...............................................................................................................48
b. Zakat and Tax.................................................................................................49
c. VAT Registration Certificate....................................................................50-51
d. Saudization Certificate..................................................................................52
6. National Address (Local & International)........................................................53-54
7. SASO Certificate (If applicable)........................................................................55-61
8. List of Previous Projects.....................................................................................62-66
9. Previous Client Approvals................................................................................67-141
10. International Certificates................................................................................141-145
11. ITP & NDT Procedure and Forms (If applicable)..............................................146
12. Basic Tender Specification Review..................................................................147-151
13. Material Interchangeability.....................................................................................152
14. Proven Design.........................................................................................................153
15. Manufacturer Experience......................................................................................154
16. Spare Parts Availability.........................................................................................155
17. Support Services......................................................................................................156
18. Organizational Chart........................................................................................157-158
19. Certificate of Origin.........................................................................................159-160
20. Certificate of Warranty...................................................................................161-162
21. Manufacturing Facility Details.......................................................................163-164
22. Quality and HSE Policy...................................................................................165-166
23. Quality Assurance Policy................................................................................167-170
اﻻﺗﺣﺎد ﺻﻧﺎ ﺔ اﻷﻧﺎﺑﯾب ا ﺳ ودﯾﺔ
6OJPO1JQF*OEVTUSZ,4"
( 1SPGJMF
·.'.'.!Lilli
ii.clitil :Ji.:U!JI
iiMJ.sz.110:,100!1)
Union Pipes Industry (Saudi Arabia)
-
----
�
- ----
- - _,,
,_.
--- --
_.-,
-1· 7
The standard lengths of the pipes are 12, 18 and 24 meters. However we can supply any length on
customer request. Small diameter pipes from 16mm to 110mm can be supplied in coils from 100 to
500 meters.
Pipes with special diameters and thickness can be manufactured for different uses such as re-lining
of oil pipes and industrial applications.
Our pipe production is according to the international standards ISO 4427 and ISO 4437.
02 03
PE Pressure Pipe Uses: PE Pressure Pipe Advantages:
Potable water
Irrigation 50 year design life Flexible
Sewerage : new / relining Resistant to corrosion Long lengths
Storm water Chemically inert Narrow trench
Industrial piping Welded joints Absorbs surge
Desalination Very smooth Does not fatigue
Petrochemical Light Available in coils
Nuclear Durable Non-destructive methods
Chilled / cooling water Non-polluting Relining
Fire water mains Resists UV attack Abrasion resistant
Gas distribution Non-toxic Locally available
Crude oil low lines & liners No anchor blocks Fittings available locally
Dredging and slurry pipelines
Underwater piping Intakes & Outfalls
04 05
Polypropylene (PP) & Polyethylene (PE) Gravity Pipes
UPI manufactures Spiral Wound Gravity Pipes by using Bauku technology to produce these
huge pipes for sea-water projects. The material and manufacturing technology can in fact be
used to manufacture any diameter of gravity pipe up to 3500mm.
Applications include seawater intake and outfalls, storm water drainage, sewerage and
industrial applications. Manholes and tanks can also be fabricated to particular requirements.
06 07
Corrugated Pipes PE & PP Fittings Fabrication
UPI has introduced twin walled pipes to their range. Using UNICOR technology UPI can now UPI fabricates PE & PP ittings to International Standards or other speciications to meet the
manufacture corrugated pipe in HDPE and PP up to 315mm dia. speciic demands of the customer.
Such pipes include: Fabricated ittings are suitable for both butt-fusion and electro- fusion joints.
PP and HDPE sewerage / drainage pipes to EN 13476-3 UPI also supplies related ittings such as electro-fusion couplers, saddles and mechanical
Coilable HDPE cable conduit t to EN 50086 -2-4 ittings to provide a complete guaranteed system.
Corrugated Pipes PE and PP Uses: Corrugated Pipe Advantages: The size range of the fabricated PE ittings are from 50mm to 2000mm. Specially
conigured ittings are also manufactured according to the customers’ requirement. UPI
also fabricates PP ittings, Manholes, Silos & Tanks.
Drainage pipes to EN 13476-3 Single or twin wall construction A rigorous test program ensures consistent quality for our fabricated ittings.
Sewerage PP for stiffness
Stormwater drainage HDPE for lexibility
Industrial discharge Continuous pipe lengths in coils
Land drainage Welded or push it connections
0 8 09
Quality, Health, Safety & Environment Commitment Health & Safety
UPI’s resident HSE team is dedicated to eliminating hazards and reducing associated
UPI’s Integrated Management System is designed to continuously improve quality, risk to a level as low as reasonably practicable.
prevent injury and ill-health at the workplace and prevent environmental pollution. UPI is certiied as complying with OHSAS 18001:2007.
10 11
Technical Support Site Services:
UPI’s experienced professional staff can provide comprehensive UPI has established a full range of site services which can be tailored to suit the requirements of
technical support regarding: the Client and the Project.
Material selection UPI has a wide range of site welding, installation and testing machinery covering all pipe sizes
Design criteria; methods and Standards from 63mm to 3000mm diameter.
Application of Speciications and Standards
Pipe selection and approvals
Jointing techniques Contract Options Include:
Selection of ittings and ixings
Installation techniques Supply of pipe and ittings only + technical support
Testing methods Supply of pipe and ittings + welding supervision
Supply of pipe and ittings + welders and welding machines
UPI maintains a comprehensive technical reference library which Weld and welder testing
includes most relevant current International Standards. Supply and Installation of pipes and ittings, including testing
Full EPC Contract Service
Customer Service
UPI has invested in staff recruitment and training to provide unrivalled customer care and
support.
UPI’s customers are assured of the company’s full support in all aspects of plastics pipeline
technology from pipe selection and design through installation and testing.
Each production run is tailored to our customer’s requirements and pipe lengths can be adjusted
to maximize transport and installation eficiencies.
12 13
Major Projects
Irrigation Mains in Abu Sewage Rising Mains in Borouge 2 Project, Ruwais Occidental Petroleum, Qatar Abu Dhabi Corniche Desalination Plant for DEWA
Dhabi Industrial City Mafraq Client: TecnicasReunidas
Development Client: DEWA
Client: APS
Client: ADSSC Project: Borouge 2 Cooling Water Project: Efluent Water Line Project: Desalination Plant in
Client: ADSSC Client: Abu Dhabi Municipality
Project: Irrigation Mains 1600mm diameter PN6 630mm diameter PN22 Jabel Ali, 30 Million Gallons Daily
Project: Sewage Rising Mains Project: Corniche Development,
900mm diameter PN10 Material: HDPE Material: HDPE Material: HDPE Pipes & Fittings
630mm diameter PN16 Surface Water Drainage
Material: HDPE Total Length: 26kms Total Length: 6kms Scope: Supply of pipes, welders,
Material: HDPE 1200mm diameter PN10
Total Length: 9kms Scope: Supply, install, weld and Scope: Supply of pipes and ittings welding machinery
Total Length: 72kms Material: HDPE
Scope: Supply of pipes, welders, test
Scope: Supply of pipes, welders, Total Length: 10kms
welding machinery welding machinery Scope: Supply of pipes, welders,
welding machinery
14 15
HDPE Water Pipes as per ISO - 4427, PE 100, HDPE Gas Pipes as per ISO - 4437, PE 100,
Design Stress 8.0 Mpa Design Stress 5.0 Mpa
Wall Series
Size
S-12.5 (SDR 26) S-8 (SDR 17) S-5 (SDR 11) S-4 (SDR 9)
Wall Series
Designation Size
Nominal Pressures Designation
S-12.5 (SDR 26) S-8 (SDR 17) S-5 (SDR 11) S-4 (SDR 9)
DN
PN 6.3 PN 10 PN 16 PN 20 DN Nominal Pressures
de e di e di e di e di PN 3.9 PN 6.3 PN 10 PN 12
kg/m kg/m kg/m kg/m de e di e di e di e di
mm mm mm mm mm mm mm mm mm
kg/m kg/m kg/m kg/m
mm mm mm mm mm mm mm mm mm
16 - - - - - - - - - 2.0 12.0 0.10
16 - - - - - - - - - 2.0 12.0 0.10
20 - - - - - - 2.0 16.0 0.12 2.3 15.4 0.14
20 - - - - - - 2.0 16.0 0.12 2.3 15.4 0.14
25 - - - - - - 2.3 20.4 0.18 3.0 19.0 0.22
25 - - - - - - 2.3 20.4 0.18 3.0 19.0 0.22
32 - - - 2.0 28.0 0.20 3.0 26.2 0.29 3.6 24.8 0.34
32 - - - 2.0 28.0 0.20 3.0 26.2 0.29 3.6 24.8 0.34
40 - - - 2.4 35.2 0.31 3.7 32.6 0.45 4.5 31.0 0.53
40 - - - 2.4 35.2 0.31 3.7 32.6 0.45 4.5 31.0 0.53
50 2.0 46.0 0.32 3.0 44.0 0.47 4.6 40.8 0.69 5.6 38.8 0.82
50 2.0 46.0 0.32 3.0 44.0 0.47 4.6 40.8 0.69 5.6 38.8 0.82
63 2.5 58.0 0.48 3.8 55.4 0.75 5.8 51.4 1.09 7.1 48.8 1.30
63 2.5 58.0 0.48 3.8 55.4 0.75 5.8 51.4 1.09 7.1 48.8 1.30
75 2.9 69.2 0.69 4.5 66.0 1.05 6.8 61.4 1.53 8.4 58.2 1.83
75 2.9 69.2 0.69 4.5 66.0 1.05 6.8 61.4 1.53 8.4 58.2 1.83
90 3.5 83.0 0.99 5.4 79.2 1.52 8.2 73.6 2.20 10.1 69.8 2.64
90 3.5 83.0 0.99 5.4 79.2 1.52 8.2 73.6 2.20 10.1 69.8 2.64
110 4.2 101.6 1.45 6.6 96.8 2.24 10.0 90.0 3.26 12.3 85.4 3.91
110 4.2 101.6 1.45 6.6 96.8 2.24 10.0 90.0 3.26 12.3 85.4 3.91
125 4.8 115.4 1.87 7.4 110.2 2.87 11.4 102.2 4.23 14.0 97.0 5.05
125 4.8 115.4 1.87 7.4 110.2 2.87 11.4 102.2 4.23 14.0 97.0 5.05
140 5.4 129.2 2.36 8.3 123.4 3.59 12.7 114.6 5.26 15.7 108.6 6.34
160 6.2 147.6 3.09 9.5 141.0 4.69 14.6 130.8 6.91 17.9 124.2 8.25 140 5.4 129.2 2.36 8.3 123.4 3.59 12.7 114.6 5.26 15.7 108.6 6.34
160 6.2 147.6 3.09 9.5 141.0 4.69 14.6 130.8 6.91 17.9 124.2 8.25
180 6.9 166.2 3.85 10.7 158.6 5.92 16.4 147.2 8.73 20.1 139.8 10.40
200 7.7 184.6 4.77 11.9 176.2 7.31 18.2 163.6 10.80 22.4 155.2 12.90 180 6.9 166.2 3.85 10.7 158.6 5.92 16.4 147.2 8.73 20.1 139.8 10.40
225 8.6 207.8 5.99 13.4 198.2 9.28 20.5 184.4 13.60 25.2 174.6 16.30 200 7.7 184.6 4.77 11.9 176.2 7.31 18.2 163.6 10.80 22.4 155.2 12.90
250 9.6 230.8 7.41 14.8 220.4 11.40 22.7 204.6 16.70 27.9 194.2 20.10 225 8.6 207.8 5.99 13.4 198.2 9.28 20.5 184.4 13.60 25.2 174.6 16.30
280 10.7 258.6 9.24 16.6 246.8 14.30 25.4 229.2 21.00 31.3 217.4 25.10 250 9.6 230.8 7.41 14.8 220.4 11.40 22.7 204.6 16.70 27.9 194.2 20.10
315 12.1 290.8 11.80 18.7 277.6 18.00 28.6 257.8 26.60 35.2 244.6 31.70 280 10.7 258.6 9.24 16.6 246.8 14.30 25.4 229.2 21.00 31.3 217.4 25.10
355 13.6 327.8 14.90 21.1 312.8 23.00 32.2 290.6 33.70 39.7 275.6 40.30 315 12.1 290.8 11.80 18.7 277.6 18.00 28.6 257.8 26.60 35.2 244.6 31.70
400 15.3 369.4 18.80 23.7 352.6 29.00 36.3 327.4 42.80 44.7 310.6 51.20 355 13.6 327.8 14.90 21.1 312.8 23.00 32.2 290.6 33.70 39.7 275.6 40.30
450 17.2 415.6 24.30 26.7 396.6 36.80 40.9 368.2 54.30 50.3 349.4 64.70 400 15.3 369.4 18.80 23.7 352.6 29.00 36.3 327.4 42.80 44.7 310.6 51.20
500 19.1 461.8 30.00 29.7 440.6 45.30 45.4 409.2 66.90 55.8 388.4 79.90 450 17.2 415.6 24.30 26.7 396.6 36.80 40.9 368.2 54.30 50.3 349.4 64.70
560 21.4 517.2 37.70 33.2 493.6 56.90 50.8 458.4 83.80 62.5 435.0 97.00 500 19.1 461.8 30.00 29.7 440.6 45.30 45.4 409.2 66.90 55.8 388.4 79.90
630 24.1 581.8 47.70 37.4 555.2 71.90 57.2 515.6 106.00 70.5 489.0 126.00
560 21.4 517.2 37.70 33.2 493.6 56.90 50.8 458.4 83.80 62.5 435.0 97.00
710 27.2 655.6 60.50 42.1 625.8 91.40 64.5 581.0 133.9 - - -
630 24.1 581.8 47.70 37.4 555.2 71.90 57.2 515.6 106.00 70.5 489.0 126.00
800 30.6 738.8 76.70 47.4 705.2 116.00 72.6 654.8 170.1 - - -
710 27.2 655.6 60.50 42.1 625.8 91.40 64.5 581.0 133.9 - - -
900 34.4 831.2 97.00 53.3 793.4 147.00 81.7 736.6 215.2 - - -
800 30.6 738.8 76.70 47.4 705.2 116.00 72.6 654.8 170.1 - - -
1000 38.2 923.6 120.00 59.3 881.4 181.00 90.2 819.6 265.7 - - -
900 34.4 831.2 97.00 53.3 793.4 147.00 81.7 736.6 215.2 - - -
1200 45.9 1108.2 172.00 67.9 1064.2 256.04 - - - - - -
1400 53.5 1293.0 234.00 82.4 1235.0 348.00 - - - - - - 1000 38.2 923.6 120.00 59.3 881.4 181.00 90.2 819.6 265.7 - - -
1600 61.2 1477.6 306.00 94.1 1411.0 453.00 - - - - - - 1200 45.9 1108.2 172.00 67.9 1064.2 256.04 - - - - - -
1800 69.1 1661.8 392 105.9 1588.2 587 - - - - - - 1400 53.5 1293.0 234.00 82.4 1235.0 348.00 - - - - - -
1600 61.2 1477.6 306.00 94.1 1411.0 453.00 - - - - - -
2000 76.9 1846.2 485 117.6 1764.8 724 - - - - - -
d1 SDR - 11 SDR - 17
Pipe Z 10 BAR Z 16 BAR
s d3 d4 z h1 h3 s d3 d4 z h1 h3
Size DI A F Thick No. of DI A F Thick No. of mm mm mm mm mm mm mm mm mm mm mm mm mm
mm mm mm mm Dia. mm Holes mm mm mm Dia. mm Holes 20 2.0 27.0 45.0 50.0 7.0 30.0 - - - - - -
50 165 66 125 18 16 4 165 66 125 18 16 4 25 2.3 33.0 58.0 50.0 9.0 28.0 - - - - - -
63 185 78 145 18 16 4 185 78 145 18 16 4 32 3.0 40.0 68.0 50.0 10.0 27.0 - - - - - -
75 200 90 160 18 16 8 200 90 160 18 16 8 40 3.7 50.0 78.0 50.0 11.0 24.0 - - - - - -
50 4.6 61.0 88.0 50.0 12.0 23.0 3.0 61.0 88.0 50.0 12.0 23.0
90 200 110 160 18 16 8 200 110 160 18 16 8
63 5.8 75.0 102.0 50.0 14.0 16.0 3.8 75.0 102.0 50.0 14.0 16.0
110 220 128 180 18 16 8 220 128 180 18 16 8
75 6.9 89.0 122.0 50.0 16.0 14.0 4.5 89.0 122.0 50.0 16.0 14.0
125 250 135 210 18 16 8 250 135 210 18 16 8 90 8.2 105.0 138.0 80.0 17.0 43.0 5.4 105.0 138.0 80.0 17.0 43.0
140 285 158 210 22 16 8 285 158 210 22 16 8 110 10.0 125.0 158.0 80.0 18.0 37.0 6.6 125.0 158.0 80.0 18.0 37.0
160 285 178 240 22 16 8 285 178 240 22 16 8 125 11.4 132.0 158.0 80.0 25.0 35.0 7.4 132.0 158.0 80.0 18.0 42.0
180 285 188 240 22 17 8 285 188 240 22 17 8 140 12.8 155.0 188.0 80.0 25.0 27.0 8.3 155.0 188.0 80.0 18.0 34.0
200 340 235 295 22 17 8 340 235 295 22 17 12 160 14.6 175.0 212.0 80.0 25.0 27.0 9.5 175.0 212.0 80.0 18.0 34.0
180 16.4 180.0 212.0 80.0 30.0 20.0 10.7 180.0 212.0 80.0 20.0 30.0
225 340 238 295 22 19 8 340 238 295 22 19 12
200 18.2 232.0 268.0 100.0 32.0 28.0 11.9 232.0 268.0 100.0 24.0 36.0
250 395 288 350 22 19 12 405 288 355 26 19 12
225 20.5 235.0 268.0 100.0 32.0 38.0 13.4 235.0 268.0 100.0 24.0 46.0
280 395 294 350 22 21 12 405 294 355 26 21 12 250 22.8 285.0 320.0 100.0 35.0 25.0 14.8 285.0 320.0 100.0 25.0 35.0
315 445 338 400 22 21 12 460 338 410 26 21 12 280 25.5 291.0 320.0 100.0 35.0 35.0 16.6 291.0 320.0 100.0 25.0 45.0
355 505 376 460 22 23 16 520 376 470 26 23 16 315 28.7 335.0 370.0 100.0 35.0 25.0 18.7 335.0 370.0 100.0 25.0 35.0
355 32.3 373.0 430.0 120.0 40.0 40.0 21.1 373.0 430.0 120.0 30.0 50.0
400 565 430 515 26 24 16 580 430 525 30 24 16
400 36.4 427.0 482.0 120.0 46.0 29.0 23.7 427.0 482.0 120.0 33.0 42.0
450 615 520 565 26 26 20 640 520 585 30 26 20
450 41.0 500.0 550.0 130.0 60.0 10.0 26.7 500.0 550.0 120.0 46.0 14.0
500 670 533 620 26 28 20 715 533 650 33 28 20 500 45.5 530.0 585.0 120.0 60.0 10.0 29.7 530.0 585.0 120.0 46.0 24.0
560 780 600 725 30 28 20 840 600 770 36 28 20 560 51.0 615.0 685.0 130.0 60.0 10.0 33.2 615.0 685.0 120.0 50.0 10.0
630 780 650 725 30 31 20 840 650 770 36 31 20 630 57.3 642.0 685.0 120.0 60.0 20.0 37.4 642.0 685.0 120.0 50.0 30.0
710 895 743 840 30 35 24 910 743 840 36 35 24 710 - - - - - - 42.1 737.0 800.0 120.0 50.0 20.0
800 1015 845 950 33 38 24 1025 845 950 39 38 24 800 - - - - - - 47.4 840.0 905.0 120.0 52.0 18.0
900 1115 947 1050 33 42 28 1125 947 1050 39 42 28 900 - - - - - - 53.3 944.0 1005.0 120.0 55.0 15.0
1000 1230 1050 1160 36 45 28 1255 1050 1170 42 45 28 1000 - - - - - - 59.3 1047.0 1110.0 140.0 60.0 10.0
1200 1455 1260 1380 39 52 32 1485 1260 1390 48 52 32 1200 - - - - - - 70.6 1245.0 1330.0 170.0 70.0 70.0
1400 1675 1470 1590 42 55 36 1685 1470 1590 48 55 36 1800 - - - - - - 105.9 1850 1970 230 130 40
1600 1915 1680 1820 48 60 40 1930 1680 1820 56 60 40 2000 - - - - - - 117.6 2050 2200 250 150 40
18 19
EQUAL TEE
BENDS
mm mm mm Min. Max. Min. Max. mm mm mm mm mm mm mm mm 75 75 75.7 4.5 5.2 6.8 7.9 150 400 200 75
90 90 90.9 5.4 6.3 8.2 9.5 135 315 245 218 194 194 90 90 90 90.9 5.4 6.3 8.2 9.5 150 410 205 90
110 110 111.0 6.6 7.6 10.0 11.5 165 315 245 218 194 194 110 110 110 111.0 6.6 7.6 10.0 11.5 150 410 205 110
125 125 126.2 7.4 8.6 11.4 13.2 188 338 258 228 200 200 125 125 125 126.2 7.4 8.6 11.4 13.2 150 430 215 125
140 140 141.3 8.3 9.6 12.7 14.7 210 360 271 237 206 206 140 140 140 141.3 8.3 9.6 12.7 14.7 150 440 220 140
150
160 160 161.5 9.5 11.0 14.6 16.8 240 390 288 249 214 214 160 160 160 161.5 9.5 11.0 14.6 16.8 150 460 230 160
180 180 181.7 10.7 12.4 16.4 19.6 270 420 305 262 222 222 180 180 180 181.7 10.7 12.4 16.4 19.6 150 480 240 180
200 200 201.8 11.9 13.7 18.2 21.8 300 450 323 274 230 230 200 200 200 201.8 11.9 13.7 18.2 21.8 150 500 250 200
225 225 227.1 13.4 15.5 20.5 24.5 338 488 345 290 241 241 225 225 225 227.1 13.4 15.5 20.5 24.5 150 530 265 225
250 250 252.3 14.8 17.1 22.7 27.2 375 625 466 412 350 350 250 250 250 252.3 14.8 17.1 22.7 27.2 250 750 375 250
250
280 280 282.6 16.6 19.9 25.4 30.4 420 670 492 424 362 362 280 280 280 282.6 16.6 19.9 25.4 30.4 250 780 390 280
315 315 317.9 18.7 22.4 28.6 34.3 473 773 576 498 428 428 315 315 315 317.9 18.7 22.4 28.6 34.3 340 1000 500 315
355 355 358.2 21.1 25.3 32.2 38.6 533 833 608 520 443 443 355 355 355 358.2 21.1 25.3 32.2 38.6 375 1300 650 355
300
400 400 403.6 23.7 28.4 36.3 43.5 600 900 646 548 461 461 400 400 400 403.6 23.7 28.4 36.3 43.5 450 1400 700 400
450 450 454.1 26.7 32.0 40.9 49.0 675 975 689 580 481 481 450 450 450 454.1 26.7 32.0 40.9 49.0 475 1500 750 450
500 500 504.5 29.7 35.6 45.4 54.4 750 1100 783 665 551 551 500 500 500 504.5 29.7 35.6 45.4 54.4 530 1560 780 500
560 560 565.0 33.2 39.8 50.8 60.7 840 1190 835 698 575 575 560 560 560 565.0 33.2 39.8 50.8 60.7 520 1600 800 560
630 630 635.7 37.4 44.8 57.2 67.1 350 945 1295 896 741 603 603 630 630 630 635.7 37.4 44.8 57.2 67.1 585 1800 900 630
710 710 716.4 42.1 50.5 64.6 76.9 1065 1415 965 792 636 636 710 710 710 716.4 42.1 50.5 64.6 76.9 595 1900 950 710
800 800 807.2 47.4 56.8 72.8 86.7 1200 1550 1043 847 672 672 800 800 800 807.2 47.4 56.8 72.8 86.7 600 2000 1000 800
900 900 908.1 53.3 63.2 81.9 97.5 1350 1750 1179 960 762 762 900 900 900 908.1 53.3 63.2 81.9 97.5 650 2200 1100 900
1000 1000 1009.0 59.3 69.2 91.0 108.3 1500 1900 1266 1022 802 802 1000 1000 1000 1009.0 59.3 69.2 91.0 108.3 700 2400 1200 1000
1200 1200 1210.0 70.6 80.5 109.1 129.9 400 1800 2100 1400 1200 900 900 1200 1200 1200 1210.0 70.6 80.5 109.1 129.9 950 3100 1550 1200
1400 1400 1412.6 82.4 98.1 127.3 151.5 2100 2500 1650 1440 1200 1200 1400 1400 1400 1412.6 82.4 98.1 127.3 151.5 1050 3500 1820 1400
1600 1600 1614.0 94.2 112.1 145.5 173.2 2400 3100 1400 1670 1450 1450 1600 1600 1600 1614.0 94.2 112.1 145.5 173.2 1200 4000 2080 1600
1800 1800 1816.2 105.9 116.6 - - 600 2700 3300 2160 1730 1330 1130 1800
2000 2000 2018 117.6 129.5 - - 1600 5000 2600 2000
2000 2000 2018 117.6 129.5 - - 750 3000 3750 2490 2000 1560 1340 2000
20 2 1
Commercial Registration
˽˿˹˻˹˹˽˺˾˺
˰ϫ˺˽˼˽˹˽˻˼
̀˹˹˺̀˾̀́̂˻
ΓΩϭΩΣϣϟΏϳΑΎϧϻΔϋΎϧλϟΩΎΣΗϻΔϛέη
ϯΩϭό˰˰˰˰γ ϲΟϳϠΧϝΎϣαέΑΓΩϭΩΣϣ
˰ϫ˺˾˼˼˹˽˻˼ ˰ϫ˺˽˼˽˹˽˻˼ Δϧγ̂̂
ΔϳΩΎλΗϗϻௌΩΑϋϙϠϣϟΔϧϳΩϣώΑέ
˿˺˽˿˿˿˿ ˻˺˽˼˺ ˺˼˼˹
ϱέΎΟΗϟίϣέϟγϣ˯ΎΟέϟΔρηϧϷΕΎϧΎϳΑϰϠϋωϼρϼϟ
ϱΩϭόγ்˻˹˹˹˹˹˹˹
ϲϓέηϟΩϣΣϥϣΣέϟΩΑϋϡγΎϗ ϱΩΎϣΣϟ˯ΎϓέηϟΩϣΣϣϲϠϋΩϣΣϣ
ϲΎγϳόϟέϣϋΩϣΣϟΎλ
ΔϛέηϟΩϘϋϪϳϠϋιϧΎϣΏγΣ
ώΑέ ώΑέ
˰ϫ˺˽˽˼˹˻˹̀ ́˿˻˻̀˻˹˽ ˰ϫ˺˽˽˾˹˽˹̀
ΩΎϣΣϟϡϳϫέΑϥΑϥγΣϣϟΩΑϋ
ΓΩϭΩΣϣϟΏϳΑΎϧϻΔϋΎϧλϟΩΎΣΗϻΔϛέη
̀˹˹˺̀˾̀́̂˻
˽˿˹˻˹˹˽˺˾˺
˺˿̂́˹̂
˼˺˼˹́̀˼˹˺˺́
˼˹˺˹˹˻̂́˺˽
**ϝϳΟγΗϟϡΗϳϡϟ
˺́˹̀̀˻
ΩΟϭϳϻ
((920000667)) ϡϗέϟϰϠϋϝΎλΗϻίϛέϣϊϣϝλϭΗϟϭΟέˬΔϬΟϟϯΩϟϡϛΗηϧϣϝϳΟγΗϲϓϝϠΧϙΎϧϫ**
Chamber of Commerce
Product Cataloge
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Government Certificates
١٤٤٤/١٢/٠٦ ﺍﻟﺘﺎﺭﻳﺦ
٢٤/٠٦/٢٠٢٣ ﺍﻟﻤﻮﺍﻓﻖ
ﺭﻣﺰ ﺍﻟﺸﻬﺎﺩﺓ ٥٥٥٤٠٤٦٤
ﺷﻬﺎﺩﺓ
ﺍﻟﺴﻌﻮﺩﻳﺔ
٥٠٦٢٠٨٤٩١ ﺭﻗﻢ ﺍﻹﺷﺘﺮﺍﻙ :
ﻣﺼﺪﺭﻩ : ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ٤٦٠٢٠٠٤١٥١ :
ﻛﺘﺎﺑﺔ ﺭﻗﻤﺎ
ﺛﻼﺛﻮﻥ ﻣﺸﺘﺮﻛﺎ ٣٠ ﻋﺪﺩ ﺍﻟﻤﺸﺘﺮﻛﻴﻦ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ
ﺃﺭﺑﻌﻪ ﻭ ﺛﻤﺎﻧﻮﻥ ﻣﺸﺘﺮﻛﺎ ٨٤ ﻋﺪﺩ ﺍﻟﻤﺸﺘﺮﻛﻴﻦ ﻏﻴﺮ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ
ﻣـﺎﺋﺔ ﻭ ﺍﺭﺑﻌﺔ ﻋﺸﺮﻩ ﻣﺸﺘﺮﻛﺎ ١١٤ ﺍﻟﻤﺠﻤﻮﻉ
ﺗﺸﻬﺪ ﺍﻟﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻹﺟﺘﻤﺎﻋﻴﺔ ﺑﺄﻥ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺃﻋﻼﻩ ﻗﺪ ﺃﻭﻓﺖ ﺑﺈﻟﺘﺰﺍﻣﺎﺗﻬﺎ ﺗﺠﺎﻩ ﺍﻟﻤﺆﺳﺴﺔ
ﻭﻓﻖ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻤﻘﺪﻣﺔ ﻣﻨﻬﺎ ﺣﺘﻰ ﺗﺎﺭﻳﺦ ﺇﺻﺪﺍﺭ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ،ﻭﺍﻟﺘﻲ ﺗﻢ ﻣﻨﺤﻬﺎ ﻟﺘﻘﺪﻳﻤﻬﺎ ﻷﻳﺔ ﺟﻬﺔ ﺗﻄﻠﺒﻬﺎ ،ﻭﻫﻲ
ﺻﺎﻟﺤﺔ ﻟﺠﻤﻴﻊ ﺍﻷﻏﺮﺍﺽ ﺍﻟﺘﻲ ﻧﺺ ﻋﻠﻴﻬﺎ ﻧﻈﺎﻡ ﺍﻟﺘﺄﻣﻴﻨﺎﺕ ﺍﻹﺟﺘﻤﺎﻋﻴﺔ ﻓﻲ ﺍﻟﻤﺎﺩﺓ ) (١٩/٦ﻣﻨﻪ.
ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﺳﺎﺭﻳﺔ ﺍﻟﻤﻔﻌﻮﻝ ﺣﺘﻰ ١٤٤٥/٠١/٠٥ﻫـ.
ﻋﻦ ﻃﺮﻳﻖ ﺍﺳﺘﺨﺪﺍﻡ ﺃﻭ ﻳﻠﺰﻡ ﺍﻟﺘﺤﻘﻖ ﻣﻦ ﺻﺤﺔ ﻭﺻﻼﺣﻴﺔ ﺍﻟﺸﻬﺎﺩﺓ ﻋﺒﺮ ﺯﻳﺎﺭﺓ ﺍﻟﺮﺍﺑﻂ
ﺍﻟﺮﻣﺰ ﺍﻟﻤﻌﺮﻑ ﺍﻟﺘﺎﻟﻲ : ﺃﺩﻧﺎﻩ ﻓﻲ ﺍﻟﻤﻮﻗﻊ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ ﻟﻠﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻹﺟﺘﻤﺎﻋﻴﺔ
www.gosi.gov.sa/vc
ﺗﻌﺪ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﻣﻦ ﺍﻟﻮﺛﺎﺋﻖ ﺍﻻﻟﻜﺘﺮﻭﻧﻴﺔ ﺍﻟﺤﻜﻮﻣﻴﺔ ﺍﻟﺮﺳﻤﻴﺔ ،ﻭﻳﺤﻈﺮ ﻗﻄﻌﻴﺎ ﺗﻘﻠﻴﺪﻫﺎ ﺃﻭ ﺇﺩﺧﺎﻝ ﺃﻱ ﺗﻌﺪﻳﻼﺕ ﻋﻠﻴﻬﺎ ﺳﻮﺍﺀ ﺑﺎﻹﺿﺎﻓﺔ ﺃﻭ ﺍﻟﺤﺬﻑ
ﺃﻭ ﺍﻟﺘﻐﻴﻴﺮ ﻓﻲ ﺑﻴﺎﻧﺎﺗﻬﺎ ﺃﻭ ﻏﻴﺮ ﺫﻟﻚ ﻣﻦ ﺍﻧﻮﺍﻉ ﺍﻟﺘﻌﺪﻳﻞ ،ﻭﺗﻌﺪ ﺍﻟﺸﻬﺎﺩﺓ ﻻﻏﻴﺔ ﺇﺫﺍ ﺷﺎﺑﻬﺎ ﺷﻲﺀ ﻣﻦ ﺫﻟﻚ ،ﻛﻤﺎ ﺗﻌﺮﺽ ﺻﺎﺣﺒﻬﺎ ﻟﻠﻤﻼﺣﻘﺔ ﺍﻟﻨﻈﺎﻣﻴﺔ
ﺃﻣﺎﻡ ﺍﻟﺠﻬﺎﺕ ﺍﻟﻤﺨﺘﺼﺔ ﺑﺎﻹﺿﺎﻓﺔ ﺇﻟﻰ ﻣﺎﻳﻔﺮﺿﻪ ﻧﻈﺎﻡ ﺍﻟﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ﻣﻦ ﻋﻘﻮﺑﺎﺕ ،ﻭﻻﻳﺠﻮﺯ ﺗﺪﺍﻭﻝ ﺍﻟﺸﻬﺎﺩﺓ ﺇﻻ ﻓﻲ ﺍﻷﻏﺮﺍﺽ ﺍﻟﺘﻲ
ﺃﺻﺪﺭﺕ ﻷﺟﻠﻬﺎ ﻭﻓﻘﺎ ﻷﺣﻜﺎﻡ ﻧﻈﺎﻡ ﺍﻟﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ،ﻭﺍﻟﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ﻏﻴﺮ ﻣﺴﺆﻭﻟﻪ ﻋﻦ ﺃﻱ ﺁﺛﺎﺭ ﺃﺧﺮﻯ ﻣﺘﺮﺗﺒﺔ
ﻗﺒﻞ ﺍﻟﻐﻴﺮ ﻋﻦ ﺍﻟﺸﻬﺎﺩﺓ ﻭﻏﻴﺮ ﻣﺴﺆﻭﻟﺔ ﻋﻦ ﺃﻱ ﻋﻤﻠﻴﺔ ﺗﺰﻭﻳﺮ ﺃﻭ ﺗﻌﺪﻳﻞ ﺗﺘﻢ ﻋﻠﻰ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻮﺍﺭﺩﺓ ﻓﻴﻬﺎ .
2350387713
̏̐̒̍̐̔̔̎̐ͧ̕+p9̀
Ƚo̎̑̑̍Ϳ̍̎Ϳ̎̒ͧ*y/`
̖̐̍̎̍̍̏̎̑̕2zf˯gX0̀ R/z`e
m+r,%e
zpk`ry+M̀
Y%5
˯S
ʇ̀&`<
˼P
+r,%˯
zjʘLk=
`+%ʘ\ʀ
V
a]˯˾
]ɱleMj˴
˯c,Mb(,̀r\2a`eM̀zp`,zU
Nzf M 0ele̖̐̍̎̍̍̏̎̑̕ͅ2zfegX/ȑ̍̎̐̍̐̍̒*y/ȓ̓̍̏̍̍̑̎̒̎gX/x
/!b!4
.oʓ
y/5̀fIjʝ̀ɀYD
=Xk˯_s(+ʓ
Z%̀q̀s)˴
\py,̀qʙeMepjrzes]%̀
p!`
zpk`ry+M̀C
5XʜS
ʆ c,LNei9̀
c̖̏̍̎̍̑̐̍Z
Ts˯Ƚo̎̑̑̍̍̏̒̕*y/w
$+p9̀.o_sMUex
ɻ y
{
f40̀ g)`
NzXs˰
%ʘr˲
ʚcIk`le 0)5
eYzs̀m.o
ϝ
ϝϝͨύχϠϚͨύϕϜͨϙχzp`NXseleZ
Y%`,Mʘ+p9̀m.p,Myʘ
100171000050913
Ƚo̎̑̐̕Ϳ̎̏Ϳ̍̐ͧ> z(ɰ̀*y/
̖̐̍̎̍̍̏̎̑ͧ̕2zf˯gX0̀
TA
˯fzỲyʌ
ʓ
bz!5
+p8
Ο
ΊΝϘϋύϏϙϚϘχϚϏϕϔωϋϘϚϏόϏωχϚϋ
+r,%˯ zjʘLk= `+%ʘ\ʀ ͧVa]˯ib(,̀r\2a`eM̀zp`,p9
̖̐̍̎̍̍̏̎̑̍̍̍̍̐ͧ̕{yʍ̀ gX0̀bf%rͅȽo̎̑̐̕Ϳ̎̏Ϳ̍̐ͧ*y/TA˯fzỲyʌ ʓb!5 e
ͧɿ z0̀2\0˯iskL
6̀,jʘw$ͧ{ %̀, ͧky,˯
̏̐̐̏̓ͧx
,yɫ̀2e0̀ͧ,yɫ̀W
r,k<
̖̖̍̍̓̓̒̓̏̑̎̐̍̐ͧV p`
b(,̀r\2a`eM̀zp̀
NzXs˰%ʘr˲
ʚcIk`lea40eYzs̀m.o
National Address
اﻻﺗﺣﺎد ﻟﺻﻧﺎ ﺔ اﻻﻧﺎﺑﯾب اﻟﺳ ودﯾﺔ
6OJPO1JQF*OEVTUSZ,4"
Union Pipes Industry K.S.A. Map location
ا ﻣﻣ ﻛﺔ ا رﺑﯾﺔ ا ﺳ ودﯾﺔ- راﺑﻎ، ا ر م اﻹﺿﺎﻓﻲ، : ا رﻣز ا ﺑرﯾدي، ﻣدﯾﻧﺔ ا ﻣ ك ﺑدﷲ اﻻ ﺗﺻﺎدﯾﺔ، ا ﻣﻧط ﺔ ا ﺻﻧﺎ ﯾﺔ ا ﻣرﺣ ﺔ اﻻو ﻰ، ﻣﺑﻧﻰ
ر م ا ﻰ: ﻧوان ا وطﻧﻲ
.National Address : Building no.3654, Industrial Area Phase 1 King Abdullah Economic City, Zip code 23989, addit.no. 6704, Rabigh, K.S.A
SASO Certificate (If Applicable)
Project list
( اﻻﺗﺣﺎد ﻟﺻﻧﺎﻋﺔ اﻷﻧﺎﺑﯾب ) اﻟﺳﻌودﯾﺔ
Union Pipes Industry K.S.A.
UPI (KSA) LIST OF SELECTED MAJOR CUSTOMER FOR ONGOING & COMPLETED PROJECTS
1 Al-Gedrawy General Contracting Central warehouse - King Abdullah Economic City Rabigh
Saudi Service for Electro Mechanical Works Co Construction of Storm water networks drainage in
2 Buraidah
(SSEM). Shaqah District Tender.
3 Saudi Pan Kingdom (SAPK) ﻣﺸﺮوع ﺗﻄﻮﯾﺮ اﻟﺒﻨﯿﺔ اﻟﺘﺤﺘﯿﺔ ﺑﺎﻟﻤﻨﻄﻘﺔ اﻟﺼﻨﺎﻋﯿﺔ ﺑﻤﺪﯾﻨﺔ وﻋﺪ اﻟﺸﻤﺎل Turaif
MODON - Jeddah4 Completion of Industrial
4 Al Ayuni Investment and Contracting. Jeddah
Infrastructure of Al Waha
Operation and Maintenance of water connection
5 Eastern Projects Contracting Co. Al-Hussa
housing in Al Husaa area Project.
6 Fathallah Qasem & Partner Company Jordan Projects Jordan -Amman
7 Saudi Parsons (Aramco Project) Energy Industrial city Abqaiq Road Abqaiq
8 Sinmar Al Riyadh Contracting Est. Bin Zagr Where house Rabigh
9 Metito LTD. KAEC SWRO PLANT- Intake and Outfall System Rabigh
10 Al Sayegh Group of Companies Water Treatment Plant project in Targis Besha
11 Sulieman Al Qasoumi Contr. Est. Sewage Treatment Plant in Jizan. Jizan
12 Bin ladin Trading Co. (Nesma Contracting Co.) Sharam Royal Complex. Tabuk - Sharma
13 Bin Jarallah Group King Khalid University Abha
14 Al-Bassami Group Co. Derange Project Jeddah
15 Irrigation World Agri. Est. Privet Irrigation Project Jeddah
16 Saudi Itqan Contracting Co. (Thabat Contracting Co) Sewage Treatment Plant Riyadh
17 Zetas Irrigation Project Jeddah
18 Building Steel Trading Est. (Al-Bawani Contracting) Sharma Royal Complex Projects. Tabuk - Sharma
19 Prudent EM Contracting Irrigation Project Jeddah
20 Thabat Construction Co. Ltd. STW-Manfuha. Riyadh
اﻟﻣﻣﻠﻛﺔ اﻟﻌرﺑﯾﺔ اﻟﺳﻌودﯾﺔ- راﺑﻎ، ٦۷۰٤ اﻟرﻗم اﻹﺿﺎﻓﻲ، ۲۳۹۸۹ : اﻟرﻣز اﻟﺑرﯾدي، ﻣدﯾﻧﺔ اﻟﻣﻠك ﻋﺑدﷲ اﻻﻗﺗﺻﺎدﯾﺔ، اﻟﻣﻧطﻘﺔ اﻟﺻﻧﺎﻋﯾﺔ الﻣرﺣﻠﺔ اﻻوﻟﻰ، ۳٦٥٤ رﻗم اﻟﻣﺑﻧﻰ: اﻟﻌﻧوان اﻟوطﻧﻲ
National Address: Building no.3654, Industrial Area Phase 1، King Abdullah Economic City, Zip code 23989, addit.no. 6704, Rabigh, K.S.A
( اﻻﺗﺣﺎد ﻟﺻﻧﺎﻋﺔ اﻷﻧﺎﺑﯾب ) اﻟﺳﻌودﯾﺔ
Union Pipes Industry K.S.A.
SN Customer Name Project Name Location
21 Saudi Pre insulated Pipes Industries LLC. SPPI Riyadh
22 Al Yamama Co. PIP-Home Con RYD WST Riyadh
23 Masoud Al Eid Co. Water Network Doma-al-Jandel
24 Gulf Asia Contracting Co. Project Gulf Asia Turaif
25 Al Watan Alghali Est. City of development in Asir region Al-tunmah
26 Canadian Crystalline Water India Ltd. Potable Water Maldives
27 Al Nimal Holding Co. Water Network Riyadh
28 SAS Construction Co. Tabuk Airbase Project Tabuk
29 Saudi Pipe Systems Company. HDPE pipes insulation Project Jeddah
30 Qawasy Pipe coating Factory. Aramco-water purification project Al khobar
31 United Special Technical Services LLC. Aramco-water purification project Al khobar
32 Shade Corporation Ltd. Aramco-Spark WWC to MODON-MECH Jubail
33 Pro Pacific DMCC. Water distribution project Ras al khair
34 Esam Al Taqwa. Adean Project Yemen
اﻟﻣﻣﻠﻛﺔ اﻟﻌرﺑﯾﺔ اﻟﺳﻌودﯾﺔ- راﺑﻎ، ٦۷۰٤ اﻟرﻗم اﻹﺿﺎﻓﻲ، ۲۳۹۸۹ : اﻟرﻣز اﻟﺑرﯾدي، ﻣدﯾﻧﺔ اﻟﻣﻠك ﻋﺑدﷲ اﻻﻗﺗﺻﺎدﯾﺔ، اﻟﻣﻧطﻘﺔ اﻟﺻﻧﺎﻋﯾﺔ الﻣرﺣﻠﺔ اﻻوﻟﻰ، ۳٦٥٤ رﻗم اﻟﻣﺑﻧﻰ: اﻟﻌﻧوان اﻟوطﻧﻲ
National Address: Building no.3654, Industrial Area Phase 1، King Abdullah Economic City, Zip code 23989, addit.no. 6704, Rabigh, K.S.A
Project 1 Project 2 Project 3 Project 4 Project 5
Water Water Water
Asset class: Roads. Retail.
Transmission. Transmission. Purification.
KAEC Central
SWRO warehouse -
Water
Adean Potable PLANT- King
Name of Project: distribution
Project. Water. Intake and Abdullah
project.
Outfall Economic
System. City.
Canadian
Al-Gedrawy
Pro Pacific Esam Al Crystalline
Client: Metito LTD. General
DMCC. Taqwa. Water India
Contracting.
Ltd.
Area:
Ras al khair Yemen Maldives Rabigh Rabigh
Fire
Water Water Water Station/
Asset class: Airport.
Treatment. Treatment. Treatment. Emergency
services.
Aramco-
Aramco- Aramco- HDPE
Spark Tabuk
Water Water pipes
Name of Project: WWC to Airbase
Purification Purification insulation
MODON- Project.
Project. Project. Project.
MECH.
United
Special Qawasy Shade SAS Saudi Pipe
Client: Technical Pipe Coating Corporation Construction Systems
Services Factory. Ltd. Co. Company.
Llc.
Area:
Al Khobar. Al Khobar. Jubail. Tabuk. Jeddah.
Supply Of
Supply Of Supply Of Supply Of Supply Of
Scope of Service: HDPE
HDPE HDPE HDPE HDPE
PE100 Off-
PE100 Off- PE100-PN16 PE100- PE100-
Sizes
Sizes Pipes. Pipes. Pipes. Pipes.
Pipes.
SRQU-115-19
Mr. Al Horaibi,
We are pleased to inform you that your company is included in the Saudi Aramco Supplier
Information System under Vendor Code No. 10061799 and Plant ID 30008646 for the following
products provided your company continues to meet relevant Saudi Arabian and Saudi Aramco
standards.
9COM Description
6000000039* PIPE & FITTINGS; NONMETALLIC, SOLID WALL
*Approved With Limitations
This approval, however, should not be construed as a commitment by Saudi Aramco to purchase
from you. Being approved as a supplier only grant your company the opportunity, along with other
approved sources, to respond to requests for submitting proposals in accordance with Saudi
Aramco's established policies and procedures. All purchase agreements and orders will be issued
based on the name and address stated in your commercial registration (CR), as stated above.
Saudi Aramco wishes to remind you that being recognized as a potential supplier is a privilege
which carries with it serious obligations and responsibilities to act in a legal and ethical manner.
We wish to remind you of the Saudi Aramco Supplier Code of Conduct (SCOC) which you
acknowledged. Failure to abide by the principles set forth in the SCOC can result in adverse
actions being taken by Saudi Aramco against you including suspension of you as a supplier.
Saudi Aramco also expects each of its suppliers to satisfy each of the requirements of any
purchase agreements or orders which might be placed and to act responsibly and reliably as a
supply chain supplier.
-------------------�.'.age.lo,�-------------------
Saudi Arabian Oil Company {Saudi Aramco), is a company formed by Royal Decree No. WS dated 04/04/1409H, and ,s a Joint stock company, with certificate of registration number 2052101150 having its prmc1pal office at P.O. Box
5000, Dhahran. Postal Code 31311, Kingdom of Saudi Arabia and a fully paid capital of SAR 60,000,000,000.
Vendor Number: VDR15614329
Dear Vendor,
I am pleased to inform you that your company UNION PIPES INDUSTRY CO. KSA has been successfully
registered with Ma’aden.
From now onwards, your company may receive from Ma’aden or its affiliates, request(s) to participate in
tenders (RFP/RFQ) for Goods and/or Services and/or Projects in line with your competencies. However,
please do not read into this letter that it constitutes a guarantee that you will receive any such requests, as
those are dependent on many factors evaluated according to our discretion as needs arise.
If you have any further questions or require additional information then don’t hesitate to contact me.
We appreciate your interest in becoming a Ma’aden vendor and look forward to the opportunity to work with
you.
Best Regards,
--------------------------------------------------------------------------------
This message and any attachments are confidential and intended solely for the use of the individual or entity to
whom they are addressed. If you are NOT the intended recipient you should not use, copy, disclose or place
any reliance on this e-mail or its contents, and immediately notify the sender by return e-mail and delete all
copies of this e-mail from your system.
Statement and opinions expressed in this e-mail are those of the sender, and do not necessarily reflect
MA’ADEN point of view.
postmaster@maaden.com.sa
Scanned with CamScanner
MATERIAL SUBMITTAL FORM
Material Details
Material Name HDPE Pipes including fittings for above ground drainage
Specifications
Section 22 10 00
Reference
Manufacturer
Union Pipes Industry Location
Name
Contractor PM
PMCM Material
1- Sample and data sheet for HDPE Pipe fittings for pressurized drainage to approve before pur-
chasing
PMCM Comments
Comments:
Material Details
Material Name HDPE PE100 SDR11 Pipes including fittings for underground domestic water
Specifications
Section 22 10 00
Reference
Manufacturer
Union Pipes Industry Location
Name
Contractor PM
PMCM Material
1- Sample and data sheet for HDPE Pipe fittings for pressurized drainage to approve before pur-
chasing
PMCM Comments
Comments:
Submittal Status:
A - Approved B - Approved as Noted C - Revise and Resubmit D - Rejected
Proposed vendor is acceptable for the subjected scope of work at KSP - CP03
PMO/Client Comments:
Distribution:
Engineer Contractor Others (Specify)
07.04.2022
11/4/22
"B"
10-11-2021
11-11-2021 11/11/2021
Project: Rua Al Madinah Infrastructure Work Advance Package Document Ref. No. : RUA‐AP‐AICC‐MS‐MECH‐058 REV 00
Material Submittal for HDPE Pipe & Fittings for Potable,
Contractor: AICC Document Description :
Irrigation & TGWD Supplier: Union Pipes Industry Co
PMC: Hill International Middle East Review Date: 11‐Nov‐21
TSC: KEO International Consultants Status: Code B
HILL/KEO AICC
Name: Mohamed Thahir Sheik Ismail Name
Position: Mechanical Engineer Position
Signature: Signature:
Date: Thursday, November 11, 2021 Date:
Disclaimer: Permission to proceed shall not constitute acceptance or approval of design details calculations,analysis,test methods or materials developed or selected by contractor and shall not relive the contractor from full compliance with
contractual obligations
Page 1 of 1
�
i•-·• ·,11J:. r
-- NHC
Client:
.
-- .allh
PMC:
'c:3 ■ 14
Consultant
uta.l.c
• g lJ.JID
------· .•
Khatib & Alami
··- yl I I I ii
e,r,se,b
General Contractor:
SUPPLIER PRE-QUALIFICATION
AR ME CV LA Submittal No. I s p I - 2
o I aI Rev. I I
O 0
ST EE QS OT Date: 29/Mar/2022 Contract Drawing No.
To: Khatib & Alami From: AnsabCo.
Supplier
Attachments
De$Crlption
Name: a,i.)_,.....)1 �U':ill �u.,.,J ,)��I r✓l Comoanv Profile
Telephone No.: r✓l Valid Commercial Reoistration Certificate
Address: RIYADH r✓l Valid MembershiD of Chamber of Commerce
Person in Charge and His Mobile No.: r✓l Valid VAT Reoistration Certificate
Supplier's Qualifying Log: r✓l Valid Zakat & Tax Certificate
Years of Experience (In Total): r✓l Valid General Omanization of Social Insurance
Years of Experience In Saudi Arabia: n Valid Saudization Certificate
□ Valid Contractor Classification Certificate
□ Authorized Signatory of Responsible Person
Material to Supply: HOPE PIPES
· �n1nn,,�
Approval of Supplier does not relieve contractor of his responsibilities under contract's tenns. ;:. L� f/7"
1=��-:;
�Al C, I3- c.. d,'iili(.'!..1-4 <:.
.. ,� , .1, � •.•tI , ;::...���� , � � �(lq,,nar�3.-r-:r;,} -Y'
S'.�y:µ�::',_r,,..lJ \-\'v\'& �\\I-� \6'
-
-"'.'c
u• · ��\
c...:.., 'J ·· J)I -/'J \1f�1
vflS4)
C,- - ,J---
,. -�
n->Lu c::x .., .�� c,h L,�
/ ll -c;._- ),.� l -� � - y_ I �
� . .. �
9. 1
- -- ---
'---
,.• .,,,AL. 51 ,.;,- ,..., -;; 'L� p JJ ;
.t
I J ::;IV--� _.;I'
--
ForK&A:
.
Signature: G-:1
� ,.,..•..J.;/ • r \: �-:s
Date: 5< <J<J..2
/() ,,. .)../ ._,
Coe/e f3
{../' '
ACTION CODE:
A=Approved
B = Approved as noted g- C = Resubmit as Noted
D = Disapproved
D
c=:J
Ref. In: Ref. Out:
NOTE: The Client - National Housing Company(NHC} has the authority to approve/disapprove the supplier without any objection from other sides.
.
..'Al.a.ti �1��l3,JJ �,t.e...:ii lS ...z:
�j/4�..>!}W�
-
I I I If 1202.L
P ��� hred
2022/7/5 Aconex
10 Spine Infrastructure
Spine Infrastructure
NEOM
Saudi Arabia
Status N/A
DETAILS
Letter Initiator
Letter Addressee
Discipline Mechanical
(0 selected)
Revision
File Document No Revision Title Status
Date
https://ksa1.aconex.com/Logon 1/2
2022/7/5 Aconex
Revision
File Document No Revision Title Status
Date
MESSAGE
In reference to BEC-WTRAN-056601, please find the attached updated document status to update your
document register, for your reference, record and necessary action.
Regards,
https://ksa1.aconex.com/Logon 2/2
2022/7/5 Aconex
10 Spine Infrastructure
Spine Infrastructure
NEOM
Saudi Arabia
Status N/A
(0 selected)
Revision
File Document No Revision Title Status
Date
MESSAGE
10-723713-
B Document B - Incorporate
4800000293-PCC- EPM DCC
Management Comments - Proceed
MEC-CRS-000010
https://ksa1.aconex.com/Logon 2/2
5/24/22, 4:32 PM Aconex
Final (WF-007216) R01H14 - [Nesma-S] Material Submittal for HDPE Pipes &
Fittings- Union Pipes Industries
MESSAGE
The attached documents have completed the "R01H14 - [Nesma-S] Material Submittal for HDPE Pipes & Fittings- Union Pipes Industries"
workflow with the following results :
https://ksa1.aconex.com/Logon?Action=View&ENTITY=MAIL&ID=1353522002&USERID=1342276329 1/2
5/24/22, 4:32 PM Aconex
R01-H14C14-NUI-MAT-
Document Control Review N Pandiyan Accepted
IR-0004
https://ksa1.aconex.com/Logon?Action=View&ENTITY=MAIL&ID=1353522002&USERID=1342276329 2/2
B
07.04.2022
11/4/22
9/12/22, 4:11 PM Aconex
Status N/A
(0 selected)
1SV10110-110C01-HAI- Haif-Vendor Pre-Qualification for HDPE Pipes & Fittings-Al Review Not
C0
PRQ-UW-0001 Munif Required
1SV10110-110C01-HAI- Haif-Vendor Pre-Qualification for HDPE Pipes & Fittings- Review Not
C0
PRQ-UW-0002 Union Pipes Industry K.S.A. Required
MESSAGE
The attached documents have completed the "SV-Staff Village Wide-(HAI 110C01)-Haif-Vendor Pre-Qualification for HDPE Pipes & Fittings"
workflow with the following results :
1SV10110-110C01-HAI-
Amaala QA/QC Check M Alhajji Accepted
PRQ-UW-0001
https://ksa1.aconex.com/Logon 1/2
9/12/22, 4:11 PM Aconex
Manager Review
a. Al Munif. 1) CR copy
Not attached. 2) Zakat
certificate expired 3) Gosi
certificate not attached. 4)
Calibration certificate due
dates elapsed for the
Snr. Construction Manager
G Saravanan Accepted with Comments attached laboratory
Review
equipment in PQ. 5)
Compliance to the relevant
project specifications
highlighting offered
materials for PQ Not
mentioned.
1SV10110-110C01-HAI-
Amaala QA/QC Check M Alhajji Accepted
PRQ-UW-0002
Senior Construction
S Millin Accepted
Manager Review
https://ksa1.aconex.com/Logon 2/2
I
LP'I.J·
.. J' 1 Ci.i.u.o.J
1
.. o•Sinll
- ;;~·-•1
~
ROYAL COMMISSION FOR RIYADH CITY
In response to your letter Ref: FHD/ RCRC (GR)/ EAN / 0086, dated 31 August 2022, in which you
submitted (Union Pipes Industry K.S.A) Prequalification Documents for HOPE Pipes and Fitting.
We have reviewed this submittal and it is Approved as noted the following comments:
1 . Sample to be delivered to Site for approval matching Project Specs.
2. Subjected to All QA/QC procedures on site.
3. SASO Certificates for material to be delivered to site and to be valid.
4. All tests in a third-party laboratory should be submitted & approved of Relevant
authorities.
5. All governmental docs should be attached and to be valid.
6. Warranty certificate as per Project Specs .
7. MIR (Material inspection request) should be done once material will be on Site and to be
approved from consultant with above required attachment docs .
fo.;/~~
~aleh Alfayz1 3220907507
Construction Director
Green Riyadh
(·11) 1\•f··· l...,...kt..o - (•11) ;H···· ..,;.,;,;b - ~ ""~l ~_.>X]l ~.b.l.44ll rm - lf 6lf - u=.l,.yll- ..,;:,lyli\...JL.~~ - -s.:~ L ~_>AL ~/t:... Vl ll
7 666 Amr Aldhamry st. - Assafarat Dist. Riyadh 12512-3 166 Saudi Arabia - Tel (01 1) 8020000 Fax (0 11) 8020001
I WWW.RCRC.GOV.SA
AL- FAHD Co. •••'---eSt-~;,...,t. 4 SJ f;,
For Trad ing Industrial & Contracting ..:;,":;/~L___;;J, '-' ~ L..:.....-J '-' .._, ~
Paid Capital ( JOo,ooo,ooo S.R.) (J~ ' .. • • ' ·" •) t~-111 JUI ._,..,i_;
C .C. : 4387 C.R. Head Off. 1128000011 1\YA•• • •\\ ~.).:,·V" t'fAV~~t.,.~~~~.)
C.C. : 103021 Branch C.R.: 1010146766 \ • \ •\t WY\ .,r-~.:.·1.)"' \•'f•Y\ ~~L>~I ~.)
Dear Sir,
With regards to the above referenced project and subject, please find attached the
both (Hard & Soft) copies of the Prequalification documents of (Union Pipes Industry)
Best Regards,
Green Riyadh
P ·oject:
Abdallah Dandachi
Info Action (~r~~ .
--
~/tf ps I
1 A"
I
r I'
.
'
'---·
I
I ,
I i:--lEI
Kingdom of Saudi Arabia- P.O.Dox : 5445 Riyadh J J 411 ' ' t YY ~I.,!JJI Otto y.~ - ~.>_,_..__.__.JI ~_raJ I ~I
Tel.: 1746666- J.' ax: 2747788 YVtVVAA : ~L-....l!> - YVtiii\: .;_,_,;, .!''
E-Mail : rydcontracting@al-fahd.net Website : www.al -fahd.com
union Pipe Industry HDPE PE100 SDR11 PN16 pipes including fittings for irrigation network application are approved subjected to be-
low comments. 1.Derated pressure rating shall be suitable for application. 2.Provide sample board prior to material purchasing.3.In-
stallation, storage and handling shall be as per approved shop drawings, project specifications and manufacturers recommenda-
tions. 4.Provide material test certificates upon delivery of material to site.5.All pipes and fittings shall follow same dimensional stand-
ards.6.All pipes and fittings to be from same supplier.
Abdul.M - M Saleh 08/09/2022
Final (WF-004396) R01H13 - [AAJ] Material Submittal - Buried HDPE Pipes and
Fittings for Pre-Insulated Cold-Water System [Union Pipes Industry - UPI]
Status N/A
(0 selected)
R01-H13C08-AAJ- Material Submittal - Buried HDPE Pipes and Fittings for Pre-Insulated Accepted with
02
MAT-PL-0013 Cold-Water System [Union Pipes Industry - UPI] Comments
ATTRIBUTES
MESSAGE
The attached documents have completed the "R01H13 - [AAJ] Material Submittal - Buried HDPE Pipes and Fittings for Pre-Insulated Cold-
Water System [Union Pipes Industry - UPI]" workflow with the following results :
https://ksa1.aconex.com/Logon 1/2
9/13/22, 2:36 PM Aconex
PL-0013
Design Consultant
Sustainability Review F Khan Review Not Required
(WSP)
TRSDC Sustainability
Y AbuSabir Review Not Required
Review
TRSDC Construction
M Karram Accepted with Comments
Review
https://ksa1.aconex.com/Logon 2/2
Material Submittal Form
TRS-CN-FRM-0018
General Information
Material Information
Material Description Buried HDPE Pipes and Fittings for Pre-insulated Cold-Water System
(One item only per Form)
Manufacturer/Supplier
Company Name UPI Locally Manufactured
Address KSA
Local Agent UPI Other Details Approved Vendor
under PHE-107
Program Date Expected Arrival Date
(Material Required on Site) (on Site)
Contractor’s
Rami Oueini
31-Aug-22
Name Signature Date
Engineer’s - Comments
Comments:
WSP:
Status - Accepted with comments.
Please refer to the comments on the attached sheet
Status Code
Reviewer
Serial Item/Part/Area Comment/Instruction/Observation
(Initials)
Specification Butt welding is recommended by manufacturer as the electro fusion AS
1.
compliance welding fitting is not available. Accepted subject to TRSDC approval
Name: Syed Ansar Signature:
Date: 06-09-2022
Note: The Engineer’s approval shall not in any way relieve the Contractor of his obligation under the Contract. The Contractor shall be solely
responsible for the soundness and the correctness of the submitted Method Statements, Materials, Shop Drawings, Calculations and other
Documents as per the Contract.
Codes: A: No Objection B: No Objection subject to comments C: Objection, Revise & Resubmit D: For Information
International Certificates
ITP & NDT Procedure and Forms (If applicable)
N/A
NOT APPLICABLE
Basic Tender Specification Review
UV resistant.
The service life time for splice enclosures for underground applications shall be a
minimum of 30 years.
Conduit dimensions:
Outside diameter: 40 mm (+-0.5mm)
Inside diameter: 33mm (+/-0.1mm)
Material:
Material: HDPE or equivalent
Density: ≥ 0.94 g/cm3
Pressure stability
Nominal pressure rating: ≥ 10 bar
Max. Pressure rating: ≥ 16 bar (at +35°C for 2 hours)
Electrical details
Dielectric strength: ≥ 20kV/mm
Mechanical details:
Crush resistance: ≥ 500N / m at +20°C
Expansion coefficient: max. 2 x 10-4 1/K in the range of 0° to +70°C
Bending radius: 1.000 mm at +20°C, 2.500 mm at 0°C
800
(NOTE 6 AND 9) ACTUAL CABLE ROUTE (NOT MANDATORY ON AREAS WHERE IT CAN RESULT TO
INTERFERENCE WITH EXISTING UTILITIES SUCH AS HIGHWAYS). DETECTABLE WARNING TAPE
TO NEAREST 2X FOC 40mm HDPE CONDUIT CAN BE USE AS AN ALTERNATIVE.
1000 MIN 1000 MIN 5. ELECTRONIC CABLE MARKER SHALL BE USE TO INDICATE THE LOCATION OF MANHOLE
2 x FOC 40mm HDPE CONDUIT SHELTER
CONTAINING FOC SPLICE JOINTS.
HORIZONTALLY HORIZONTALLY 6. FOC MANHOLES SHALL BE USED AS PULL PITS AND SPLICE BOXES.
7. ALL UNUSED DUCT OPENING SHALL BE SEALED AND CLOSED WITH END CAP. SEAL MATERIAL
SHALL BE WATERPROOF AND FIRE RESISTANT. (MINIMUM OF 1 HOUR FIRE RESISTANT
300
BENDING RADIUS TO NEXT MANHOLE RATING)
(NOTE 10) BENDING RADIUS 8. FOC WARNING TAPE SHALL HAVE MINIMUM VERTICAL CLEARANCE OF 300mm FROM THE FOC
DUCT AND 500mm FROM THE FINISH GROUND LEVEL.
FROM PREVIOUS (NOTE 10) 9. REFER TO TYPICAL DRAWING TSE-00-G-GN-0000-ILF-G-IC-DRW-00003 FOR THE DETAILS OF
MANHOLE FOC MANHOLE.
10. FOC DUCT MINIMUM BENDING RADIUS SHALL NOT EXCEED 1M.
2 x FOC 40mm HDPE 11. FOC MANHOLE SHALL BE PROVIDED IN ALL SECONDARY TAPPING POINT FOR THE PROVISION
PRIMARY MAINS (PM) CONDUIT OF FUTURE CONNECTION.
12. FOC MANHOLE SHALL BE PROVIDED IN ALL RTU SHELTERS.
BENDING RADIUS 13. EACH FOC MANHOLE AND SHELTERS SHALL BE TAGGED IN THE ROUTING.
(NOTE 10) 14. DISTRIBUTION AND CONNECTION OF FOC FROM PRIMARY MAINS TO THE SECONDARY MAINS
SHALL BE DONE INSIDE THE RTU SHELTER VIA FOC PATCH PANEL AND OTHER NECESSARY
DISTRIBUTION EQUIPMENT.
PLAN VIEW
LEGEND
PRIMARY MAINS (PM) OR SECONDARY
MAINS (SM)
PM OR SM VALVE OR
FLOW CHAMBER
FOC MANHOLE
(NOTE 6 AND 9)
1000X800(LXW)
TYPICAL DUCT AND MANHOLE LAYOUT IN PM AND SM VALVE AND FLOWMETER CHAMBERS
FOC WARNING TAPE FOC WARNING TAPE
(NOTE 8) (NOTE 8)
BENDING RADIUS
(NOTE 10)
REFERENCE DOCUMENTS
BENDING RADIUS
PRIMARY MAINS (PM) DOCUMENT TITLE DOCUMENT NR
(NOTE 10)
SIDE VIEW
KEYMAP
(NOTE 12) (NOTE 12) RTU SHELTER
(NOTE 14)
N
FOC DUCT
WARNING TAPE Service Layer Credits: Sources: Esri, HERE, Garmin, Intermap, increment P Corp., GEBCO, USGS, FAO, NPS, NRCAN, GeoBase, IGN,
Kadaster NL, Ordnance Survey, Esri Japan, METI, Esri China (Hong Kong), (c) OpenStreetMap contributors, and the GIS User Community
(NOTE 8)
2023 TSE-00-G-GN-0000-ILF-G-IC-DRW-00002-Typical details for FOC and Manhole tench.dwg
500 MIN
300 MIN
. . . . . .
REV DATE ISSUE, SCOPE OF REVISION PREP. CHECKED APPR.
CLIENT:
ROYAL COMMISSION FOR RIYADH CITY
ENVIRONMENT & INFRASTRUCTURE PLANNING DEPARTMENT
SM VALVE CHAMBER
Roundabout No. 3, Al-Kindy Square, Diplomatic Quarter, Riyadh, Saudi Arabia
(NOTE 11)
SECONDARY MAINS PROJECT:
0 (SM)
25 TSE SUPPLY FOR GREEN RIYADH PROGRAMME
2 x FOC 40mm HDPE PROJECT MANAGEMENT AND COORDINATION
FOC CONDUIT DN 40 HDPE DUAL FOC DUCT 45°
45
PIPE DIA
BEDDING DEPTH AS PER PIPELINE DRAWINGS DRAWING TITLE:
SECTION VIEW TYPICAL DUCT AND MANHOLE LAYOUT IN SM CONNECTION FOR VALVE AND FLOWMETER CHAMBERS TYPICAL FOC TRENCH CROSS SECTION,
DUCT AND MANHOLE LAYOUT
0.50m²
1:XXX 12021 TSE-00-G-GN-0000-ILF-G-IC-DRW-00002 0 01 OF 01
NOTES
1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE SPECIFIED.
2. THE FOC MANHOLE COVERS SHALL MEET THE FOLLOWING LOAD REQUIREMENTS:
· CLASS B125 (EN124) FOR SIDEWALKS, PEDESTRIAN AREAS AND COMPARABLE SURFACES
· CLASS D400 (EN124) FOR CARRIAGEWAYS OF ROADS (INCLUDING HIGHWAYS AND OTHER TYPES OF
ROADS), SIDE STRIPS OF ROADS AND PARKING AREAS USED FOR ALL TYPES OF ROAD VEHICLES
3. ALL METAL HARDWARE SHALL BE HOT DIPPED GALVANIZED.
4. ALL CABLE MANHOLES SHALL PROVIDE MINIMUM 2 MAIN AND 2 RESERVE CONDUIT / CABLE
ENTRY GLANDS TO ALLOW INSTALLATION OF ADDITIONAL CABLES.
B 5. THE CONDUIT / CABLE ENTRY GLANDS SHALL BE SEALED TO THE CABLE MANHOLES WALLS
AGAINST THE INGRESS OF WATER AND MATERIAL. ALL UNUSED DUCT OPENING SHALL BE SEALED
AND CLOSED WITH END CAP. SEAL MATERIAL SHALL BE WATERPROOF AND FIRE RESISTANT (MINIMUM
OF 1 HOUR FIRE RESISTANT RATING)
6. END BELLS SHALL BE INSTALLED ON BOTH THE END OF ALL CONDUITS RUNS TO PREVENT DAMAGE TO
THE CABLES DURING CABLE PULLING OR CABLE AIR BLOWING.
DIRECTION WITH RESPECT TO THE PIPE 7. THE INSTALLATION OF FOC INTO THE 40MM HDPE DUCT SHALL BE DONE BY AIR BLOWING.
RESERVE
(NOTE 4 & 5) FINISHED GROUND LEVEL
WARNING TAPE
RESERVE
(NOTE 4 & 5) RESERVE
(NOTE 4 & 5)
300 MIN
800
A A
LEGEND
BEDDING DEPTH AS PER
PIPELINE DRAWINGS
1000
RESERVE
(NOTE 4 & 5)
B
PLAN VIEW
REFERENCE DOCUMENTS
DOCUMENT TITLE DOCUMENT NR
PROJECT:
DRAWING TITLE:
0.50m²
1:XXX 12021 TSE-00-G-GN-0000-ILF-G-IC-DRW-00003 0 01 OF 01
Material Interchangeability
N/A
NOT APPLICABLE
Proven Design
N/A
NOT APPLICABLE
Manufacturer Experience
Union Pipes Industry aka UPI-SA is ranked amongst the top pipe manufacturing companies in
the Kingdom of Saudi Arabia. Established in the year 2012, UPI-SA has been catering to the
varying needs of different industries of the neighboring countries and various other African
markets. Our promise of premium-grade plastic pipes has helped us expand our client base and
touch new base in other countries in the Middle East as well. We make use of the highest
quality raw materials like Polyethylene (PE) and Polypropylene (PP). Usually, the pressure
pipes are available from 10 to 2000mm diameter, the corrugated wall structured pipes are
available in up to 3500mm diameter; we can offer these pipes as per the specific requirements
of the individual clients.
Located in the King Abdullah Economic City in Rabigh, north of Jeddah City, our company is
manufacturing plastic pipes that can be used for a wide variety of purposes like for irrigation,
sewage, gas distribution, potable water, etc. These pipes can also be used for other applications
like cooling water, sea-water intakes and oilfield applications. The pipes that we manufacture
and supply in the market have undergone several testing processes and are approved by the
various federal and local government departments. We also have an engineering team that
empowers us to offer a variety of site services like on-site welding, pipe installation, and various
other EPC services etc.
Spare Parts Availability
N/A
NOT APPLICABLE
Support Services
N/A
NOT APPLICABLE
Organizational Chart
Integrated Management System (IMS)
Union Pipes Industry
Revision: 01 – 10/06/2017
ANNEXE A
ORGANIZATIONAL CHART
39
Country of Origin
To whom it may concern
Certificate Of Origin
This’s certified that the HDPE pipes & fittings are manufactured and supplied from
the Kingdom of Saudi Arabia (KSA)
National Address:
Building no.3654, Industrial Area Phase 1،
King Abdullah Economic City,
Zip code 23989, addit.no. 6704,
Rabigh, Kingdom Of Saudi Arabia
For on behalf of
Union Pipes Industry LLC.
المملكة العربية السعودية- 0112203005 : هاتف- 11613 الرياض- 90036 ب. ص- مدينة الملك عبدهللا االقتصادية
King Abdullah Economic City - P.O.Box 90036 - Riyadh 11613 - Tel. 011 220 3005 - K.S.A - Email : info@upi-sa.com
Warranty Letter
Warranty Certificate
Union Pipes Industry LLC. declares that our products HDPE-100 pipes sizes ranging
from DN/OD 1200 mm & fittings of same range injection and fabricated including
SDR’s / PN’s manufactured, inspected and tested in accordance with international
standard i.e., EN 12201-2/3, ISO 4427/ DIN 8074-75.
We hereby guaranty and warranty above mentioned products for the period of 50
(fifty) years, under the recommended conditions of norm, appropriate handling,
installation and operating compliances of the products.
For on behalf of
Union Pipes Industry LLC.
المملكة العربية السعودية- 0112203005 : هاتف- 11613 الرياض- 90036 ب. ص- مدينة الملك عبدهللا االقتصادية
King Abdullah Economic City - P.O.Box 90036 - Riyadh 11613 - Tel. 011 220 3005 - K.S.A - Email : info@upi-sa.com
Manufacturing facility details
To whom it may concern
Union Pipes Industry LLC. declares that regarding the Manufacturing facility
details which are two manufacturing plants with around 160 tones daily of HDPE
with size production range 16-1200 mm. PN 6 up to PN 25 or SDR 26 up to SDR
7.3
National Address:
Building no.3654, Industrial Area Phase 1،
King Abdullah Economic City,
Zip code 23989, addit.no. 6704,
Rabigh, Kingdom Of Saudi Arabia
For on behalf of
Union Pipes Industry LLC.
المملكة العربية السعودية- 0112203005 : هاتف- 11613 الرياض- 90036 ب. ص- مدينة الملك عبدهللا االقتصادية
King Abdullah Economic City - P.O.Box 90036 - Riyadh 11613 - Tel. 011 220 3005 - K.S.A - Email : info@upi-sa.com
Quality & HSE Policy
QUALITY & HSE POLICY
Union Pipes Industry (UPI) dedicates itself to providing quality products and
services. Our customers’ satisfaction is ensured by our technical team.
UPI is committed to prevent personnel injury and ill health at the workplace and
prevent environmental pollution, and shall:
Comply with the relevant HSE laws and regulations of KSA and countries of
export as applicable;
Construct, operate, maintain and dispose of our assets in a healthy, safe and
environmentally sound manner;
Communicate this policy to all those working for and on our behalf and advise
them of the individual HSE obligations;
Respond quickly and effectively should any accidents and incidents occur;
Train and encourage all employees to perform their jobs in a safe manner;
UPI shall ensure that outsourced services such are fire extinguisher maintenance,
fire alarm; sprinkler system, waste management etc. meet all legal requirements
regarding occupation health, safety, and environmental issues.
Set and review the HSE objectives and targets which are based on a sound
environmental aspect-impact and risk assessment.
UPI staff, either in groups or as individuals, shall continuously strive to improve
the effectiveness of all their activities at all times.
The Top Management of Union Pipes Industry believes that this Policy should be
reviewed on an annual basis for continuing relevance and to ensure the QHSE
objectives are being positively implemented.