Professional Documents
Culture Documents
Lift Lower
Lift Lower
Units
Rate Representation
Distance of Travel
Frequency
Note: All forces are reported to nearest whole number. v2.0 9/25/02 2002 Thomas E. Bernard
The Lift/Lower Analysis package is an adaptation of the guidance developed by Liberty Mutual Insurance Company. Some values were interpolated to harmonize the higher frequencies. The data were obtained from S. H. Snook and V. M. Ciriello The design of manual handling tasks: revised tables of maximum acceptable weights and forces Ergonomics 34(9):1197-1213, 1991 Job You may enter job name or other descriptive information in the text box. Notes You may enter notes or other descriptive information in the text box. Today Button Pressing this button, enters today's date (from the system date) in the cell above.
Design Goal The Design Goal is the target value that the actual force does not exceed. In practice, it is the force that is 75% Acceptable for Women. Actual Value If actual or estimated values of load are available, they may be entered here. This will allow a reporting of the Percent Acceptable for Men and for Women. Percent Acceptable Percent Acceptable is the estimated portion of the respective population who would find the work demands acceptable. The greater the percent acceptable the lower the presumed risk. 75% Acceptable is a good design goal. For a mixed workforce, this should be 75% acceptable for women. Values for Percent Acceptable can be changed. Contact TEBernard as below.
This work was supported in part by OSHA Salt Lake Technical Center Updates can be obtained from the OSHA web site. Thomas E. Bernard University of South Florida College of Public Health Tampa FL 33612-3805 (813) 974-6629 / tbernard@hsc.usf.edu v2.0 9/25/02 2002 Thomas E. Bernard For updates see Stone Wheels at www.hsc.usf.edu/~tbernard No warranty, explicit or implicit.