Professional Documents
Culture Documents
20230331 - MSDS - FLEXO TECHLAM SP DF INKS
20230331 - MSDS - FLEXO TECHLAM SP DF INKS
20230331 - MSDS - FLEXO TECHLAM SP DF INKS
3. HAZARDS IDENTIFICATION
1
COMBUSTION PRODUCTS
EXPLOSION HAZARDS : Above flash point, vapor-to-air mixtures are explosives if within the flammable
limits noted above. Contact with strong oxidizers may cause fire or explosion
FIRE FIGHTING EQUIPMENTS : Wear full protective equipment and a self-contained breathing
apparatus with the full face piece operated in the pressure demand mode.
Water spray may be used to keep fire-exposed containers
Cool until they can be evacuated.
SENSITIVE TO STATIC : Yes
DISCHARGE
HAZARDOUS DECOMPOSITION : Hazardous polymerization will not occur
Personal precautionary measures : Do not smoke. Keep the product away from all sources of ignition or heat. Ensure
a good ventilation of fresh air. Use protective equipments. Avoid inhalation of
vapours.
Precautionary measures for environmental : Avoid contamination of the drainage system, and subterranean, surface and ground
protection level water.
Neutralising, salvaging and cleaning up : Absorb with sawdust or other absorbent. It is preferable to wash with a detergent,
methods avoid using solvents. Prevent contamination of the water sources, the sewers, the
ground and the vegetation. Keep in tightly closed containers before disposal.
Protect containers against physical damage. Store in a cool, dry, well-ventilated location, away from any area where a
fire hazard may be acute. Containers should be bonded and grounded for transfer to avoid static sparks. Do not
permit smoking in storage areas. Use only non-sparking tools and equipment around the liquid. Empty containers may
be hazardous from residual liquid and vapor. Observe all warnings and precautions listed.
TWA STEL
Ppm mg/m3 Ppm Mg/m3
Ethyl alcohol 1000 1900 -- --
Ethoxy propanol -- -- -- --
n - Propyl Acetate 200 840 -- --
n – Propanol 200 500 -- --
Dowanol PMA -- -- -- --
Engineering Control : Local exhaust ventilation is the preferred means of reducing employee exposure, unless
occupational hygienist has determined that exposure level presents no hazard.
PPE – Respiratory : Use only correctly fitted respirators approved for use with organic Vapors.
PPE – Hand : Use of nitrile gloves recommended
PPE – Eyes : Eye protection against splashes is recommended.
PPE – Skin : Wear cotton overalls when handling
2
9. PHYSICAL AND CHEMICAL PROPERTIES
ACUTE TOXICITY : Over exposure to above solvents may cause fatigue, burning of eyes,
confusion, dizziness’ and drowsiness. Prolonged exposure may cause
unconsciousness
ENVIRONMENTAL : The product should not be allowed to enter drains of water courses of oil
3
15. REGULATORY INFORMATION
Labelling
In accordance with the decree of 21 February 1990, the product is labelled as follows:
Danger symbol F
Risk phrases R11
Recommended precautions S7 - S16 - S23 -S37/39 - S51
Storage and use (classified installations)
South Africa Flammable liquids
Section 1430 Flammable liquid station
Section 1433 Mixing, treatment and usage stations
Section 1434 Filing and distribution stations
SHELF LIFE: 3 to 12 months depending upon the colors* [in unopened containers]
* Non Metallic colors: 12 months & Metallic colors: 3 months
FDA Status: This product when used in food packaging is permitted for INDIRECT printing only. A barrier must exist
between printing and food.
NOTICE:
This information is in accordance with the directives 91/155/EEC, article 10, code 88/379/EEC.
The information complements the technical data instruction sheets, but does not replace them. The information about the product is
given to the best of our knowledge at the date indicated, and in good faith. The user’s attention is drawn to the risks involved if a
product is used other than for its intended purpose.
This list is not to be considered exhaustive and does not exonerate the user from verifying other obligations he may have regarding the
possession and the handling of the products, according to documents other that those listed here.
The Technical Department of HI-TECH INKS remains at the user’s disposal for any further assistance it may be able to give.