Professional Documents
Culture Documents
Appendix D - Material Information
Appendix D - Material Information
1.1 Specification
Compliance Summary
SPECIFICATION COMPLIANCE SUMMARY
5 Fittings EN74
10 Screw Jack EN 39
11 Base Plate EN 39
- CERTIFICATE OF CONFORMITY -
DATE : 23RD MAY 2024
CERTIFICATE No. : LEODXB/1475 –SCAFFOLDING MATERIALS
CLIENT : ACCESS & COATING GULF CO. WLL
PO REF. : 3954
SUPPLIER : LEOPAD DUBAI LLC
DO NO. : 020407
This is to certify that the scaffolding products at LEOPAD DUBAI LLC purchased by ACCESS &
COATING GULF CO. WLL has been manufactured, inspected and tested in accordance with the
specification requirements of the contract or purchase order and conform fully to the standards as
mentioned below:
1. PRE-GALVANIZED STEEL BOARD, SIZE: 38MM X 225MM X 1.5MM X 4.0MTR FULLY 1,200
CONFORMING TO BS EN 12811-1 STD
______________________
QA / QC Executive
File – leopaddxb/qc/scaffolding-mat.
Date: 23/05/2024
Working together
- CERTIFICATE OF CONFORMITY -
DATE : 23RD MAY 2024
CERTIFICATE No. : LEODXB/1474 –SCAFFOLDING MATERIALS
CLIENT : ACCESS & COATING GULF CO. WLL
PO REF. : 3537 REV 01
SUPPLIER : LEOPAD DUBAI LLC
DO NO. : 020258
This is to certify that the scaffolding products at LEOPAD DUBAI LLC purchased by ACCESS &
COATING GULF CO. WLL has been manufactured, inspected and tested in accordance with the
specification requirements of the contract or purchase order and conform fully to the standards as
mentioned below:
1. HOT DIPPED GALVE. SCAFFOLD TUBE WITH MARKING EVERY 1MTR LENGTH, SIZE: OD 150
48.3MM X T 4.0MM X 4.0MTR LONG FULLY COMPLIANCE TO EN 39 STANDARD
2. HOT DIPPED GALVE. SCAFFOLD TUBE WITH MARKING EVERY 1MTR LENGTH, SIZE: OD 100
48.3MM X T 4.0MM X 3.5MTR LONG FULLY COMPLIANCE TO EN 39 STANDARD
3. HOT DIPPED GALVE. SCAFFOLD TUBE WITH MARKING EVERY 1MTR LENGTH, SIZE: OD 450
48.3MM X T 4.0MM X 3.0MTR LONG FULLY COMPLIANCE TO EN 39 STANDARD
4. HOT DIPPED GALVE. SCAFFOLD TUBE WITH MARKING EVERY 1MTR LENGTH, SIZE: OD 100
48.3MM X T 4.0MM X 2.5MTR LONG FULLY COMPLIANCE TO EN 39 STANDARD
5. HOT DIPPED GALVE. SCAFFOLD TUBE WITH MARKING EVERY 1MTR LENGTH, SIZE: OD 75
48.3MM X T 4.0MM X 2.0MTR LONG FULLY COMPLIANCE TO EN 39 STANDARD
6. HOT DIPPED GALVE. SCAFFOLD TUBE WITH MARKING EVERY 1MTR LENGTH, SIZE: OD 200
48.3MM X T 4.0MM X 1.5MTR LONG FULLY COMPLIANCE TO EN 39 STANDARD
7. HOT DIPPED GALVE. SCAFFOLD TUBE WITH MARKING EVERY 1MTR LENGTH, SIZE: OD 70
48.3MM X T 4.0MM X 1.0MTR LONG FULLY COMPLIANCE TO EN 39 STANDARD
8. DROP FORGED BOARD RETAING COUPLER (BRC) - ZINC PLATED/ELECTRO GALVANIZED, 700
FULLY CONFORMING TO BS1139 STD
9. SQUARE RUNG SINGLE POLE ALUMINIUM LADDER (STRAIGHT TYPE) – 5.0M – COMPLY TO BS 20
EN 131 STANDARD. STATIC VERTICAL LOAD: 150KG
(Page 1 of 2)
10. SQUARE RUNG SINGLE POLE ALUMINIUM LADDER (STRAIGHT TYPE) – 4.0M – COMPLY TO BS 25
EN 131 STANDARD. STATIC VERTICAL LOAD: 150KG
______________________
QA / QC Executive
File – leopaddxb/qc/scaffolding-mat.
Date: 23/05/2024
(Page 2 of 2)
P A D
LE O
P A D
L E O
P A D
LE O
P A D
L E O
P A D
L E O
PA D
LE O
Working together
- CERTIFICATE OF CONFORMITY -
DATE : 25TH SEPTEMBER 2023
CERTIFICATE No. : LEODXB/1397 –SCAFFOLDING MATERIALS
CLIENT : ACCESS & COATING GULF CO. WLL
PO REF. : 3131
SUPPLIER : LEOPAD DUBAI LLC
DO NO. : 019862
This is to certify that the scaffolding products at LEOPAD DUBAI LLC purchased by ACCESS &
COATING GULF CO. WLL has been manufactured, inspected and tested in accordance with the
specification requirements of the contract or purchase order and conform fully to the standards as
mentioned below:
1. PRE-GALVANIZED STEEL BOARD, SIZE: 38MM X 225MM X 1.5MM X 4.0MTR FULLY 100
CONFORMING TO BS EN 12811-1 STD
2. PRE-GALVANIZED STEEL BOARD, SIZE: 38MM X 225MM X 3.0M FULLY CONFORMING TO BS 100
EN 12811-1 STD
3. PRE-GALVANIZED STEEL BOARD, SIZE: 38MM X 225MM X 2.5M FULLY CONFORMING TO BS 100
EN 12811-1 STD
4. PRE-GALVANIZED STEEL BOARD, SIZE: 38MM X 225MM X 2.0M FULLY CONFORMING TO BS 100
EN 12811-1 STD
5. PRE-GALVANIZED STEEL BOARD, SIZE: 38MM X 225MM X 1.5M FULLY CONFORMING TO BS 100
EN 12811-1 STD
6. PRE-GALVANIZED STEEL BOARD, SIZE: 38MM X 225MM X 1.0M FULLY CONFORMING TO BS 100
EN 12811-1 STD
(Page 1 of 2)
10. DROP FORGED BOARD RETAING COUPLER (BRC) - ZINC PLATED/ELECTRO GALVANIZED, 5,000
FULLY CONFORMING TO BS1139 STD
1,000
11. PRESSED STEEL LADDER CLAMP
______________________
QA / QC Executive
File – leopaddxb/qc/scaffolding-mat.
Date: 25/09/2023
(Page 2 of 2)
COC/1391
-ORIGINAL-
- CERTIFICATE OF CONFORMITY -
DATE : 06TH SEPTEMBER 2023
CERTIFICATE No. : LEODXB/1391 –SCAFFOLDING MATERIALS
CLIENT : ACCESS & COATING GULF CO. WLL
PO REF. : 3131
SUPPLIER : LEOPAD DUBAI LLC
DO NO. : 019845
This is to certify that the scaffolding products at LEOPAD DUBAI LLC purchased by ACCESS &
COATING GULF CO. WLL has been manufactured, inspected and tested in accordance with the
specification requirements of the contract or purchase order and conform fully to the standards as
mentioned below:
1. GI TUBE, SIZE: 48.3MM X 4.0MM X 0.5MTR, GALV FULLY COMPLIANCE TO EN 39 STANDARD 1,500
2. GI TUBE, SIZE: 48.3MM X 4.0MM X 1.5MTR, GALV FULLY COMPLIANCE TO EN 39 STANDARD 300
3. GI TUBE, SIZE: 48.3MM X 4.0MM X 2.0MTR, GALV FULLY COMPLIANCE TO EN 39 STANDARD 250
4. GI TUBE, SIZE: 48.3MM X 4.0MM X 4.0MTR, GALV FULLY COMPLIANCE TO EN 39 STANDARD 200
5. GI TUBE, SIZE: 48.3MM X 4.0MM X 6.0MTR, GALV FULLY COMPLIANCE TO EN 39 STANDARD 100
6. DROP FORGED SWIVEL COUPLER – ZINC PLATED, FULLY CONFIRMING TO EN74-1 CLASS: A 5,000
STANDARD
7. SQUARE RUNG SINGLE POLE ALUMINIUM LADDER (STRAIGHT TYPE) – 4.0M – COMPLY TO BS 50
EN 131 PART 1 & PART 2 STANDARD. STATIC VERTICAL LOAD: 150KG
8. SQUARE RUNG SINGLE POLE ALUMINIUM LADDER (STRAIGHT TYPE) – 3.0M – COMPLY TO BS 50
EN 131 PART 1 & PART 2 STANDARD. STATIC VERTICAL LOAD: 150KG
9. LVL BOARD 38MM X 225MM X 3.9MTR - OSHA (29 CFR 1926.451) 2,950
For LEOPAD DUBAI LLC,
______________________
QA / QC Executive
File – leopaddxb/qc/scaffolding-mat.
Date: 06/09/2023
LEOPAD DUBAI LLC
NO.16, 42ND STREET, JEBEL ALI IN. AREA 1. P.O. BOX 114992, DUBAI, U.A.E
This report is to certify the subject LVL scaffold planks*, with respect to meeting the strength requirements of
the U.S. Department of labour, Occupational Safety and Health Administration(OSHA).
One size of scaffold plank (38mm×225mm, thickness × width) has been assessed in accordance with the
following requirements:
OSHA, Standard 29 CFR 1926.451 (a) (1):
Each Scaffold shall be capable of supporting, without failure, its own weight and at least 4 times the
Maximum intended load applied or transmitted to it.
OSHA, Standard 29 CFR 1926.451 (f) (16):
Platform shall not deflect more than 1/60 of the span when loaded.
The maximum spans determined by client and verified by SGS for standardized live loads in accordance with
OSHA, Standard 29 CFR 1926.451 and Subpart L, Appendix A are as follows:
Signed for
SGS-CSTC Standards Technical
Services Co., Ltd. Xiamen Branch
Testing Center
P A D
L E O
P A D
L E O
PA D
LE O
P A D
L E O
PA D
LE O
TEST REPORT
REPORT NO. LC 1001/LD-01 TEST TYPE : SLIP TEST (BS
1139:2002)
DESCRIPTION OF GOODS LADDER CLAMP
SURFACE OF FINISHING ELECTRO PLATING/GALVANIZED
DATE 05TH SEPTEMBER 2023 SPEC OF 48.3 MM
LOT SIZE 10,000PCS LOAD L= 6KN
PAGE 01
SR NO DATE OF SAMPLES ATL1 IN ATL2 IN SIDE ULTIMATE REMARK
INSPECTION MM MM LOAD
APPLIED IN
KN (KN)
1. 03/09/2023 SAMPLE 1 - - - OK
2. 03/09/2023 SAMPLE 2 - - - OK
3. 03/09/2023 SAMPLE 3 - - - OK
______________________
QA / QC Executive
File – leopaddxb/qc/scaffolding-mat.
Date: 05/09/2023
Working together
This report is to certify the subject LVL scaffold planks*, with respect to meeting the strength requirements of
the U.S. Department of labour, Occupational Safety and Health Administration(OSHA).
One size of scaffold plank (38mm×225mm, thickness × width) has been assessed in accordance with the
following requirements:
OSHA, Standard 29 CFR 1926.451 (a) (1):
Each Scaffold shall be capable of supporting, without failure, its own weight and at least 4 times the
Maximum intended load applied or transmitted to it.
OSHA, Standard 29 CFR 1926.451 (f) (16):
Platform shall not deflect more than 1/60 of the span when loaded.
The maximum spans determined by client and verified by SGS for standardized live loads in accordance with
OSHA, Standard 29 CFR 1926.451 and Subpart L, Appendix A are as follows:
Signed for
SGS-CSTC Standards Technical
Services Co., Ltd. Xiamen Branch
Testing Center
In the initial days of ACG inception, ACG and MCSC had an MOU for the sharing of the resources.
Due to this, initial ACG procurement activities were carried out by MCSC.
The PO copies enclosed as proof of ownership is that of MCSC but the items were procured for
ACG and are the assets of ACG.
Working Together
Working together
- CERTIFICATE OF CONFORMITY -
DATE : 03RD FEBRUARY 2024
CERTIFICATE No. : LEODXB/1430 –SCAFFOLDING MATERIALS
CLIENT : ACCESS & COATING GULF CO. WLL
PO REF. : PO-807479
SUPPLIER : LEOPAD DUBAI LLC
This is to certify that the scaffolding products at LEOPAD DUBAI LLC purchased by ACCESS &
COATING GULF CO. WLL has been manufactured, inspected and tested in accordance with the
specification requirements of the contract or purchase order and conform fully to the standards as
mentioned below:
1. DROP FORGED SWIVEL COUPLER - ZINC PLATED FULLY CONFIRMING TO EN74-1 CLASS A 3,500
STANDARD
2. BASE PLATE, PLATE SIZE :- 150 MM X 150 MM X 5 MM THICKNESS ROD - 12 MM DIA X 100 1,000
MM H FINISHING = PAINTED
3. PRESSED STEEL SLEEVE COUPLER/JOINT BOX - ZINC PLATED FULLY CONFORMING TO EN-74 1,000
CLASS B STADARD
4. DROP FORGED GIRDER COUPLER/BEAM CLAMP FIXED - ZINC PLATED FULLY CONFORMING 500
TO BS1139/AS 1576 STANDARD
5. SCAFFOLD LADDER BEAM ( SADDLE RUNG - PLAIN END WITHOUT SPIGOT) AS PER BS 1139 20
STANDARD HDG SIZE :- 48.3 MM X 4.0 MM X 6.0 MTR LENGTH
6. LVL BOARDS - OSHA PROOF TESTED LAMINATED BOARD (LAMINATED VENEER LUMBER) AS 3,700
PER OSHA STANDARD SIZE :- 38 MM X 225 MM X 3.90 MTR
7. CASTOR WHEEL SCAFFOLD CASTOR WHEEL 8" - RUBBER WHEEL COME WITH HAND AND 40
PEDAL BRAKE MALE TYPE STATIC LOAD :- 800 KGS STATIC AND TESTED UP TO 1000 KGS
BRAND :- REXELLO INDIA
8. SCAFFOLD WOODEN LADDER 3.00 AS PER BS 1129 STANDARD (ACTUAL LENGTH - 2.96MTR) 30
9. SCAFFOLD WOODEN LADDER 4.00 AS PER BS 1129 STANDARD (ACTUAL LENGTH - 3.92MTR) 50
(Page 1 of 2)
10. SCAFFOLD WOODEN LADDER 5.00 AS PER BS 1129 STANDARD (ACTUAL LENGTH - 4.93MTR) 60
11. SCAFFOLD WOODEN LADDER 6.00 AS PER BS 1129 STANDARD (ACTUAL LENGTH - 5.95MTR) 50
______________________
QA / QC Executive
File – leopaddxb/qc/scaffolding-mat.
Date: 03/02/2024
(Page 2 of 2)
Access & Coating Gulf Co. W.L.L
Office No.15, Building 1476,
Road 4630, Block 646, Nuwaidrat,
Kingdom of Bahrain. P.O Box – 80431.
Tel.: +973 1721 2471 Fax.: +973 1721 2473
Email.: acgbahrain@access-coating.com
www.access-coating.com
CR No.: 125230
In the initial days of ACG inception, ACG and MCSC had an MOU for the sharing of the resources.
Due to this, initial ACG procurement activities were carried out by MCSC.
The PO copies enclosed as proof of ownership is that of MCSC but the items were procured for
ACG and are the assets of ACG.
Working Together