Professional Documents
Culture Documents
AI152986481607en 000303
AI152986481607en 000303
Features
Pressure compensator/load sensing Angle sensor • Also available with other common
pump with electronic torque limiting • Measures real time swashplate angle control configurations (PC, PC/LS, RP,
control (PC/LS with ETL) ON/OFF)
(displacement) of the pump with high
• Available in 12/24 volt configurations • IP67 and IP69K Rating with a 4 pin
resolution
• Normally closed control (NC), removal • DEUTSCH connector
Proven hardware with no interference
• Same package size as current electrical
of signal to control or angle sensor parts
• controls
defaults system to regular PC/LS Redundant (dual) integrated sensors
functionality, allows for maximum ‒ Improved measurement accuracy
uptime ‒ Easy sensor fault detection
• Similar hardware configuration as • ®
PLUS+1 compliance block Comprehensive technical literature is
online at www.danfoss.com
current electric controls ‒ Easy calibration of sensor and
• Can be easily implemented into PC/LS diagnostics
systems
Technical specifications
Frame J
43.5 42.5
[1.71] [1.67]
P108777
Frame F
86.8 94.1
[3.42] [3.7]
36.9 36
[1.45] [1.42]
approximate
36.9 36 122.4 wire length
[1.45] [1.42] [4.82] 131.5
[5.18]
43.2
[1.7]
110.7
[4.36]
P108778
36
[1.42]
36
[1.42]
Outlet port (120)
([4.39])
approximate
59.4 wire length
[2.34] 131.5 [5.18]
126.9
[5] P108835
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.