Professional Documents
Culture Documents
5010475-Q11115 - Quotation
5010475-Q11115 - Quotation
5010475-Q11115 - Quotation
Shipping Billing
1
Winnipeg Processing Centre QUOTE Q11115
1510 Clarence Ave 5/6/2024
Winnipeg, Manitoba R3T1T6
Phone : 204-475-8584 winsorderdesk@russelmetals.com
Terms and Conditions
Equipment Tolerances:
Plasma
1/16" radius added at all corners
≤2" Thick - ±1° on edge squareness
>2" Thick - ±2° on edge squareness
Part Length / Profile (≤ 1" Thick):
- 0" - 240" ±0.06"
- 240" - 488" ±0.125"
Part Length / Profile (>1" ≤ 2" Thick):
- 0" - 40" ±0.06"
- 40"-100" ±0.09"
- 100"-up ±0.125"
Part Length / Profile (>2" Thick):
- Tolerances are 2x (>1" ≤ 2" Thick) listed above.
Machining Tolerances:
Location: ±0.030
Feature: ±0.010
Location from Plasma edge - subject to plasma tolerances above.
Flame
±0.06 on profile ±0.125 on length over 240" ±1⁰ on edge squareness.
Parts from 2" - 4" thick: tolerances are 1.5x stated.
Parts >4" thick: tolerances are 2x stated.
Brake
±0.06" on formed dimensions, ±0.03" per bend (for formed dimensions over two bends), ±2° on bend angles.
Surface condition critical if noted on supplied prints.
Inside bend radii will be adjusted to material thickness if specified at less than or not identified on supplied drawing.
Drill
±0.06" on diameter.
Saw
Single Piece: ±0.06" on length, ±2° on angle.
Bundle Cut ±0.12" on length, ±5° on angle
Weld
±0.06" on locations.