Professional Documents
Culture Documents
PL-02 - How To Work at A Height
PL-02 - How To Work at A Height
PL-02 - How To Work at A Height
POTENTIAL HAZARDS
TOOLS /
Conditions or Actions Which RECOMMENDED SAFE PROCEDURES
KEY JOB PROCESS STEPS MATERIALS S/P RISK
Could Cause an Injury / Affect Personal Protective Devices Special Clothing Procedures
USED
Health
1. Inspect equipment to be used as Supporting Injury to finger or hand, 1A L Ensure that all equipments to be used are in good
a support or work platform equipment caught by pinch points. condition.
Safety belt or riding belt must be inspected carefully.
Use only certified and colour coded slings.
2. Put guard rails or lines around Guard rails Injury to fingers, if caught 1A L Be sure that guard rails are fully secured with the
structure used for working up between guard rails and working equipments.
high structure. When possible, provide guard rails around the
equipment, if not installed earlier.
3. Raise the man with working Work platform Falling from height. 4B M Ensure that the hoisting system and the working
platform with the hoisting and hoisting Injury to personnel with the platform are inspected and certified before use.
system equipment tool, if falls from a height. Be sure that hoisting equipment and its brake is
Injury to personnel, if working properly.
caught between work Wear all PPE such as safety belt at all times without
platform and hard exception.
obstruction above. Secure all tools in the working platform to prevent
falling from height.
Use tag line to control swing and guide the work
platform
Do not give any jerk to the lifting line.
4. Start the job assigned to you Work platform Slipping and falling from 4B M Be sure that you do not feel dizziness.
and tools heights, if safety belt is not Do not work at height in bad weather unless the work
worn is vital.
Be sure that work area is free from slipping and
tripping hazards.
767776500.doc Page 1 of 2
POTENTIAL HAZARDS
TOOLS /
Conditions or Actions Which RECOMMENDED SAFE PROCEDURES
KEY JOB PROCESS STEPS MATERIALS S/P RISK
Could Cause an Injury / Affect Personal Protective Devices Special Clothing Procedures
USED
Health
5. Lower the work support Work platform Injury to fee, if caught 2B M Make sure that no tool is left on top and all tools are
equipments after finishing the and hoist between floor and secured properly.
job equipment. Guide the work platform and control the swing with
Injury to personnel, if tag line.
struck in a confined space Do not keep your feet under work platform while
while lowering equipment keeping on the floor
down.
6. Keep equipment and tools in Tools & Injury to fingers during 1A L Be sure that tools are well cleaned and no tool is
the proper place support cleaning and storing missing.
equipment Keep all tools, safety belt, work support equipment,
and lifting slings at the proper place.
767776500.doc Page 2 of 2