Professional Documents
Culture Documents
Checksheets & Guide
Checksheets & Guide
Checksheets & Guide
Rmrks
Item Chk Code Description
STEP 1: PREPARATION
1.01 ____ ____ Review American Navion Society Video Maintenance Seminar Series
One "The Annual."
1.02 ____ ____ Review AD's and Type Certificate equipment lists.
1.03 ____ ____ Review Navion Service Manual and Parts Manual.
5.06 ____ ____ Check fuel selector valve for leaks, cleanliness, ease of operation
and proper placard.
5.07 ____ ____ Check baggage compartment, underseat, and wingtip auxiliary tanks
and valves (if installed).
5.08 ____ ____ Check fuel gauge sending units (in tanks) for leaks or stains.
5.09 ____ ____ Verify operation of fuel gauges.
5.10 ____ ____ Check fuel tank vents.
STEP 6: WINGS
6.01 ____ ____ Skin: Check for loose rivets and corrosion.
6.02 ____ ____ Inspect wings with flaps extended. Inside surfaces should be free of
dirt, debris and corrosion. Check hydraulic lines.
6.03 ____ ____ Check control mechanisms for cotter pins. Check aileron balance
weights.
6.04 ____ ____ Ailerons and flaps: Check control cables for condition, correct routing
and tension.
6.05 ____ ____ Check bolts and bushings for wear.
6.06 ____ ____ Check condition of electrical wiring.
6.07 ____ ____ Check rigging of ailerons and flaps and that aileron trim tab is not
bent to extreme angle.
7.15 ____ ____ Check heater for ease of operation of controls and for functioning of
blower.
7.16 ____ ____ Check cabin air intake and cabin air exhaust controls for operation.
Make sure vents are clear of debris.
7.17 ____ ____ Check all external fairings to ensure security.
STEP 8: EMPENNAGE
8.01 ____ ____ Check skin for corrosion and for loose rivets.
8.02 ____ ____ Check freedom of movement of flight controls.
8.03 ____ ____ Lube pulleys and check bolts for cotter pins and safety wires.
8.04 ____ ____ Check trim tabs for proper alignment.
8.05 ____ ____ Make sure vertical fin top fairing and fuselage fairings are secure and
without cracks.
9.16 ____ ____ Observe anti-collision (beacon) and strobe lights, if installed, for
proper operation and check to see if they introduce noise into the
radios.
9.17 ____ ____ Check physical mounting of avionics.
9.18 ____ ____ Check operation of cooling fan (if installed) or make sure avionics
vents are clear.
15.01 ____ ____ Per applicable FAA regulations, enter the inspection work performed
in the:
A. Airplane Logbook.
B. Engine Logbook.
C. Propeller Logbook.
15.02 ____ ____ Have owner / pilot preflight and fly airplane, perform maintenance
check and enter in log.
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________