Professional Documents
Culture Documents
Impreza - Crosstrek 24my Pubno - G1520ge Version - 002
Impreza - Crosstrek 24my Pubno - G1520ge Version - 002
1. —
DTC detecting condition:
Immediately at fault recognition
Trouble symptom:
Poor driving performance
Knocking occurs
Failure detection pattern:
“Primary” (high-priority diagnosis)
Warning light / indicator light:
Malfunction indicator light
Wiring diagram:
Engine Electrical System Ref. to WIRING SYSTEM(EXCEPT FOR HEV)>Engine Electrical
System>WIRING DIAGRAM > 2.0 L MODEL.
E66 E67
1
1 2
B: E53
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18 19 20 21 22 23 24 25 26 79 80 81 82 83 84 85 86 87
88 89 90 91 92 93 94 95 96
B18
B19
B16
27 28 29 30 31 32 33 34 35 36 37 38 39
B5
B6
KNKR
KNKL-
KNKL
KNKSLD
B: E53 ECM
EN-25501
Caution:
Use the check board when measuring the ECM terminal voltage and resistance. Ref. to
ENGINE (DIAGNOSTICS)(H4DO 2.0)>General Description>PREPARATION TOOL > HOW TO
USE CHECK BOARD.
Note:
After the faulty parts are repaired or replaced, perform the final check in Basic Diagnostic
Procedure. Ref. to ENGINE (DIAGNOSTICS)(H4DO 2.0)>Basic Diagnostic
Procedure>PROCEDURE.
no
1. BASIC
INSPECTION. Go to 5.
yes
2. CHECK no
HARNESS (OPEN
Go to 5.
CIRCUIT AND
SHORT BETWEEN
LINES IN KNOCK
SENSOR RH
SIGNAL LINE).
yes
3. CHECK no
HARNESS (OPEN
Go to 5.
CIRCUIT IN
KNOCK SENSOR
RH GROUND
WIRE).
yes
no
4. CHECK KNOCK
SENSOR. Go to 5.
yes
1. BASIC INSPECTION.
Before performing the diagnosis, perform basic inspection. Ref. to ENGINE (DIAGNOSTICS)
(H4DO 2.0)>General Description>INSPECTION.
Note:
Check the battery and its installation condition.
Check the related fuse.
Visually check that the related connectors are properly connected.
Also, check the related ground terminal for looseness and corrosion.
Go to 2.
Yes
Yes Go to 3.
Go to 4.
Yes
Check the knock sensor RH. Ref. to FUEL INJECTION (FUEL SYSTEMS)(H4DO(EXCEPT FOR
HEV))>Knock Sensor>INSPECTION.
Yes Replace the ECM. Ref. to FUEL INJECTION (FUEL SYSTEMS)(H4DO(EXCEPT FOR
HEV))>Engine Control Module (ECM).
After replacement, Go to 5.
No Replace the knock sensor RH. Ref. to FUEL INJECTION (FUEL SYSTEMS)
(H4DO(EXCEPT FOR HEV))>Knock Sensor.
After replacement, Go to 5.
5. CHECK REPAIR.
GENERAL DESCRIPTION
OUTLINE OF DIAGNOSIS
Detect the open or short circuit of knock sensor.
Judge as NG if out of specification.
COMPONENT DESCRIPTION
(1)
(4)
(A)
(2)
(3)
EN-24626
EXECUTION CONDITION
Secondary parameters Execution condition
None
DIAGNOSTIC METHOD
If the duration of time while the following conditions are met is longer than the time indicated, judge
as NG.
Judgment value
Malfunction Criteria Threshold Value
Output voltage 4.541V or more