Professional Documents
Culture Documents
Article - CS52452 - How To Improve Performance For Large Assembly by Decreasing Display Quality in Creo Parametric
Article - CS52452 - How To Improve Performance For Large Assembly by Decreasing Display Quality in Creo Parametric
com/en/support/article/CS52452
Article - CS52452
How to improve performance for large assembly by decreasing display quality in Creo Parametric
Modified: 27-Dec-2021
Applies To
Description
Resolution
blended_transparency no Transparent colors will appear using alpha blending or not when the model is shaded
spin_with_part_entities no Datum features will not display during dynamic spinning of a model.
edge_display_quality low Control display quality of an edge for wireframe and hidden-line removal
fasthlr yes Specifies whether fast hidden line removal is on/off by default
Use simplified highlighting which redisplays more quickly at the expense of certain
fast_highlight yes
details
Determines whether or not the system uses Level of Detail in shaded models during
lods_enabled no
dynamic orientation (panning, zooming and spinning)
open_simplified_rep_by_default yes Retrieves a model in specified representation. Yes - uses Open Rep dialog
Determines if the display of an object currently on the screen is kept in memory when
retain_display_memory yes
you quit the window
Model shade quality is used to decide how much to subdivide surfaces for shading
shade_quality 1
purposed. This option is added starting at Wildfire 5.0
skip_small_surfaces yes Gives the user the option not to display small shaded surfaces