Professional Documents
Culture Documents
Watermarked LR23329564WA Appendix
Watermarked LR23329564WA Appendix
py
Type Steel Making
Semi-Finished Products
Co
Hot Rolled Coil
Plates ed
This approval is subject to compliance with the Rules for the Manufacture, Testing and Certification of
Materials. The full details of the processes and grades to which this approval applies are given on
subsequent pages of this certificate.
d
This certificate is issued to the named manufacturer, and is valid until the expiry date specified. Lloyd’s
Register is to be notified of any change that may affect the validity of this certificate, and reserves the
right to cancel or withdraw this certificate.
oa
nl
w
Do
Li Xu
Metallurgy Team - Lead Specialist to Lloyd's
71 Fenchurch Street, London, EC3M 4BS, United Register EMEA
Kingdom A member of the Lloyd's Register group
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively,
referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or
expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the
relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms
and conditions set out in that contract.
LM01 2.0
Page 2 of 4
Certificate No: LR23329564WA
Issue Date: 13/07/2023
Expiry Date: 12/07/2026
py
Products
- - Highrer Strength 300.00 mm
- - Normal Strength 300.00 mm
- - 9Ni 300.00 mm
Co
Plates Normal Strength Grades Maximum Thickness Units
TM+Acc Fine Grain Al+Nb+Ti E, D, B, A 100.00 mm
Normalized Fine Grain Al E, D, B, A 80.00 mm
As Rolled Fine Grain Al B,A 70.00 mm
As Rolled Fine Grain Al D
ed 35.00 mm
Plates Higher Strength Grades Maximum Thickness Units
TM+Acc Fine Grain Al DH36, AH36, DH32, 30.00 mm
AH32, DH27S, AH27S
d
TM+Acc Fine Grain Al+Nb+Ti EH36, DH36, AH36, 100.00 mm
EH32, DH32, AH32,
EH27S, DH27S, AH27S
oa
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively,
referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or
expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the
relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms
and conditions set out in that contract.
LM01 2.0
Page 3 of 4
Certificate No: LR23329564WA
Issue Date: 13/07/2023
Expiry Date: 12/07/2026
py
EH27S, DH27S, AH27S
Plates Crack arrest steel Grades Maximum Thickness Units
TM+Acc Fine Grain Al+Nb+Ti EH47-BCA1 , EH40- 90.00 mm
BCA1
Co
Plates Ferritic Low Grades Maximum Thickness Units
Temperature
TM+Acc Fine Grain Al+Nb+Ti LTFH36, LTEH36, 40.00 mm
LTDH36, LTAH36,
LTFH32, LTEH32,
ed
LTDH32, LTAH32,
LTFH27S, LTEH27S,
LTDH27S, LTAH27S
Hot Rolled Coil Normal Strength Grades Maximum Thickness Units
d
Thermo Mechanical Fine Grain Al D, B, A 22.00 mm
As Rolled Fine Grain Al D, B, A 12.00 mm
oa
Vessel
As Rolled Fine Grain Al 410AR , 360AR 35.00 mm
Normalizing Rolled Fine Grain Al 510FG, 490FG, 460FG, 20.00 mm
w
410FG, 360FG
Normalizing Rolled Fine Grain Al+Nb+V+Ti 510FG, 490FG, 460FG, 35.00 mm
410FG, 360FG
Normalized Fine Grain Al 410FG , 360FG 80.00 mm
Do
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively,
referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or
expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the
relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms
and conditions set out in that contract.
LM01 2.0
Page 4 of 4
Certificate No: LR23329564WA
Issue Date: 13/07/2023
Expiry Date: 12/07/2026
py
Plates Low Temperature Grades Maximum Thickness Units
Quenched and - 9Ni 50.00 mm
Tempered
Co
Additional Remarks
Approved for semi-finished products, slabs, nominal 1750mm wide x 6000mm long.
Hot rolled coils in normal strength grades in the supply condition thermomechanical fine grain aluminium are
restricted to the thickness ranges >12 to 22mm.
Approved for Austenitic-Manganese Steel plates with the maximum thickness of 30mm for LR approved LNG
Application. LR document MAT/3086/LH29006560 V.01 refers.
ed
The weldability test for EH47, AH62, AH69, DH62, DH69, EH62, EH69 and FH27S, FH32, FH36, FH40 has been carried
out in as weld condition only.
Small scale testing method for crack arrestability assesment for BCA grades is approved as attached letter
Approval of 9Ni with specified minimum Al 0.010%.
d
oa
nl
w
Do
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively,
referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or
expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the
relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms
and conditions set out in that contract.
LM01 2.0