Professional Documents
Culture Documents
CRT Starbars - Profile - January 2023
CRT Starbars - Profile - January 2023
January 2023
Overview of CRT Manufacturing
1
CRT Manufacturing is a home-grown patent inventor of non-
metallic construction materials that seek to alter the landscape of
the construction industry.
Cheaper by 15%
Non-corrosive compared to steel
2
With rising cost of construction and further emphasis towards
ESG practices within companies, CRT is at the forefront of
leveraging on this progress to assist clients achieve their goals
3
We currently focus on 3 types of productions, with the
opportunity to expand to others in the future
Straight Bars Mesh Bars Shape Bars
Application towards other huge market products are also available for CRT to explore in the future
Light poles Window/door frames Telco towers Oil & gas pipes
4
There are only 5 patented manufacturers in the world and CRT is
the only one from South East Asia
5
Composite material has been developed for more than 120 years,
while CRT began our pilot production in 2011
Product History and Development
EPOXY STARBAR™
BLACK STEEL GALVANIZED STAINLESS
COATED COMPOSITE
• Most basic rebar • Black steel with • Black steel with • Contains a • Corrosion resistance
• Less expensive epoxy hot-dip minimum of 12%
• 2x higher tensile
• Coating to • Galvanized of Chromium
• Uncoated strength than steel
protect against coating • Corrosion
• 25% the weight of
• Corrodes corrosion resistance
• Better corrosion black steel
• Life expectancy: • More expensive resistance as • More expensive
• Impervious to
20 years than black steel coating are not than galvanized
chemical
• Life expectancy: easily damaged rebar
• Non-conductive to
30 years • More expensive • Life expectancy:
thermal and electrical
than epoxy 75 years
coated rebar • Life expectancy: 100+
years
• Life expectancy:
40 years
7
There is an increase in motivation and interest to use
nonmetallics in construction where asides cost reduction,
reducing carbon footprint and emissions is as attractive
8
Various tests conducted in collaboration with prominent
organisations and institutions to ensure that our product is of
international standards
Tensile Test (ASTM D 7205) Bond (ACI 440.3R-04 B.3) Shear (ASTMD7617/D7617M)
Result: Aveg 1100mpa Result: Aveg 10mpa Result: Aveg 160 mpa
Strength (80% of Tensile) Strength (40% of Tensile)
9
Typical comparison between Starbar and conventional steel was
made with Lab Geonamic, an accredited centre by IJM and Sunway
Starbars
Twice
stronger
Conventional BRC
10
Bending behaviour towards concrete beams using steel and
Starbars was done in UPM under Prof Madya Dr Ir Farah Norah
and Dr Izlan Abd Karim Failure Point
Concrete beam
WITHOUT
any reinforcement 30KN
Concrete beam
with ductile steel
reinforcement 50KN
12
Further collaboration and recognition from UiTM
www.uitm.edu.my www.uitm.edu.my
Institut Institut
Kejuruteraan Kejuruteraan
Infrastruktur dan Infrastruktur dan
Pengurusan Mampan (IIESM) Pengurusan Mampan (IIESM)
Surat Kami : 100 – (IIESM 1/8) Surat Kami : 100 – (IIESM 1/8)
Tarikh : 3 August 2021 Tarikh : 4 August 2021
13
After multiple rounds of syndications with each well regarded
bodies, CRT has successfully obtained the certifications required
to comply with all the necessary standards and requirements
14
Various dialogues were held with Standards Malaysia which
resulted to a successful formation of a technical committee on
Code of Practice for Design of Concrete Structure using FRP
15
By using Starbars, it has been calculated that it will help reduce
up to 70% of carbon emission compared to using conventional
steel
18% and 70% reduction of CO2 Emission during manufacturing and
construction period compared to conventional Steel based prestressed concrete.
18%
70%
Source: Key Engineering Materials ISSN 1662.9795, Vol 517, 00724-729, Carbon Footprint Analysis of FRP
Incorporated Pedestrian Bridges : A case Study 2012
16
Within just 2 years - Up to date (end 2022) CRT has completed
112 projects for 54 developers/contractors around Malaysia
17
Typical applications of the material within the projects of the
companies mentioned include infrastructure, low rise and high rise
Infrastructure Low Rise High Rise
19
The two founders of CRT has more than 50 years of experience in
various fields, with the culmination of it being the inventors of
Starbars
Ong Kian Fatt (Steven) Huang Mei Si
Founder/Managing Director Technical & Sales Director/Executive Director
• Principal partner
and co-founder of
• 38 years of CRT
experience and
• Designer &
knowledge in the
innovator behind
construction
STARBAR
industry coupled
with extensive • Has been an
research experience active & strong
advocate in the
• Became a land and
adoption of
real estate appraiser
composite
within the building
reinforcement
and construction
material
industry
• Spent many years in the Aviation and Security • Graduated with Bachelor of Science (BSc) (First
industry specializing in high-altitude platform Class Honours) in Computing Studies from
services University of Northumbria, United Kingdom
• Valedictorian Award Winner 2007 and Super
Achiever Scholar of 2007 at the university.
20
Thank You
CRT Manufacturing
21