Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Pub.

DS13310-201

GAI-TRONICS® CORPORATION
A HUBBELL COMPANY

Model 13310-201 Explosion-proof Driver

General Information
This data sheet applies to the GAI-Tronics Model 13310-201 Explosion-proof Driver, which is rated for 30
watts. It has a 16-ohm impedance, and if used alone, connects to the 16-ohm amplifier output tap. If two
drivers are used, connect in parallel to the 8-ohm amplifier output tap.

The installation of explosion-proof speakers must conform with regulations governing electrical equipment
for hazardous locations and the provisions of the National Electrical Code.
NO ALTERATIONS MAY BE MADE TO THESE DRIVER UNITS!

Specifications
Power handling capacity ................................................................................... 30 watts continuous power
Impedance .................................................................................................................. 16 ohms (voice coil)
Frequency response.......................................................................................... 400 Hz to 3500 Hz (+6 dB)
Sensitivity.....................................................................104 dB SPL: 1 watt @ 1 meter, swept sine average
Conduit attachment ..............................................................Standard 1/2 inch NPT (1.27 cm) pipe conduit
Dimensions...................................... 8.45 (214.6) diameter × 8.86 (225) long including throat, inches (mm)
Shipping weight ...............................................................................................................12.8 lbs. (5.8 kg)
Material............................................................................................................Die cast aluminum housing
Finish ....................................................................................................................1 to 1.5 mil epoxy, gray
Horn coupling............................................................................. Standard 1-3/8 inch (3.5 cm) - 18 threads
Approval ...................... UL listed [E71922] for Div. 1, Class I, Groups B, C and D, Hazardous Gas Areas

CAUTION Installation must be in accordance with National Electrical Code for the
appropriate hazardous area classification.

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA


610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
VISIT WWW .GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Pub. DS13310-201
Model 13310-201 Explosion-proof Driver Page: 2 of 2

Figure 1. Front and Rear Halves of 13310-201 Driver Assembly

\\s_eng\gtcproddocs\standard ioms - current release\data sheets\ds13310-201.doc


04/06

You might also like