Professional Documents
Culture Documents
MSDS - Walter 15F
MSDS - Walter 15F
The content of this SDS is also valid in Spanish language to cover all Central, South America (except Brazil) and the
Caribbean countries.
Product Code : 06-B Enduro-Flex (454; 456; 458; 462; 504; 506; 508; 512; 604; 606; 608; 612)
15-R Enduro-Flex (454; 456; 458; 462; 504; 506; 508; 512; 604; 606; 608; 612; 704; 706; 708; 712)
07-Q Quick Step Flex (454; 456; 458; 462; 504; 506; 508; 512; 604; 606; 608; 612)
07-F Topcut drum belt (364; 504)
04-A Twist flap discs (254; 256; 258; 262)
04-D Twist Topcut sanding disc (203; 205; 206; 208; 210; 212; 303; 305; 306; 308; 310; 312)
09-A Spinlock Flap Discs (204; 206; 208; 212; 304; 306; 308; 312)
15-C Coolcut (452; 453; 454; 455; 456; 458; 460; 462; 502; 503; 504; 505; 506; 508; 510; 512; 702; 704; 705; 706;
708; 710; 712)
15-G Coolcut Flap Wheels (206; 208; 212; 306; 308; 312)
15-F Coolcut Mounted Flap Wheels (054; 056; 058; 062; 154; 156; 158; 162; 004; 006; 008; 012; 104; 106; 108;
112; 124; 204; 206; 208; 212; 304; 306; 308; 312; 324; 504; 506; 508; 512; 524; 704; 706; 708; 712; 804;
806; 808; 812; 824; 904; 906; 908; 912)
14-A Coolcut Sheets (904; 906; 908; 910; 912; 918; 924; 932)
14-B Inox+ File belt (033; 036; 038; 042; 053; 056; 058; 062; 103; 106; 108; 112; 123; 126; 128; 132)
14-C Coolcut Shop rolls (106; 108; 110; 112; 118; 124; 132; 206; 208; 210; 212; 218; 224; 232; 306; 308; 310;
312; 318; 324; 332)
14-D Topcut+ file belt (033; 036; 038; 053; 056; 058; 103; 106; 108; 123; 126; 128)
09-D Spinlock resin fibre disc (102; 103; 105; 106; 108; 112; 203; 205; 206; 208; 212; 403; 406; 408; 503; 506;
508)
SDS No : A-02E
Product type : Flap Discs, Sanding Discs, Drums, Shop Rolls, Drum Belts, File Belts
Page 1 sur 10
A-02E
OSHA/HCS Status : While this material is not considered hazardous by the OHSA Hazard Communication Standard (29 CFR
1910.1200), this SDS contains valuable information critical to the safe handling and proper use of the
product. This SDS should be retained and available for employees and other users of this product.
Precautionary Statements
General : Read Safety Data Sheet before use. Keep out of reach of children.
The greatest part of the projected dust during the work comes from the work piece and not from the product.
Hazardous Ingredients :
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to
health or the environment and hence require reporting in this section.
2
A-02E
Inhalation : Move victim to fresh air. If the victim still feels unwell, consult a physician.
Skin Contact : Wash gently and thoroughly with lukewarm, flowing water and non-abrasive soap for 5 minutes. If
signs/symptoms develop, consult a physician.
Eyes Contact : Flush the contaminated eye(s) with large amounts of clean water for 5 minutes while holding the eyelid(s)
open. Do not remove embedded objects. Continue rinsing. Consult physician if necessary.
Over-exposure signs/symptoms
None
3
A-02E
During combustion, toxic fumes may occur, use protective equipment. Decomposition products may include the following
material:
Not applicable
4
A-02E
Control parameters
The following table presents the limit for air contaminant from OSHA 1910-Z-1 Table.
Appropriate engineer control : General ventilation is adequate to evacuate the dust form the working area. With good
ventilation, the exposure of every ingredient should be below the limit. Make sure all the
equipment is in good condition.
5
A-02E
Appearance
Appearance : Clear
pH : Not available
6
A-02E
7
A-02E
Toxicity
Disposal methods : The generation of waste should be avoided or minimized wherever possible.
Disposal of this product, solutions and any by-products should comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Waste should not be disposed of
untreated to the sewer unless fully compliant with the requirements of all authorities
with jurisdiction. Waste packaging should be recycled. Incineration or landfill
should only be considered when recycling is not feasible. This material and its
container must be disposed of in a safe way. Empty containers or liners may retain
some product residues. Avoid dispersal of spilled material and runoff and contact
8
A-02E
Packing Group - - - -
Environmental Hazards No No No No
Additional Information - - - -
Hazard Categories : Fire Hazard – No, Pressure Hazard – No, Reactivity Hazard – No, Immediate Hazard –No, Delayed
Hazard – No.
WARNING: This product can expose you to chemicals including Formaldehyde, which are known to the State of
California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Chemical Inventories : This product is defined by TSCA regulations and is exempt from TSCA Inventory listing
requirements.
This SDS has been prepared to meet the U.S OSHA Hazard Communication Standard, 29 CFR 1910.1200.
9
A-02E
History
Version :3
Notice to reader:
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its
subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be
used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
10