Professional Documents
Culture Documents
Alstern Hot - Tapping
Alstern Hot - Tapping
Flow
Tee/ Branch
Valve
SERVICE DESCRIPTION
Hot tapping is a method of employing an under pressure drilling machine to cut a hole in
an operating pipeline or storage vessel which allows for a new branch connection from the
existing pipe or vessel without any interruption to the flow.
Line stopping is a procedure that temporarily stops flow in a operating pipeline without
depressurizing or purging, so that the isolated section of pipe can be repaired, replaced or
altered.
We are capable of providing hot tapping service for the following applications:
• Hot tapping of carbon steel, galvanized steel, stainless steel, fiberglass, copper
and brass pipes
• Wet tapping of cast iron, ductile iron and concrete pipes
• Tapping of pipeline diameter up to 48”
• Tapping of pipeline operating pressure up to 2,000 psig
• Tapping of pipeline temperature up to 300°C
• Tapping of pipeline containing oil, gas, water, steam or wastewater.
http://www.alstern-technologies.com/index_files/Hot_Tapping.htm 12/3/2012
Hot Tapping Page 2 of 2
Copyright © 2004 Alstern Technologies Singapore Pte. Ltd. All Rights Reserved. Email: alstern@singnet.com.sg
http://www.alstern-technologies.com/index_files/Hot_Tapping.htm 12/3/2012