Professional Documents
Culture Documents
Base de Plantador de Madeira Compensada
Base de Plantador de Madeira Compensada
Base de Plantador de Madeira Compensada
Page 1 of 6
SpencleyDesignCo.com @spencleydesignco
Spencley Design Co.
Sketch
Page 2 of 6
SpencleyDesignCo.com @spencleydesignco
Spencley Design Co.
Page 3 of 6
SpencleyDesignCo.com @spencleydesignco
Spencley Design Co.
Instructions
For a step-by-step instructional video, visit Spencley Design Co on YouTube!
1. Break down your plywood pieces for the legs down into rough geometry. Make sure to cut things oversize at
this point.
2. Using either plywood or MDF, we need to create a leg template. First, cut this template piece down to exact size
3. Cut your desired curve into the template piece. We chose to make a ½” curve
4. Place the template on top of an oversized leg piece and trace the pattern from the template
Page 4 of 6
SpencleyDesignCo.com @spencleydesignco
Spencley Design Co.
5. Remove the template, and remove the bulk of the excess material of the curve with a jigsaw or bandsaw
6. Place the template back on top of the leg piece, and use a router and flush trim big to perfectly trace the
template around the leg leaving the top and bottom mostly untouched.
Page 5 of 6
SpencleyDesignCo.com @spencleydesignco
Spencley Design Co.
10. Cut dado in both support pieces
---->
----->
Page 6 of 6
SpencleyDesignCo.com @spencleydesignco