Professional Documents
Culture Documents
CLASS 10 ELECTRICITY - Quizizz
CLASS 10 ELECTRICITY - Quizizz
CLASS 10 ELECTRICITY - Quizizz
2. How is a voltmeter connected in the circuit to measure the potential difference between two
points?
a) series b) parallel
c) according to the situation either series or d) none
parallel
a) volt b) coulomb
c) ampere d) ohm
a) ohm b) volt
c) ampere d) coulomb
5. An electric bulb is rated 220 V and 100 W. When it is operated on 110 V, power consumed will be ---
------------. [Use P = (V X V)/R]
a) 100 W b) 75 W
c) 50 W d) 25 W
6. The property of a conductor by which it obstructs the flow of current is known as ------------------ of
the conductor
a) voltage b) conductivity
c) power d) resistance
10. Keeping the potential difference constant, the resistance of the circuit is halved, the current will
become --------------
a) ampere b) volt
c) ohm d) coulomb
13. What is the maximum resistance which can be made using five resistor each of 1/5 ohm?
14. What is the minimum resistance which can be made using five resistors each of 1/5 ohm?
15. When a 4 ohm resistor is connected across the terminals of a 2 V battery, the number of
coulombs passing through the resistor per second is --------------
a) 0.5 b) 1
c) 2 d) 4
16. If the current flowing through a fixed resistor is halved, the heat produced in it will become ---------
--------
a) one-fourth b) one-half
c) double d) four times
a) conductor b) electrolyte
c) insulator d) none
18. The work done to bring unit positive charge from infinity to a point in an electric field is known as
----------
a) potential b) resistance
c) current d) charge
19. An electric iron of resistance 20 ohm takes a current of 5 A. Calculate the heat developed in 30 s.
[Use H = I X I X R X t]
a) 5 A b) 6 A
c) 3.4 A d) 7 A
21. Calculate the amount of charge that would flow in 1 hour through the element of an electric bulb
drawing a current of 0.2 A. [Use I = Q/t]
a) 300 C b) 320 C
c) 700 C d) 720 C
22. Calculate resistance of an electric bulb which allows a 10 A current when connected to 220 V
power source. [Use V = IR]
a) 10 ohm b) 12 ohm
c) 22 ohm d) 32 ohm
23. When a 12 V battery is connected across an unknown resistor, there is a current 2.5 mA in the
circuit. Find the value of resistance of the resistor. [Use V = IR]