Professional Documents
Culture Documents
Add E-Key
Add E-Key
Add e-Key
NOTICE! The ignition must be on and engine(s) stopped.
Up to four e-Keys can be added.
1. Move control to neu- 2. Turn the ignition on. 3. Scroll the menu. 4. Settings.
tral.
5. Confirm with OK. 6. Scroll to the e-Key 7. Confirm with OK. 8. When previous e-Key
management menu. exists, confirm it before
step 9.
IGNITION IGNITION
START/STOP START/STOP
9. Select Add e-Key. 10. Confirm with OK. 11. Show e-Key To Add. 12. Hold the new e-Key in
front of the Start/Stop
panel.
IGNITION IGNITION
START/STOP START/STOP
13. e-Key added. 14. Repeat step(s) 9–13 15. NOTICE! A valid e- 16. Ignition must be turned
Remaining available for additional e-Keys. Key is required as off for at least 15 seconds
locations for e-Key in authorization for future to confirm the calibration.
display. e-Key Management.