Professional Documents
Culture Documents
Vnet
Vnet
Vnet
A virtual network enables Azure resources, such as virtual machines (VM), to communicate privately
with each other, and with the internet.
Subnetting
Routing table
Routing table is a set of rules, often viewed in table format, that is used to determine where
data packets traveling over an Internet Protocol (IP) network will be directed. All IP-enabled
devices, including routers and switches, use routing tables.
1. Select + Create a resource on the upper, left corner of the Azure portal.
2. Select Networking, and then select Virtual network.
3. Enter, or select, the following information, accept the defaults for the remaining settings, and
then select Create:
Setting Value
Name myVirtualNetwork
Subscription Select your subscription.
Resource group Select Create new and enter
myResourceGroup.
Location Select East US.
If we have DNS server in azure , we need to give that IP address in vnet network only , then only
that OS will take DNS IP
1. Select a network , which we are going to do peering and same step in another network also .
2. Another below three configuration is for forwarded traffic to allow all traffic in both VNET ,
Gateway transit is to allow a internet gateway – normally in VNET default internet gateway will
available while we connecting two other network , we need a gateway transit , use remote
gateway is used to remote gateway form another VNET